lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240802080403.739509-1-paweldembicki@gmail.com>
Date: Fri,  2 Aug 2024 10:03:57 +0200
From: Pawel Dembicki <paweldembicki@...il.com>
To: netdev@...r.kernel.org
Cc: Pawel Dembicki <paweldembicki@...il.com>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Linus Walleij <linus.walleij@...aro.org>,
	linux-kernel@...r.kernel.org
Subject: [PATCH net 0/6] net: dsa: vsc73xx: fix MDIO bus access and PHY operations

This series are extracted patches from net-next series [0].

The VSC73xx driver has issues with PHY configuration. This patch series
fixes most of them.

The first patch synchronizes the register configuration routine with the
datasheet recommendations.

Patches 2-4 restore proper communication on the MDIO bus. Currently,
the write value isn't sent to the MDIO register, and without a busy check,
communication with the PHY can be interrupted. This causes the PHY to
receive improper configuration and autonegotiation could fail.

The fifth patch removes the PHY reset blockade, as it is no longer
required.

After fixing the MDIO operations, autonegotiation became possible.
The last patch removes the blockade, which became unnecessary after
the MDIO operations fix. It also enables the MDI-X feature, which is
disabled by default in forced 100BASE-TX mode like other Vitesse PHYs.

[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both

Pawel Dembicki (6):
  net: dsa: vsc73xx: fix port MAC configuration in full duplex mode
  net: dsa: vsc73xx: pass value in phy_write operation
  net: dsa: vsc73xx: use defined values in phy operations
  net: dsa: vsc73xx: check busy flag in MDIO operations
  net: dsa: vsc73xx: allow phy resetting
  net: phy: vitesse: repair vsc73xx autonegotiation

 drivers/net/dsa/vitesse-vsc73xx-core.c | 93 +++++++++++++++++++-------
 drivers/net/phy/vitesse.c              | 25 +++++--
 2 files changed, 89 insertions(+), 29 deletions(-)

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