| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<CO6PR12MB5489996666D6EE16982E6E94FCB12@CO6PR12MB5489.namprd12.prod.outlook.com>
Date: Wed, 31 Jul 2024 05:36:33 +0000
From: "Lin, Wayne" <Wayne.Lin@....com>
To: Kevin Holm <kevin@...m.dev>, "stable@...r.kernel.org"
<stable@...r.kernel.org>
CC: "regressions@...ts.linux.dev" <regressions@...ts.linux.dev>,
"amd-gfx@...ts.freedesktop.org" <amd-gfx@...ts.freedesktop.org>, ML dri-devel
<dri-devel@...ts.freedesktop.org>, LKML <linux-kernel@...r.kernel.org>, "Zuo,
Jerry" <Jerry.Zuo@....com>, "Mohamed, Zaeem" <Zaeem.Mohamed@....com>,
"Wheeler, Daniel" <Daniel.Wheeler@....com>, "Deucher, Alexander"
<Alexander.Deucher@....com>
Subject: RE: [PATCH 6.10] drm/amd/display: Refactor function
dm_dp_mst_is_port_support_mode()
[Public]
Thanks for the help Kevin! It looks good to me.
Regards,
Wayne Lin
> -----Original Message-----
> From: Kevin Holm <kevin@...m.dev>
> Sent: Wednesday, July 31, 2024 2:54 AM
> To: stable@...r.kernel.org
> Cc: regressions@...ts.linux.dev; amd-gfx@...ts.freedesktop.org; ML dri-devel
> <dri-devel@...ts.freedesktop.org>; LKML <linux-kernel@...r.kernel.org>; Lin,
> Wayne <Wayne.Lin@....com>; Zuo, Jerry <Jerry.Zuo@....com>;
> Mohamed, Zaeem <Zaeem.Mohamed@....com>; Wheeler, Daniel
> <Daniel.Wheeler@....com>; Deucher, Alexander
> <Alexander.Deucher@....com>; Kevin Holm <kevin@...m.dev>
> Subject: [PATCH 6.10] drm/amd/display: Refactor function
> dm_dp_mst_is_port_support_mode()
>
> From: Wayne Lin <wayne.lin@....com>
>
> [ Upstream commit fa57924c76d995e87ca3533ec60d1d5e55769a27 ]
>
> [Why]
> dm_dp_mst_is_port_support_mode() is a bit not following the original design
> rule and cause light up issue with multiple 4k monitors after mst dsc hub.
>
> [How]
> Refactor function dm_dp_mst_is_port_support_mode() a bit to solve the light
> up issue.
>
> Reviewed-by: Jerry Zuo <jerry.zuo@....com>
> Acked-by: Zaeem Mohamed <zaeem.mohamed@....com>
> Signed-off-by: Wayne Lin <wayne.lin@....com>
> Tested-by: Daniel Wheeler <daniel.wheeler@....com>
> Signed-off-by: Alex Deucher <alexander.deucher@....com>
> [kevin@...m.dev: Resolved merge conflict in .../amdgpu_dm_mst_types.c]
> Fixes: 4df96ba6676034 ("drm/amd/display: Add timing pixel encoding for
> mst mode validation")
> Link:
> https://lore.kernel.org/stable/d74a7768e957e6ce88c27a5bece0c64dff132e
> 24@...m.dev/T/#u
> Signed-off-by: Kevin Holm <kevin@...m.dev>
> ---
> I resolved the merge conflict so that, after this patch is applied to the linux-
> 6.10.y branch of the stable git repository, the resulting function
> dm_dp_mst_is_port_support_mode (and also the new function
> dp_get_link_current_set_bw) is identical to the original commit.
>
> I've confirmed that it fixes the regression I reported for my use case.
