| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240802155440.652239904@linutronix.de>
Date: Fri, 2 Aug 2024 18:15:42 +0200 (CEST)
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org
Subject: [patch 07/15] x86/ioapic: Cleanup apic_printk()s
Replace apic_printk($LEVEL) with the corresponding apic_pr_*() helpers and
use pr_info() for APIC_QUIET as that is always printed so the indirection
is pointless noise.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
arch/x86/kernel/apic/io_apic.c | 176 +++++++++++++++++------------------------
1 file changed, 73 insertions(+), 103 deletions(-)
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -201,10 +201,9 @@ void mp_save_irq(struct mpc_intsrc *m)
{
int i;
- apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
- m->srcbusirq, m->dstapic, m->dstirq);
+ apic_pr_verbose("Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
+ m->srcbusirq, m->dstapic, m->dstirq);
for (i = 0; i < mp_irq_entries; i++) {
if (!memcmp(&mp_irqs[i], m, sizeof(*m)))
@@ -554,28 +553,23 @@ static int pirq_entries[MAX_PIRQS] = {
static int __init ioapic_pirq_setup(char *str)
{
- int i, max;
- int ints[MAX_PIRQS+1];
+ int i, max, ints[MAX_PIRQS+1];
get_options(str, ARRAY_SIZE(ints), ints);
- apic_printk(APIC_VERBOSE, KERN_INFO
- "PIRQ redirection, working around broken MP-BIOS.\n");
+ apic_pr_verbose("PIRQ redirection, working around broken MP-BIOS.\n");
+
max = MAX_PIRQS;
if (ints[0] < MAX_PIRQS)
max = ints[0];
for (i = 0; i < max; i++) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
- /*
- * PIRQs are mapped upside down, usually.
- */
+ apic_pr_verbose("... PIRQ%d -> IRQ %d\n", i, ints[i + 1]);
+ /* PIRQs are mapped upside down, usually */
pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
}
return 1;
}
-
__setup("pirq=", ioapic_pirq_setup);
#endif /* CONFIG_X86_32 */
@@ -737,8 +731,7 @@ static bool EISA_ELCR(unsigned int irq)
unsigned int port = PIC_ELCR1 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
- apic_printk(APIC_VERBOSE, KERN_INFO
- "Broken MPtable reports ISA irq %d\n", irq);
+ apic_pr_verbose("Broken MPtable reports ISA irq %d\n", irq);
return false;
}
@@ -1052,15 +1045,13 @@ static int pin_2_irq(int idx, int ioapic
* PCI IRQ command line redirection. Yes, limits are hardcoded.
*/
if ((pin >= 16) && (pin <= 23)) {
- if (pirq_entries[pin-16] != -1) {
- if (!pirq_entries[pin-16]) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "disabling PIRQ%d\n", pin-16);
+ if (pirq_entries[pin - 16] != -1) {
+ if (!pirq_entries[pin - 16]) {
+ apic_pr_verbose("Disabling PIRQ%d\n", pin - 16);
} else {
int irq = pirq_entries[pin-16];
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "using PIRQ%d -> IRQ %d\n",
- pin-16, irq);
+
+ apic_pr_verbose("Using PIRQ%d -> IRQ %d\n", pin - 16, irq);
return irq;
}
}
@@ -1111,12 +1102,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
{
int irq, i, best_ioapic = -1, best_idx = -1;
- apic_printk(APIC_DEBUG,
- "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
+ apic_pr_debug("Querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE,
- "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ apic_pr_verbose("PCI BIOS passed nonexistent PCI bus %d!\n", bus);
return -1;
}
@@ -1173,17 +1162,16 @@ static void __init setup_IO_APIC_irqs(vo
unsigned int ioapic, pin;
int idx;
- apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+ apic_pr_verbose("Init IO_APIC IRQs\n");
for_each_ioapic_pin(ioapic, pin) {
idx = find_irq_entry(ioapic, pin, mp_INT);
- if (idx < 0)
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " apic %d pin %d not connected\n",
- mpc_ioapic_id(ioapic), pin);
- else
- pin_2_irq(idx, ioapic, pin,
- ioapic ? 0 : IOAPIC_MAP_ALLOC);
+ if (idx < 0) {
+ apic_pr_verbose("apic %d pin %d not connected\n",
+ mpc_ioapic_id(ioapic), pin);
+ } else {
+ pin_2_irq(idx, ioapic, pin, ioapic ? 0 : IOAPIC_MAP_ALLOC);
+ }
}
}
@@ -1359,29 +1347,24 @@ void __init enable_IO_APIC(void)
i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
/* Trust the MP table if nothing is setup in the hardware */
if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
- printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+ pr_warn("ExtINT not setup in hardware but reported by MP table\n");
ioapic_i8259.pin = i8259_pin;
ioapic_i8259.apic = i8259_apic;
}
/* Complain if the MP table and the hardware disagree */
if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
- (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
- {
- printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
- }
+ (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+ pr_warn("ExtINT in hardware and MP table differ\n");
- /*
- * Do not trust the IO-APIC being empty at bootup
- */
+ /* Do not trust the IO-APIC being empty at bootup */
clear_IO_APIC();
}
void native_restore_boot_irq_mode(void)
{
/*
- * If the i8259 is routed through an IOAPIC
- * Put that IOAPIC in virtual wire mode
- * so legacy interrupts can be delivered.
+ * If the i8259 is routed through an IOAPIC Put that IOAPIC in
+ * virtual wire mode so legacy interrupts can be delivered.
