lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240731-b4-upstream-j742s2-v3-5-da7fe3aa9e90@ti.com>
Date: Wed, 31 Jul 2024 22:40:31 +0530
From: Manorit Chawdhry <m-chawdhry@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Tero
 Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof
 Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Udit Kumar <u-kumar1@...com>,
        Neha Malcom
 Francis <n-francis@...com>,
        Aniket Limaye <a-limaye@...com>, Manorit Chawdhry
	<m-chawdhry@...com>
Subject: [PATCH v3 5/9] arm64: dts: ti: Move k3-j784s4-evm.dts to
 k3-j784s4-j742s2-evm-common.dtsi

This is to introduce j742s2 support later, things from here will be
moved to appropriate location.

File k3-j784s4-evm.dts is not exactly removed as the name of DTS files
shouldn't change mid refactor commits. Hence to keep the compatibility,
after moving; k3-j784s4-evm.dts is including
k3-j784s4-j742s2-evm-common.dtsi

Signed-off-by: Manorit Chawdhry <m-chawdhry@...com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts           | 1471 +------------------
 .../boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi   | 1477 ++++++++++++++++++++
 2 files changed, 1478 insertions(+), 1470 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index ffa38f41679d..e3730b2bca92 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -5,1473 +5,4 @@
  * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
  */
 
-/dts-v1/;
-
-#include <dt-bindings/net/ti-dp83867.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "k3-j784s4.dtsi"
-
-/ {
-	compatible = "ti,j784s4-evm", "ti,j784s4";
-	model = "Texas Instruments J784S4 EVM";
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart8;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		i2c0 = &wkup_i2c0;
-		i2c3 = &main_i2c0;
-		ethernet0 = &mcu_cpsw_port1;
-		ethernet1 = &main_cpsw1_port1;
-	};
-
-	memory@...00000 {
-		device_type = "memory";
-		bootph-all;
-		/* 32G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
-		      <0x00000008 0x80000000 0x00000007 0x80000000>;
-	};
-
-	reserved_memory: reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		secure_ddr: optee@...00000 {
-			reg = <0x00 0x9e800000 0x00 0x01800000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa0000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa0100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_memory_region: r5f-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_2_dma_memory_region: c71-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_2_memory_region: c71-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_3_dma_memory_region: c71-dma-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_3_memory_region: c71-memory@...00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab100000 0x00 0xf00000>;
-			no-map;
-		};
-	};
-
-	evm_12v0: regulator-evm12v0 {
-		/* main supply */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_3v3: regulator-vsys3v3 {
-		/* Output of LM5140 */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_5v0: regulator-vsys5v0 {
-		/* Output of LM5140 */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_mmc1: regulator-sd {
-		/* Output of TPS22918 */
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_mmc1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		vin-supply = <&vsys_3v3>;
-		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	vdd_sd_dv: regulator-TLV71033 {
-		/* Output of TLV71033 */
-		compatible = "regulator-gpio";
-		regulator-name = "tlv71033";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vdd_sd_dv_pins_default>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		vin-supply = <&vsys_5v0>;
-		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0>,
-			 <3300000 0x1>;
-	};
-
-	dp0_pwr_3v3: regulator-dp0-prw {
-		compatible = "regulator-fixed";
-		regulator-name = "dp0-pwr";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	dp0: connector-dp0 {
-		compatible = "dp-connector";
-		label = "DP0";
-		type = "full-size";
-		dp-pwr-supply = <&dp0_pwr_3v3>;
-
-		port {
-			dp0_connector_in: endpoint {
-				remote-endpoint = <&dp0_out>;
-			};
-		};
-	};
-
-	transceiver0: can-phy0 {
-		compatible = "ti,tcan1042";
-		#phy-cells = <0>;
-		max-bitrate = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
-		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>;
-	};
-
-	transceiver1: can-phy1 {
-		compatible = "ti,tcan1042";
-		#phy-cells = <0>;
-		max-bitrate = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
-		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	transceiver2: can-phy2 {
-		/* standby pin has been grounded by default */
-		compatible = "ti,tcan1042";
-		#phy-cells = <0>;
-		max-bitrate = <5000000>;
-	};
-
-	transceiver3: can-phy3 {
-		compatible = "ti,tcan1042";
-		#phy-cells = <0>;
-		max-bitrate = <5000000>;
-		standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
-		mux-states = <&mux1 1>;
-	};
-
-	mux1: mux-controller {
-		compatible = "gpio-mux";
-		#mux-state-cells = <1>;
-		mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>;
-		idle-state = <1>;
-	};
-
-	codec_audio: sound {
-		compatible = "ti,j7200-cpb-audio";
-		model = "j784s4-cpb";
-
-		ti,cpb-mcasp = <&mcasp0>;
-		ti,cpb-codec = <&pcm3168a_1>;
-
-		clocks = <&k3_clks 265 0>, <&k3_clks 265 1>,
-			 <&k3_clks 157 34>, <&k3_clks 157 63>;
-		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
-			      "cpb-codec-scki", "cpb-codec-scki-48000";
-	};
-};
-
-&wkup_gpio0 {
-	status = "okay";
-};
-
-&main_pmx0 {
-	bootph-all;
-	main_cpsw2g_default_pins: main-cpsw2g-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
-			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
-			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
-			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
-			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
-			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
-			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
-			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