> ---
> .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 232 +++++++++++-----
> --
> 1 file changed, 147 insertions(+), 85 deletions(-)
>
> diff --git
> a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> index a5e1a93ddaea..e90f9d697511 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> @@ -1595,109 +1595,171 @@ static bool
> is_dsc_common_config_possible(struct dc_stream_state *stream,
> return bw_range->max_target_bpp_x16 && bw_range-
> >min_target_bpp_x16; }
>
> +#if defined(CONFIG_DRM_AMD_DC_FP)
> +static bool dp_get_link_current_set_bw(struct drm_dp_aux *aux, uint32_t
> +*cur_link_bw) {
> + uint32_t total_data_bw_efficiency_x10000 = 0;
> + uint32_t link_rate_per_lane_kbps = 0;
> + enum dc_link_rate link_rate;
> + union lane_count_set lane_count;
> + u8 dp_link_encoding;
> + u8 link_bw_set = 0;
> +
> + *cur_link_bw = 0;
> +
> + if (drm_dp_dpcd_read(aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
> &dp_link_encoding, 1) != 1 ||
> + drm_dp_dpcd_read(aux, DP_LANE_COUNT_SET,
> &lane_count.raw, 1) != 1 ||
> + drm_dp_dpcd_read(aux, DP_LINK_BW_SET, &link_bw_set,
> 1) != 1)
> + return false;
> +
> + switch (dp_link_encoding) {
> + case DP_8b_10b_ENCODING:
> + link_rate = link_bw_set;
> + link_rate_per_lane_kbps = link_rate *
> LINK_RATE_REF_FREQ_IN_KHZ * BITS_PER_DP_BYTE;
> + total_data_bw_efficiency_x10000 =
> DATA_EFFICIENCY_8b_10b_x10000;
> + total_data_bw_efficiency_x10000 /= 100;
> + total_data_bw_efficiency_x10000 *=
> DATA_EFFICIENCY_8b_10b_FEC_EFFICIENCY_x100;
> + break;
> + case DP_128b_132b_ENCODING:
> + switch (link_bw_set) {
> + case DP_LINK_BW_10:
> + link_rate = LINK_RATE_UHBR10;
> + break;
> + case DP_LINK_BW_13_5:
> + link_rate = LINK_RATE_UHBR13_5;
> + break;
> + case DP_LINK_BW_20:
> + link_rate = LINK_RATE_UHBR20;
> + break;
> + default:
> + return false;
> + }
> +
> + link_rate_per_lane_kbps = link_rate * 10000;
> + total_data_bw_efficiency_x10000 =
> DATA_EFFICIENCY_128b_132b_x10000;
> + break;
> + default:
> + return false;
> + }
> +
> + *cur_link_bw = link_rate_per_lane_kbps *
> lane_count.bits.LANE_COUNT_SET / 10000 *
> total_data_bw_efficiency_x10000;
> + return true;
> +}
> +#endif
> +
> enum dc_status dm_dp_mst_is_port_support_mode(
> struct amdgpu_dm_connector *aconnector,
> struct dc_stream_state *stream)
> {
> - int pbn, branch_max_throughput_mps = 0;
> +#if defined(CONFIG_DRM_AMD_DC_FP)
> + int branch_max_throughput_mps = 0;
> struct dc_link_settings cur_link_settings;
> - unsigned int end_to_end_bw_in_kbps = 0;
> - unsigned int upper_link_bw_in_kbps = 0, down_link_bw_in_kbps = 0;
> + uint32_t end_to_end_bw_in_kbps = 0;
> + uint32_t root_link_bw_in_kbps = 0;
> + uint32_t virtual_channel_bw_in_kbps = 0;
> struct dc_dsc_bw_range bw_range = {0};
> struct dc_dsc_config_options dsc_options = {0};
> + uint32_t stream_kbps;
>
> - /*
> - * Consider the case with the depth of the mst topology tree is equal
> or less than 2
> - * A. When dsc bitstream can be transmitted along the entire path
> - * 1. dsc is possible between source and branch/leaf device (common
> dsc params is possible), AND
> - * 2. dsc passthrough supported at MST branch, or
> - * 3. dsc decoding supported at leaf MST device
> - * Use maximum dsc compression as bw constraint
> - * B. When dsc bitstream cannot be transmitted along the entire path
> - * Use native bw as bw constraint
> + /* DSC unnecessary case
> + * Check if timing could be supported within end-to-end BW
> */
> - if (is_dsc_common_config_possible(stream, &bw_range) &&
> - (aconnector->mst_output_port->passthrough_aux ||
> - aconnector->dsc_aux == &aconnector->mst_output_port->aux)) {
> - cur_link_settings = stream->link->verified_link_cap;
