[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240802152109.137243-9-afd@ti.com>
Date: Fri, 2 Aug 2024 10:21:08 -0500
From: Andrew Davis <afd@...com>
To: Bjorn Andersson <andersson@...nel.org>,
Mathieu Poirier
<mathieu.poirier@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof
Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Nishanth
Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo
<kristo@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Hari Nagalla
<hnagalla@...com>
CC: <linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
Andrew Davis <afd@...com>
Subject: [PATCH v11 8/9] arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node
From: Hari Nagalla <hnagalla@...com>
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Hari Nagalla <hnagalla@...com>
Signed-off-by: Andrew Davis <afd@...com>
---
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 6bb1ad2e56ec2..23915641115b1 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -101,6 +101,18 @@ main_r5fss1_core1_memory_region: r5f-memory@...00000 {
no-map;
};
+ mcu_m4fss_dma_memory_region: m4f-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: m4f-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
rtos_ipc_memory_region: ipc-memories@...00000 {
reg = <0x00 0xa5000000 0x00 0x00800000>;
alignment = <0x1000>;
@@ -769,6 +781,13 @@ &main_r5fss1_core1 {
<&main_r5fss1_core1_memory_region>;
};
+&mcu_m4fss {
+ mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ status = "okay";
+};
+
&serdes_ln_ctrl {
idle-states = <AM64_SERDES0_LANE0_PCIE0>;
};
--
2.39.2
Powered by blists - more mailing lists