[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240731222831.14895-4-james.quinlan@broadcom.com>
Date: Wed, 31 Jul 2024 18:28:17 -0400
From: Jim Quinlan <james.quinlan@...adcom.com>
To: linux-pci@...r.kernel.org,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Cyril Brulebois <kibi@...ian.org>,
Stanimir Varbanov <svarbanov@...e.de>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
bcm-kernel-feedback-list@...adcom.com,
jim2101024@...il.com,
james.quinlan@...adcom.com
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v5 03/12] PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
o Move the clk_prepare_enable() below the resource allocations.
o Move the clk_prepare_enable() out of __brcm_pcie_remove() but
add it to the end of brcm_pcie_remove().
o Add a jump target (clk_disable_unprepare) so that a bit of exception
handling can be better reused at the end of this function implementation.
o Use dev_err_probe() where it makes sense.
Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
---
drivers/pci/controller/pcie-brcmstb.c | 34 ++++++++++++---------------
1 file changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index c08683febdd4..7595e7009192 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1473,7 +1473,6 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
dev_err(pcie->dev, "Could not stop phy\n");
if (reset_control_rearm(pcie->rescal))
dev_err(pcie->dev, "Could not rearm rescal reset\n");
- clk_disable_unprepare(pcie->clk);
}
static void brcm_pcie_remove(struct platform_device *pdev)
@@ -1484,6 +1483,7 @@ static void brcm_pcie_remove(struct platform_device *pdev)
pci_stop_root_bus(bridge->bus);
pci_remove_root_bus(bridge->bus);
__brcm_pcie_remove(pcie);
+ clk_disable_unprepare(pcie->clk);
}
static const int pcie_offsets[] = {
@@ -1613,31 +1613,26 @@ static int brcm_pcie_probe(struct platform_device *pdev)
pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
- ret = clk_prepare_enable(pcie->clk);
- if (ret) {
- dev_err(&pdev->dev, "could not enable clock\n");
- return ret;
- }
pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
- if (IS_ERR(pcie->rescal)) {
- clk_disable_unprepare(pcie->clk);
+ if (IS_ERR(pcie->rescal))
return PTR_ERR(pcie->rescal);
- }
+
pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
- if (IS_ERR(pcie->perst_reset)) {
- clk_disable_unprepare(pcie->clk);
+ if (IS_ERR(pcie->perst_reset))
return PTR_ERR(pcie->perst_reset);
- }
- ret = reset_control_reset(pcie->rescal);
+ ret = clk_prepare_enable(pcie->clk);
if (ret)
- dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
+ return dev_err_probe(&pdev->dev, ret, "could not enable clock\n");
+
+ ret = reset_control_reset(pcie->rescal);
+ if (dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"))
+ goto clk_disable_unprepare;
ret = brcm_phy_start(pcie);
if (ret) {
reset_control_rearm(pcie->rescal);
- clk_disable_unprepare(pcie->clk);
- return ret;
+ goto clk_disable_unprepare;
}
ret = brcm_pcie_setup(pcie);
@@ -1654,10 +1649,8 @@ static int brcm_pcie_probe(struct platform_device *pdev)
msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
if (pci_msi_enabled() && msi_np == pcie->np) {
ret = brcm_pcie_enable_msi(pcie);
- if (ret) {
- dev_err(pcie->dev, "probe of internal MSI failed");
+ if (dev_err_probe(pcie->dev, ret, "probe of internal MSI failed"))
goto fail;
- }
}
bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
@@ -1678,6 +1671,9 @@ static int brcm_pcie_probe(struct platform_device *pdev)
fail:
__brcm_pcie_remove(pcie);
+clk_disable_unprepare:
+ clk_disable_unprepare(pcie->clk);
+
return ret;
}
--
2.17.1
Powered by blists - more mailing lists