-			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
-			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
-			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
-			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
-		>;
-	};
-
-	main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
-			J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
-		>;
-	};
-
-	main_uart8_pins_default: main-uart8-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
-			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
-			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
-			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
-		>;
-	};
-
-	main_i2c0_pins_default: main-i2c0-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
-			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
-		>;
-	};
-
-	main_i2c5_pins_default: main-i2c5-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */
-			J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */
-		>;
-	};
-
-	main_mmc1_pins_default: main-mmc1-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
-			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
-			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
-			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
-			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
-			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
-			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
-			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
-		>;
-	};
-
-	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
-		>;
-	};
-
-	dp0_pins_default: dp0-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
-		>;
-	};
-
-	main_i2c4_pins_default: main-i2c4-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
-			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
-		>;
-	};
-
-	main_mcan4_pins_default: main-mcan4-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */
-			J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */
-		>;
-	};
-
-	main_mcan16_pins_default: main-mcan16-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */
-			J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */
-		>;
-	};
-
-	main_usbss0_pins_default: main-usbss0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
-		>;
-	};
-
-	main_i2c3_pins_default: main-i2c3-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */
-			J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */
-		>;
-	};
-
-	main_mcasp0_pins_default: main-mcasp0-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */
-			J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */
-			J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */
-			J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */
-		>;
-	};
-
-	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
-		pinctrl-single,pins = <
-			J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */
-		>;
-	};
-};
-
-&wkup_pmx2 {
-	bootph-all;
-	wkup_uart0_pins_default: wkup-uart0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
-		>;
-	};
-
-	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
-		>;
-	};
-
-	mcu_uart0_pins_default: mcu-uart0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
-			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
-			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
-			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
-		>;
-	};
-
-	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
-			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
-			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
-			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
-			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
-			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
-			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
-			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
-			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
-			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
-			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
-			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
-		>;
-	};
-
-	mcu_mdio_pins_default: mcu-mdio-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
-			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
-		>;
-	};
-
-	mcu_adc0_pins_default: mcu-adc0-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
-			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
-			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
-			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
-			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
-			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
-			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
-			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
-		>;
-	};
-
-	mcu_adc1_pins_default: mcu-adc1-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
-			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
-			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
-			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
-			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
-			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
-			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
-			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
-		>;
-	};
-
-	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
-			J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
-		>;
-	};
-
-	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
-			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
-		>;
-	};
-
-	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */
-		>;
-	};
-
-	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
-		>;
-	};
-};
-
-&wkup_pmx1 {
-	status = "okay";
-
-	pmic_irq_pins_default: pmic-irq-default-pins {
-		pinctrl-single,pins = <
-			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
-			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
-		>;
-	};
-};
-
-&wkup_pmx0 {
-	bootph-all;
-	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
