linux-kernel - Re: [PATCH] phy: qcom: qmp: Add debug prints for register writes

Open Source and information security mailing list archives

Message-ID: <knjl4q5zyqz3wrqp5aawgpxk6aqggvteb72enpsgweulgrxmnu@ol42qtug4xvi>
Date: Wed, 31 Jul 2024 15:18:31 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
	kishon@...nel.org, linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] phy: qcom: qmp: Add debug prints for register writes

On Wed, Jul 31, 2024 at 04:28:46PM GMT, Vinod Koul wrote:
> On 30-07-24, 15:33, Manivannan Sadhasivam wrote:
> > These register prints are useful to validate the init sequence against the
> > Qcom internal documentation and also to share with the Qcom hw engineers to
> > debug issues related to PHY.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > ---
> >  drivers/phy/qualcomm/phy-qcom-qmp-common.h | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-common.h b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > index 799384210509..e6a6bcfcac28 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > @@ -9,6 +9,7 @@
> >  struct qmp_phy_init_tbl {
> >  	unsigned int offset;
> >  	unsigned int val;
> > +	char *name;
> >  	/*
> >  	 * mask of lanes for which this register is written
> >  	 * for cases when second lane needs different values
> > @@ -20,6 +21,7 @@ struct qmp_phy_init_tbl {
> >  	{				\
> >  		.offset = o,		\
> >  		.val = v,		\
> > +		.name = #o,		\
> >  		.lane_mask = 0xff,	\
> >  	}
> >  
> > @@ -27,6 +29,7 @@ struct qmp_phy_init_tbl {
> >  	{				\
> >  		.offset = o,		\
> >  		.val = v,		\
> > +		.name = #o,		\
> >  		.lane_mask = l,		\
> >  	}
> >  
> > @@ -45,6 +48,7 @@ static inline void qmp_configure_lane(void __iomem *base,
> >  		if (!(t->lane_mask & lane_mask))
> >  			continue;
> >  
> > +		pr_debug("QMP PHY: Writing: %s --> 0x%02x\n", t->name, t->val);
> 
> This lgtm, but fails to help when offset _might_ be incorrect, including
> the offset value as well (not just the name) would be better imo... 

Can we please use dev_vdbg instead? Having dev_ part makes sure that we
can not mismatch PHYs and the sequences. _vdbg is less important, but
I don't think we want this in the log messages unless absolutely
required.

Also, could you possibly apply this to all other QMP drivers?

> 
> >  		writel(t->val, base + t->offset);
> >  	}
> >  }
> > -- 
> > 2.25.1
> 
> -- 
> ~Vinod
> 
> -- 
> linux-phy mailing list
> linux-phy@...ts.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
With best wishes
Dmitry

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives