[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <973c244e-77e6-4c60-ac17-b7a4ffe85488@ti.com>
Date: Wed, 31 Jul 2024 09:46:35 -0500
From: Andrew Davis <afd@...com>
To: Manorit Chawdhry <m-chawdhry@...com>, Nishanth Menon <nm@...com>,
Vignesh
Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Udit Kumar <u-kumar1@...com>,
Neha Malcom
Francis <n-francis@...com>,
Aniket Limaye <a-limaye@...com>
Subject: Re: [PATCH v2 3/3] arm64: dts: ti: Add support for J742S2 EVM board
On 7/30/24 2:13 AM, Manorit Chawdhry wrote:
> J742S2 EVM board is designed for TI J742S2 SoC. It supports the following
> interfaces:
> * 16 GB DDR4 RAM
> * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
> * x1 Input Audio Jack, x1 Output Audio Jack
> * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
> * x1 4L PCIe connector
> * x1 UHS-1 capable micro-SD card slot
> * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
> UFS flash.
> * x6 UART through UART-USB bridge
> * XDS110 for onboard JTAG debug using USB
> * Temperature sensors, user push buttons and LEDs
> * x1 GESI expander, x2 Display connector
> * x1 15-pin CSI header
> * x6 MCAN instances
>
> Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
> Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
> Signed-off-by: Manorit Chawdhry <m-chawdhry@...com>
> ---
> arch/arm64/boot/dts/ti/Makefile | 3 +
> arch/arm64/boot/dts/ti/k3-j742s2-evm.dts | 26 +
> arch/arm64/boot/dts/ti/k3-j784s4-evm-common.dtsi | 1436 +++++++++++++++++++++
Seems git is not seeing that this is a copy.
When you do format-patch try using "-C".
Andrew
Powered by blists - more mailing lists