-			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
-			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
-			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
-			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
-			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
-			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
-			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
-			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
-			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
-			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
-		>;
-	};
-};
-
-&wkup_pmx1 {
-	bootph-all;
-	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
-			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
-		>;
-	};
-
-	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
-			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
-			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
-			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
-			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
-			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
-			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
-			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
-		>;
-	};
-};
-
-&wkup_uart0 {
-	/* Firmware usage */
-	status = "reserved";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_uart0_pins_default>;
-};
-
-&wkup_i2c0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_i2c0_pins_default>;
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		/* CAV24C256WE-GT3 */
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	tps659413: pmic@48 {
-		compatible = "ti,tps6594-q1";
-		reg = <0x48>;
-		system-power-controller;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_irq_pins_default>;
-		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ti,primary-pmic;
-		buck12-supply = <&vsys_3v3>;
-		buck3-supply = <&vsys_3v3>;
-		buck4-supply = <&vsys_3v3>;
-		buck5-supply = <&vsys_3v3>;
-		ldo1-supply = <&vsys_3v3>;
-		ldo2-supply = <&vsys_3v3>;
-		ldo3-supply = <&vsys_3v3>;
-		ldo4-supply = <&vsys_3v3>;
-
-		regulators {
-			bucka12: buck12 {
-				regulator-name = "vdd_ddr_1v1";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bucka3: buck3 {
-				regulator-name = "vdd_ram_0v85";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bucka4: buck4 {
-				regulator-name = "vdd_io_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bucka5: buck5 {
-				regulator-name = "vdd_mcu_0v85";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldoa1: ldo1 {
-				regulator-name = "vdd_mcuio_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldoa2: ldo2 {
-				regulator-name = "vdd_mcuio_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldoa3: ldo3 {
-				regulator-name = "vds_dll_0v8";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldoa4: ldo4 {
-				regulator-name = "vda_mcu_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	tps62873a: regulator@40 {
-		compatible = "ti,tps62873";
-		reg = <0x40>;
-		bootph-pre-ram;
-		regulator-name = "VDD_CPU_AVS";
-		regulator-min-microvolt = <750000>;
-		regulator-max-microvolt = <1330000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	tps62873b: regulator@43 {
-		compatible = "ti,tps62873";
-		reg = <0x43>;
-		regulator-name = "VDD_CORE_0V8";
-		regulator-min-microvolt = <760000>;
-		regulator-max-microvolt = <840000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&mcu_uart0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_uart0_pins_default>;
-};
-
-&main_uart8 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart8_pins_default>;
-};
-
-&ufs_wrapper {
-	status = "okay";
-};
-
-&fss {
-	bootph-all;
-	status = "okay";
-};
-
-&ospi0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
-
-	flash@0 {
-		bootph-all;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-tx-bus-width = <8>;
-		spi-rx-bus-width = <8>;
-		spi-max-frequency = <25000000>;
-		cdns,tshsl-ns = <60>;
-		cdns,tsd2d-ns = <60>;
-		cdns,tchsh-ns = <60>;
-		cdns,tslch-ns = <60>;
-		cdns,read-delay = <4>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ospi.tiboot3";
-				reg = <0x0 0x80000>;
-			};
-
-			partition@...00 {
-				label = "ospi.tispl";
-				reg = <0x80000 0x200000>;
-			};
-
-			partition@...000 {
-				label = "ospi.u-boot";
-				reg = <0x280000 0x400000>;
-			};
-
-			partition@...000 {
-				label = "ospi.env";
-				reg = <0x680000 0x40000>;
-			};
-
-			partition@...000 {
-				label = "ospi.env.backup";
-				reg = <0x6c0000 0x40000>;
-			};
-
-			partition@...000 {
-				label = "ospi.rootfs";
-				reg = <0x800000 0x37c0000>;
-			};
-
-			partition@...0000 {
-				bootph-all;
-				label = "ospi.phypattern";
-				reg = <0x3fc0000 0x40000>;
-			};
-		};
-	};
-};
-
-&ospi1 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
-
-	flash@0 {
-		bootph-all;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <40000000>;
-		cdns,tshsl-ns = <60>;
-		cdns,tsd2d-ns = <60>;
-		cdns,tchsh-ns = <60>;
-		cdns,tslch-ns = <60>;
-		cdns,read-delay = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "qspi.tiboot3";
-				reg = <0x0 0x80000>;
-			};
-
-			partition@...00 {
-				label = "qspi.tispl";
-				reg = <0x80000 0x200000>;
-			};
-
-			partition@...000 {
-				label = "qspi.u-boot";
-				reg = <0x280000 0x400000>;
-			};
-
-			partition@...000 {
-				label = "qspi.env";
-				reg = <0x680000 0x40000>;
-			};
-
-			partition@...000 {
-				label = "qspi.env.backup";
-				reg = <0x6c0000 0x40000>;
-			};
-
-			partition@...000 {
-				label = "qspi.rootfs";
-				reg = <0x800000 0x37c0000>;
-			};
-
-			partition@...0000 {
-				bootph-all;
-				label = "qspi.phypattern";
-				reg = <0x3fc0000 0x40000>;
-			};
-		};
-
-	};
-};
-
-&main_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c0_pins_default>;
-
-	clock-frequency = <400000>;
-
-	exp1: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
-				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
-				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
