| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240731-pci-qcom-hotplug-v3-12-a1426afdee3b@linaro.org>
Date: Wed, 31 Jul 2024 16:20:15 +0530
From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@...nel.org>
To: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-pci@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v3 12/13] PCI: qcom: Enumerate endpoints based on Link up
event in 'global_irq' interrupt
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Historically, Qcom PCIe RC controllers lacked standard hotplug support. So
when an endpoint is attached to the SoC, users have to rescan the bus
manually to enumerate the device. But this can be avoided by using the Link
up event exposed by the Qcom specific 'global_irq' interrupt.
Qcom PCIe RC controllers are capable of generating the 'global' SPI
interrupt to the host CPUs. The device driver can use this interrupt to
identify events such as PCIe link specific events, safety events etc...
One such event is the PCIe Link up event generated when an endpoint is
detected on the bus and the Link is 'up'. This event can be used to
enumerate the PCIe endpoint devices without user intervention.
So add support for capturing the PCIe Link up event using the 'global'
interrupt in the driver. Once the Link up event is received, the bus
underneath the host bridge is scanned to enumerate PCIe endpoint devices.
All of the Qcom SoCs have only one rootport per controller instance. So
only a single 'Link up' event is generated for the PCIe controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 55 +++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0180edf3310e..a1d678fe7fa5 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -50,6 +50,9 @@
#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
#define PARF_Q2A_FLUSH 0x1ac
#define PARF_LTSSM 0x1b0
+#define PARF_INT_ALL_STATUS 0x224
+#define PARF_INT_ALL_CLEAR 0x228
+#define PARF_INT_ALL_MASK 0x22c
#define PARF_SID_OFFSET 0x234
#define PARF_BDF_TRANSLATE_CFG 0x24c
#define PARF_SLV_ADDR_SPACE_SIZE 0x358
@@ -121,6 +124,9 @@
/* PARF_LTSSM register fields */
#define LTSSM_EN BIT(8)
+/* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
+#define PARF_INT_ALL_LINK_UP BIT(13)
+
/* PARF_NO_SNOOP_OVERIDE register fields */
#define WR_NO_SNOOP_OVERIDE_EN BIT(1)
#define RD_NO_SNOOP_OVERIDE_EN BIT(3)
@@ -1488,6 +1494,29 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
qcom_pcie_link_transition_count);
}
+static irqreturn_t qcom_pcie_global_irq_thread(int irq, void *data)
+{
+ struct qcom_pcie *pcie = data;
+ struct dw_pcie_rp *pp = &pcie->pci->pp;
+ struct device *dev = pcie->pci->dev;
+ u32 status = readl_relaxed(pcie->parf + PARF_INT_ALL_STATUS);
+
+ writel_relaxed(status, pcie->parf + PARF_INT_ALL_CLEAR);
+
+ if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
+ dev_dbg(dev, "Received Link up event. Starting enumeration!\n");
+ /* Rescan the bus to enumerate endpoint devices */
+ pci_lock_rescan_remove();
+ pci_rescan_bus(pp->bridge->bus);
+ pci_unlock_rescan_remove();
+ } else {
+ dev_WARN_ONCE(dev, 1, "Received unknown event. INT_STATUS: 0x%08x\n",
+ status);
+ }
+
+ return IRQ_HANDLED;
+}
+
static int qcom_pcie_probe(struct platform_device *pdev)
{
const struct qcom_pcie_cfg *pcie_cfg;
@@ -1498,7 +1527,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
struct dw_pcie_rp *pp;
struct resource *res;
struct dw_pcie *pci;
- int ret;
+ int ret, irq;
+ char *name;
pcie_cfg = of_device_get_match_data(dev);
if (!pcie_cfg || !pcie_cfg->ops) {
@@ -1617,6 +1647,27 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_phy_exit;
}
+ name = devm_kasprintf(dev, GFP_KERNEL, "qcom_pcie_global_irq%d",
+ pci_domain_nr(pp->bridge->bus));
+ if (!name) {
+ ret = -ENOMEM;
+ goto err_host_deinit;
+ }
+
+ irq = platform_get_irq_byname_optional(pdev, "global");
+ if (irq > 0) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ qcom_pcie_global_irq_thread,
+ IRQF_ONESHOT, name, pcie);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret,
+ "Failed to request Global IRQ\n");
+ goto err_host_deinit;
+ }
+
+ writel_relaxed(PARF_INT_ALL_LINK_UP, pcie->parf + PARF_INT_ALL_MASK);
+ }
+
qcom_pcie_icc_opp_update(pcie);
if (pcie->mhi)
@@ -1624,6 +1675,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
return 0;
+err_host_deinit:
+ dw_pcie_host_deinit(pp);
err_phy_exit:
phy_exit(pcie->phy);
err_pm_runtime_put:
--
2.25.1
Powered by blists - more mailing lists