> - upper_link_bw_in_kbps =
> dc_link_bandwidth_kbps(aconnector->dc_link, &cur_link_settings);
> - down_link_bw_in_kbps = kbps_from_pbn(aconnector-
> >mst_output_port->full_pbn);
> -
> - /* pick the end to end bw bottleneck */
> - end_to_end_bw_in_kbps = min(upper_link_bw_in_kbps,
> down_link_bw_in_kbps);
> -
> - if (end_to_end_bw_in_kbps < bw_range.min_kbps) {
> - DRM_DEBUG_DRIVER("maximum dsc compression
> cannot fit into end-to-end bandwidth\n");
> + stream_kbps =
> + dc_bandwidth_in_kbps_from_timing(&stream->timing,
> + dc_link_get_highest_encoding_format(stream->link));
> + cur_link_settings = stream->link->verified_link_cap;
> + root_link_bw_in_kbps = dc_link_bandwidth_kbps(aconnector-
> >dc_link, &cur_link_settings);
> + virtual_channel_bw_in_kbps =
> +kbps_from_pbn(aconnector->mst_output_port->full_pbn);
> +
> + /* pick the end to end bw bottleneck */
> + end_to_end_bw_in_kbps = min(root_link_bw_in_kbps,
> +virtual_channel_bw_in_kbps);
> +
> + if (stream_kbps <= end_to_end_bw_in_kbps) {
> + DRM_DEBUG_DRIVER("No DSC needed. End-to-end bw
> sufficient.");
> + return DC_OK;
> + }
> +
> + /*DSC necessary case*/
> + if (!aconnector->dsc_aux)
> + return DC_FAIL_BANDWIDTH_VALIDATE;
> +
> + if (is_dsc_common_config_possible(stream, &bw_range)) {
> +
> + /*capable of dsc passthough. dsc bitstream along the entire
> path*/
> + if (aconnector->mst_output_port->passthrough_aux) {
> + if (bw_range.min_kbps > end_to_end_bw_in_kbps) {
> + DRM_DEBUG_DRIVER("DSC passthrough.
> Max dsc compression can't fit
> +into end-to-end bw\n");
> return DC_FAIL_BANDWIDTH_VALIDATE;
> - }
> + }
> + } else {
> + /*dsc bitstream decoded at the dp last link*/
> + struct drm_dp_mst_port *immediate_upstream_port
> = NULL;
> + uint32_t end_link_bw = 0;
> +
> + /*Get last DP link BW capability*/
> + if (dp_get_link_current_set_bw(&aconnector-
> >mst_output_port->aux, &end_link_bw)) {
> + if (stream_kbps > end_link_bw) {
> + DRM_DEBUG_DRIVER("DSC decode at
> last link. Mode required bw can't fit into available bw\n");
> + return
> DC_FAIL_BANDWIDTH_VALIDATE;
> + }
> + }
>
> - if (end_to_end_bw_in_kbps < bw_range.stream_kbps) {
> - dc_dsc_get_default_config_option(stream->link->dc,
> &dsc_options);
> - dsc_options.max_target_bpp_limit_override_x16 =
> aconnector->base.display_info.max_dsc_bpp * 16;
> - if (dc_dsc_compute_config(stream->sink->ctx->dc-
> >res_pool->dscs[0],
> - &stream->sink-
> >dsc_caps.dsc_dec_caps,
> - &dsc_options,
> - end_to_end_bw_in_kbps,
> - &stream->timing,
> -
> dc_link_get_highest_encoding_format(stream->link),
> - &stream->timing.dsc_cfg)) {
> - stream->timing.flags.DSC = 1;
> - DRM_DEBUG_DRIVER("end-to-end
> bandwidth require dsc and dsc config found\n");
> - } else {
> - DRM_DEBUG_DRIVER("end-to-end
> bandwidth require dsc but dsc config not found\n");
> - return DC_FAIL_BANDWIDTH_VALIDATE;
> + /*Get virtual channel bandwidth between source and
> the link before the last link*/
> + if (aconnector->mst_output_port->parent-
> >port_parent)
> + immediate_upstream_port =
> +aconnector->mst_output_port->parent->port_parent;
> +
> + if (immediate_upstream_port) {
> + virtual_channel_bw_in_kbps =
> kbps_from_pbn(immediate_upstream_port->full_pbn);
> + virtual_channel_bw_in_kbps =
> min(root_link_bw_in_kbps, virtual_channel_bw_in_kbps);
> + if (bw_range.min_kbps >
> virtual_channel_bw_in_kbps) {
> + DRM_DEBUG_DRIVER("DSC decode at
> last link. Max dsc compression can't fit into MST available bw\n");
> + return
> DC_FAIL_BANDWIDTH_VALIDATE;
> + }
> }
> }
> - } else {
> - /* Check if mode could be supported within max slot
> - * number of current mst link and full_pbn of mst links.
> - */
> - int pbn_div, slot_num, max_slot_num;
> - enum dc_link_encoding_format link_encoding;
> - uint32_t stream_kbps =
> - dc_bandwidth_in_kbps_from_timing(&stream-
> >timing,
> -
> dc_link_get_highest_encoding_format(stream->link));
> -
> - pbn = kbps_to_peak_pbn(stream_kbps);
> - pbn_div = dm_mst_get_pbn_divider(stream->link);
> - slot_num = DIV_ROUND_UP(pbn, pbn_div);
> -
> - link_encoding =
> dc_link_get_highest_encoding_format(stream->link);
> - if (link_encoding == DC_LINK_ENCODING_DP_8b_10b)
> - max_slot_num = 63;
> - else if (link_encoding ==
> DC_LINK_ENCODING_DP_128b_132b)
> - max_slot_num = 64;
> - else {
> - DRM_DEBUG_DRIVER("Invalid link encoding
> format\n");
> - return DC_FAIL_BANDWIDTH_VALIDATE;
> - }
>
> - if (slot_num > max_slot_num ||
> - pbn > aconnector->mst_output_port->full_pbn) {
> - DRM_DEBUG_DRIVER("Mode can not be supported
> within mst links!");
> + /*Confirm if we can obtain dsc config*/
> + dc_dsc_get_default_config_option(stream->link->dc,
> &dsc_options);
> + dsc_options.max_target_bpp_limit_override_x16 =
> aconnector->base.display_info.max_dsc_bpp * 16;
> + if (dc_dsc_compute_config(stream->sink->ctx->dc->res_pool-
> >dscs[0],
> + &stream->sink->dsc_caps.dsc_dec_caps,
> + &dsc_options,
> + end_to_end_bw_in_kbps,
> + &stream->timing,
> +
> dc_link_get_highest_encoding_format(stream->link),
> + &stream->timing.dsc_cfg)) {
> + stream->timing.flags.DSC = 1;
> + DRM_DEBUG_DRIVER("Require dsc and dsc config
> found\n");
> + } else {
> + DRM_DEBUG_DRIVER("Require dsc but can't find
> appropriate dsc
> +config\n");
> return DC_FAIL_BANDWIDTH_VALIDATE;
> }
> - }
>
> - /* check is mst dsc output bandwidth
> branch_overall_throughput_0_mps */
> - switch (stream->timing.pixel_encoding) {
> - case PIXEL_ENCODING_RGB:
> - case PIXEL_ENCODING_YCBCR444:
> - branch_max_throughput_mps =
> - aconnector->dc_sink-
> >dsc_caps.dsc_dec_caps.branch_overall_throughput_0_mps;
> - break;
> - case PIXEL_ENCODING_YCBCR422:
> - case PIXEL_ENCODING_YCBCR420:
> - branch_max_throughput_mps =
> - aconnector->dc_sink-
> >dsc_caps.dsc_dec_caps.branch_overall_throughput_1_mps;
> - break;
> - default:
> - break;
> - }
> + /* check is mst dsc output bandwidth
> branch_overall_throughput_0_mps */
> + switch (stream->timing.pixel_encoding) {
> + case PIXEL_ENCODING_RGB:
> + case PIXEL_ENCODING_YCBCR444:
> + branch_max_throughput_mps =
> + aconnector->dc_sink-
> >dsc_caps.dsc_dec_caps.branch_overall_throughput_0_mps;
> + break;
> + case PIXEL_ENCODING_YCBCR422:
> + case PIXEL_ENCODING_YCBCR420:
> + branch_max_throughput_mps =
> + aconnector->dc_sink-
> >dsc_caps.dsc_dec_caps.branch_overall_throughput_1_mps;
> + break;
> + default:
> + break;
> + }
>
> - if (branch_max_throughput_mps != 0 &&
> - ((stream->timing.pix_clk_100hz / 10) >
> branch_max_throughput_mps * 1000))
> + if (branch_max_throughput_mps != 0 &&
> + ((stream->timing.pix_clk_100hz / 10) >
> branch_max_throughput_mps * 1000)) {
> + DRM_DEBUG_DRIVER("DSC is required but max
> throughput mps fails");
> return DC_FAIL_BANDWIDTH_VALIDATE;
> -
> + }
> + } else {
> + DRM_DEBUG_DRIVER("DSC is required but can't find common
> dsc config.");
> + return DC_FAIL_BANDWIDTH_VALIDATE;
> + }
> +#endif
> return DC_OK;
> }
> --
> 2.45.2
Powered by blists - more mailing lists