-				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
-				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
-
-		p12-hog {
-			/* P12 - AUDIO_MUX_SEL */
-			gpio-hog;
-			gpios = <12 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "AUDIO_MUX_SEL";
-		};
-	};
-
-	exp2: gpio@22 {
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
-				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
-				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
-				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
-				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
-				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
-				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
-				  "USER_INPUT1", "USER_LED1", "USER_LED2";
-
-		p13-hog {
-			/* P13 - CANUART_MUX_SEL0 */
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "CANUART_MUX_SEL0";
-		};
-
-		p15-hog {
-			/* P15 - CANUART_MUX1_SEL1 */
-			gpio-hog;
-			gpios = <15 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "CANUART_MUX1_SEL1";
-		};
-	};
-};
-
-&main_i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c5_pins_default>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	exp5: gpio@20 {
-		compatible = "ti,tca6408";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
-				  "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3",
-				  "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
-				  "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
-	};
-};
-
-&main_sdhci0 {
-	bootph-all;
-	/* eMMC */
-	status = "okay";
-	non-removable;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
-};
-
-&main_sdhci1 {
-	bootph-all;
-	/* SD card */
-	status = "okay";
-	pinctrl-0 = <&main_mmc1_pins_default>;
-	pinctrl-names = "default";
-	disable-wp;
-	vmmc-supply = <&vdd_mmc1>;
-	vqmmc-supply = <&vdd_sd_dv>;
-};
-
-&main_gpio0 {
-	status = "okay";
-};
-
-&mcu_cpsw {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_cpsw_pins_default>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_mdio_pins_default>;
-
-	mcu_phy0: ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,min-output-impedance;
-	};
-};
-
-&mcu_cpsw_port1 {
-	status = "okay";
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&mcu_phy0>;
-};
-
-&main_cpsw1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_cpsw2g_default_pins>;
-	status = "okay";
-};
-
-&main_cpsw1_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
-	status = "okay";
-
-	main_cpsw1_phy0: ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,min-output-impedance;
-	};
-};
-
-&main_cpsw1_port1 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&main_cpsw1_phy0>;
-	status = "okay";
-};
-
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster5 {
-	status = "okay";
-	interrupts = <416>;
-
-	mbox_c71_2: mbox-c71-2 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_3: mbox-c71-3 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
-	memory-region = <&main_r5fss2_core0_dma_memory_region>,
-			<&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
-	memory-region = <&main_r5fss2_core1_dma_memory_region>,
-			<&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
-
-&c71_2 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
-	memory-region = <&c71_2_dma_memory_region>,
-			<&c71_2_memory_region>;
-};
-
-&c71_3 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
-	memory-region = <&c71_3_dma_memory_region>,
-			<&c71_3_memory_region>;
-};
-
-&tscadc0 {
-	pinctrl-0 = <&mcu_adc0_pins_default>;
-	pinctrl-names = "default";
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&tscadc1 {
-	pinctrl-0 = <&mcu_adc1_pins_default>;
-	pinctrl-names = "default";
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&serdes_refclk {
-	status = "okay";
-	clock-frequency = <100000000>;
-};
-
-&dss {
-	status = "okay";
-	assigned-clocks = <&k3_clks 218 2>,
-			  <&k3_clks 218 5>,
-			  <&k3_clks 218 14>,
-			  <&k3_clks 218 18>;
-	assigned-clock-parents = <&k3_clks 218 3>,
-				 <&k3_clks 218 7>,
-				 <&k3_clks 218 16>,
-				 <&k3_clks 218 22>;
-};
-
-&serdes0 {
-	status = "okay";
-
-	serdes0_pcie1_link: phy@0 {
-		reg = <0>;
-		cdns,num-lanes = <2>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
-	};
-
-	serdes0_usb_link: phy@3 {
-		reg = <3>;
-		cdns,num-lanes = <1>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_USB3>;
-		resets = <&serdes_wiz0 4>;
-	};
-};
-
-&serdes_wiz0 {
-	status = "okay";
-};
-
-&usb_serdes_mux {
-	idle-states = <0>; /* USB0 to SERDES lane 3 */
-};
-
-&usbss0 {
-	status = "okay";
-	pinctrl-0 = <&main_usbss0_pins_default>;
-	pinctrl-names = "default";
-	ti,vbus-divider;
-};
-
-&usb0 {
-	dr_mode = "otg";
-	maximum-speed = "super-speed";
-	phys = <&serdes0_usb_link>;
-	phy-names = "cdns3,usb3-phy";
-};
-
-&serdes_wiz4 {
-	status = "okay";
-};
-
-&serdes4 {
-	status = "okay";
-	serdes4_dp_link: phy@0 {
-		reg = <0>;
-		cdns,num-lanes = <4>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_DP>;
-		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
-			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
-	};
-};
-
-&mhdp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp0_pins_default>;
-	phys = <&serdes4_dp_link>;
-	phy-names = "dpphy";
-};
-
-&dss_ports {
-	/* DP */
-	port {
-		dpi0_out: endpoint {
-			remote-endpoint = <&dp0_in>;
-		};
-	};
-};
-
-&main_i2c4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c4_pins_default>;
-	clock-frequency = <400000>;
-
-	exp4: gpio@20 {
-		compatible = "ti,tca6408";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&dp0_ports {
-	port@0 {
-		reg = <0>;
-
-		dp0_in: endpoint {
-			remote-endpoint = <&dpi0_out>;
-		};
-	};
-
-	port@4 {
-		reg = <4>;
-
-		dp0_out: endpoint {
-			remote-endpoint = <&dp0_connector_in>;
-		};
-	};
-};
-
-&mcu_mcan0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_mcan0_pins_default>;
-	phys = <&transceiver0>;
-};
-
-&mcu_mcan1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_mcan1_pins_default>;
-	phys = <&transceiver1>;
-};
-
