[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240801172308.GA109178@bhelgaas>
Date: Thu, 1 Aug 2024 12:23:08 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: manivannan.sadhasivam@...aro.org
Cc: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-pci@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: Re: [PATCH v3 06/13] PCI: qcom-ep: Modify 'global_irq' and
'perst_irq' IRQ device names
On Wed, Jul 31, 2024 at 04:20:09PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>
> Currently, the IRQ device name for both of these IRQs doesn't have Qcom
> specific prefix and PCIe domain number. This causes 2 issues:
>
> 1. Pollutes the global IRQ namespace since 'global' is a common name.
> 2. When more than one EP controller instance is present in the SoC, naming
> conflict will occur.
>
> Hence, add 'qcom_pcie_ep_' prefix and PCIe domain number suffix to the IRQ
> names to uniquely identify the IRQs and also to fix the above mentioned
> issues.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom-ep.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 0bb0a056dd8f..d0a27fa6fdc8 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -711,8 +711,15 @@ static irqreturn_t qcom_pcie_ep_perst_irq_thread(int irq, void *data)
> static int qcom_pcie_ep_enable_irq_resources(struct platform_device *pdev,
> struct qcom_pcie_ep *pcie_ep)
> {
> + struct device *dev = pcie_ep->pci.dev;
> + char *name;
> int ret;
>
> + name = devm_kasprintf(dev, GFP_KERNEL, "qcom_pcie_ep_global_irq%d",
> + pcie_ep->pci.ep.epc->domain_nr);
> + if (!name)
> + return -ENOMEM;
I assume this is what shows up in /proc/interrupts? I always wonder
why it doesn't include dev_name(). A few drivers do that, but
apparently it's not universally desirable. It's sort of annoying
that, e.g., we get a bunch of "aerdrv" interrupts with no clue which
device they relate to.
> pcie_ep->global_irq = platform_get_irq_byname(pdev, "global");
> if (pcie_ep->global_irq < 0)
> return pcie_ep->global_irq;
> @@ -720,18 +727,23 @@ static int qcom_pcie_ep_enable_irq_resources(struct platform_device *pdev,
> ret = devm_request_threaded_irq(&pdev->dev, pcie_ep->global_irq, NULL,
> qcom_pcie_ep_global_irq_thread,
> IRQF_ONESHOT,
> - "global_irq", pcie_ep);
> + name, pcie_ep);
> if (ret) {
> dev_err(&pdev->dev, "Failed to request Global IRQ\n");
> return ret;
> }
>
> + name = devm_kasprintf(dev, GFP_KERNEL, "qcom_pcie_ep_perst_irq%d",
> + pcie_ep->pci.ep.epc->domain_nr);
> + if (!name)
> + return -ENOMEM;
> +
> pcie_ep->perst_irq = gpiod_to_irq(pcie_ep->reset);
> irq_set_status_flags(pcie_ep->perst_irq, IRQ_NOAUTOEN);
> ret = devm_request_threaded_irq(&pdev->dev, pcie_ep->perst_irq, NULL,
> qcom_pcie_ep_perst_irq_thread,
> IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - "perst_irq", pcie_ep);
> + name, pcie_ep);
> if (ret) {
> dev_err(&pdev->dev, "Failed to request PERST IRQ\n");
> disable_irq(pcie_ep->global_irq);
>
> --
> 2.25.1
>
>
Powered by blists - more mailing lists