-&main_mcan16 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mcan16_pins_default>;
-	phys = <&transceiver2>;
-};
-
-&main_mcan4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mcan4_pins_default>;
-	phys = <&transceiver3>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	num-lanes = <2>;
-	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes0_pcie1_link>;
-	phy-names = "pcie-phy";
-};
-
-&serdes1 {
-	status = "okay";
-
-	serdes1_pcie0_link: phy@0 {
-		reg = <0>;
-		cdns,num-lanes = <2>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
-	};
-};
-
-&serdes_wiz1 {
-	status = "okay";
-};
-
-&pcie0_rc {
-	status = "okay";
-	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes1_pcie0_link>;
-	phy-names = "pcie-phy";
-};
-
-&k3_clks {
-	/* Confiure AUDIO_EXT_REFCLK1 pin as output */
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
-};
-
-&main_i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c3_pins_default>;
-	clock-frequency = <400000>;
-
-	exp3: gpio@20 {
-		compatible = "ti,tca6408";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pcm3168a_1: audio-codec@44 {
-		compatible = "ti,pcm3168a";
-		reg = <0x44>;
-		#sound-dai-cells = <1>;
-		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
-		clocks = <&audio_refclk1>;
-		clock-names = "scki";
-		VDD1-supply = <&vsys_3v3>;
-		VDD2-supply = <&vsys_3v3>;
-		VCCAD1-supply = <&vsys_5v0>;
-		VCCAD2-supply = <&vsys_5v0>;
-		VCCDA1-supply = <&vsys_5v0>;
-		VCCDA2-supply = <&vsys_5v0>;
-	};
-};
-
-&mcasp0 {
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mcasp0_pins_default>;
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	auxclk-fs-ratio = <256>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 0 1
-		2 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-};
+#include "k3-j784s4-j742s2-evm-common.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
new file mode 100644
index 000000000000..ffa38f41679d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -0,0 +1,1477 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	compatible = "ti,j784s4-evm", "ti,j784s4";
+	model = "Texas Instruments J784S4 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c3 = &main_i2c0;
+		ethernet0 = &mcu_cpsw_port1;
+		ethernet1 = &main_cpsw1_port1;
+	};
+
+	memory@...00000 {
+		device_type = "memory";
+		bootph-all;
+		/* 32G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000007 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@...00000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_memory_region: r5f-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_2_dma_memory_region: c71-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_2_memory_region: c71-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_3_dma_memory_region: c71-dma-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_3_memory_region: c71-memory@...00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: regulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp0_pwr_3v3: regulator-dp0-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	dp0: connector-dp0 {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	transceiver0: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux1 1>;
+	};
+
+	mux1: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>;
+		idle-state = <1>;
+	};
+
+	codec_audio: sound {
+		compatible = "ti,j7200-cpb-audio";
+		model = "j784s4-cpb";
+
+		ti,cpb-mcasp = <&mcasp0>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 265 0>, <&k3_clks 265 1>,
+			 <&k3_clks 157 34>, <&k3_clks 157 63>;
+		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
+			      "cpb-codec-scki", "cpb-codec-scki-48000";
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&main_pmx0 {
+	bootph-all;
+	main_cpsw2g_default_pins: main-cpsw2g-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
+			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
+			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
+			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
+			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
+			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
+			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
+			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
+			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
+			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
+			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
+			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+
+	main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
+			J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
+	main_uart8_pins_default: main-uart8-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
+			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */
+			J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
+			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
+		>;
+	};
+
+	main_mcan4_pins_default: main-mcan4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */
+			J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */
+			J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */
+			J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */
+		>;
+	};
+
+	main_mcasp0_pins_default: main-mcasp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */
+			J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */
+			J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */
+			J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */
+		>;
+	};
+
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
+			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
+			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
+			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
+			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
+			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
+			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
+			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
+			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
+			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
+			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
+			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
+			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
+			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
+			J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
+			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	bootph-all;
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	bootph-all;
+	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
+			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
+			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
+			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps62873a: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		bootph-pre-ram;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	tps62873b: regulator@43 {
+		compatible = "ti,tps62873";
+		reg = <0x43>;
+		regulator-name = "VDD_CORE_0V8";
+		regulator-min-microvolt = <760000>;
+		regulator-max-microvolt = <840000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&mcu_uart0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&ufs_wrapper {
+	status = "okay";
+};
+
+&fss {
+	bootph-all;
+	status = "okay";
+};
+
+&ospi0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@...00 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@...000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@...000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@...0000 {
+				bootph-all;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&ospi1 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@...00 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@...000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@...000 {
+				label = "qspi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "qspi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@...0000 {
+				bootph-all;
+				label = "qspi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
+				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
+				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
+				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
+				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
+
+		p12-hog {
+			/* P12 - AUDIO_MUX_SEL */
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "AUDIO_MUX_SEL";
+		};
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
+				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
+				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
+				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
+				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
+				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
+				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
+				  "USER_INPUT1", "USER_LED1", "USER_LED2";
+
+		p13-hog {
+			/* P13 - CANUART_MUX_SEL0 */
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "CANUART_MUX_SEL0";
+		};
+
+		p15-hog {
+			/* P15 - CANUART_MUX1_SEL1 */
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "CANUART_MUX1_SEL1";
+		};
+	};
+};
+
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
+				  "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3",
+				  "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
+				  "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
+	};
+};
+
+&main_sdhci0 {
+	bootph-all;
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	bootph-all;
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
+
+&main_cpsw1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_default_pins>;
+	status = "okay";
+};
+
+&main_cpsw1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
+	status = "okay";
+
+	main_cpsw1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&main_cpsw1_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&main_cpsw1_phy0>;
+	status = "okay";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
+
+&c71_3 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+};
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&dss {
+	status = "okay";
+	assigned-clocks = <&k3_clks 218 2>,
+			  <&k3_clks 218 5>,
+			  <&k3_clks 218 14>,
+			  <&k3_clks 218 18>;
+	assigned-clock-parents = <&k3_clks 218 3>,
+				 <&k3_clks 218 7>,
+				 <&k3_clks 218 16>,
+				 <&k3_clks 218 22>;
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie1_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_usb_link: phy@3 {
+		reg = <3>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 4>;
+	};
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <0>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+	serdes4_dp_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+	};
+};
+
+&mhdp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+	phys = <&serdes4_dp_link>;
+	phy-names = "dpphy";
+};
+
+&dss_ports {
+	/* DP */
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dp0_ports {
+	port@0 {
+		reg = <0>;
+
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		dp0_out: endpoint {
+			remote-endpoint = <&dp0_connector_in>;
+		};
+	};
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver0>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&main_mcan16 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan4_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	num-lanes = <2>;
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie1_link>;
+	phy-names = "pcie-phy";
+};
+
+&serdes1 {
+	status = "okay";
+
+	serdes1_pcie0_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie0_link>;
+	phy-names = "pcie-phy";
+};
+
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK1 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+		#sound-dai-cells = <1>;
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+		clocks = <&audio_refclk1>;
+		clock-names = "scki";
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&mcasp0 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp0_pins_default>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 1
+		2 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+};

-- 
2.45.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