*/
if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
@@ -1469,8 +1452,8 @@ static void __init setup_ioapic_ids_from
set_bit(i, phys_id_present_map);
ioapics[ioapic_idx].mp_config.apicid = i;
} else {
- apic_printk(APIC_VERBOSE, "Setting %d in the phys_id_present_map\n",
- mpc_ioapic_id(ioapic_idx));
+ apic_pr_verbose("Setting %d in the phys_id_present_map\n",
+ mpc_ioapic_id(ioapic_idx));
set_bit(mpc_ioapic_id(ioapic_idx), phys_id_present_map);
}
@@ -1491,9 +1474,8 @@ static void __init setup_ioapic_ids_from
if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID)
continue;
- apic_printk(APIC_VERBOSE, KERN_INFO
- "...changing IO-APIC physical APIC ID to %d ...",
- mpc_ioapic_id(ioapic_idx));
+ apic_pr_verbose("...changing IO-APIC physical APIC ID to %d ...",
+ mpc_ioapic_id(ioapic_idx));
reg_00.bits.ID = mpc_ioapic_id(ioapic_idx);
scoped_guard (raw_spinlock_irqsave, &ioapic_lock) {
@@ -1504,7 +1486,7 @@ static void __init setup_ioapic_ids_from
if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx))
pr_cont("could not set ID!\n");
else
- apic_printk(APIC_VERBOSE, " ok.\n");
+ apic_pr_verbose(" ok.\n");
}
}
@@ -2136,9 +2118,8 @@ static inline void __init check_timer(vo
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
- "apic1=%d pin1=%d apic2=%d pin2=%d\n",
- cfg->vector, apic1, pin1, apic2, pin2);
+ pr_info("..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ cfg->vector, apic1, pin1, apic2, pin2);
/*
* Some BIOS writers are clueless and report the ExtINTA
@@ -2182,13 +2163,10 @@ static inline void __init check_timer(vo
panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC");
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
- apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
- "8254 timer not connected to IO-APIC\n");
+ pr_err("..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
- apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
- "(IRQ0) through the 8259A ...\n");
- apic_printk(APIC_QUIET, KERN_INFO
- "..... (found apic %d pin %d) ...\n", apic2, pin2);
+ pr_info("...trying to set up timer (IRQ0) through the 8259A ...\n");
+ pr_info("..... (found apic %d pin %d) ...\n", apic2, pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
@@ -2197,7 +2175,7 @@ static inline void __init check_timer(vo
irq_domain_activate_irq(irq_data, false);
legacy_pic->unmask(0);
if (timer_irq_works()) {
- apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
+ pr_info("....... works.\n");
goto out;
}
/*
@@ -2205,26 +2183,24 @@ static inline void __init check_timer(vo
*/
legacy_pic->mask(0);
clear_IO_APIC_pin(apic2, pin2);
- apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
+ pr_info("....... failed.\n");
}
- apic_printk(APIC_QUIET, KERN_INFO
- "...trying to set up timer as Virtual Wire IRQ...\n");
+ pr_info("...trying to set up timer as Virtual Wire IRQ...\n");
lapic_register_intr(0);
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
legacy_pic->unmask(0);
if (timer_irq_works()) {
- apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+ pr_info("..... works.\n");
goto out;
}
legacy_pic->mask(0);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
- apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
+ pr_info("..... failed.\n");
- apic_printk(APIC_QUIET, KERN_INFO
- "...trying to set up timer as ExtINT IRQ...\n");
+ pr_info("...trying to set up timer as ExtINT IRQ...\n");
legacy_pic->init(0);
legacy_pic->make_irq(0);
@@ -2234,14 +2210,15 @@ static inline void __init check_timer(vo
unlock_ExtINT_logic();
if (timer_irq_works()) {
- apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+ pr_info("..... works.\n");
goto out;
}
- apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
- if (apic_is_x2apic_enabled())
- apic_printk(APIC_QUIET, KERN_INFO
- "Perhaps problem with the pre-enabled x2apic mode\n"
- "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
+
+ pr_info("..... failed :\n");
+ if (apic_is_x2apic_enabled()) {
+ pr_info("Perhaps problem with the pre-enabled x2apic mode\n"
+ "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
+ }
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
"report. Then try booting with the 'noapic' option.\n");
out:
@@ -2339,7 +2316,7 @@ void __init setup_IO_APIC(void)
io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL;
- apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
+ apic_pr_verbose("ENABLING IO-APIC IRQs\n");
for_each_ioapic(ioapic)
BUG_ON(mp_irqdomain_create(ioapic));
@@ -2478,7 +2455,7 @@ static int io_apic_get_unique_id(int ioa
}
}
- apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+ apic_pr_verbose("IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
return apic_id;
}
@@ -2514,8 +2491,8 @@ static u8 io_apic_unique_id(int idx, u8
new_id = reg_00.bits.ID;
if (!test_bit(new_id, used)) {
- apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Using reg apic_id %d instead of %d\n",
- idx, new_id, id);
+ apic_pr_verbose("IOAPIC[%d]: Using reg apic_id %d instead of %d\n",
+ idx, new_id, id);
return new_id;
}
@@ -2614,9 +2591,7 @@ void __init io_apic_init_mappings(void)
ioapic_phys = mpc_ioapic_addr(i);
#ifdef CONFIG_X86_32
if (!ioapic_phys) {
- printk(KERN_ERR
- "WARNING: bogus zero IO-APIC "
- "address found in MPTABLE, "
+ pr_err("WARNING: bogus zero IO-APIC address found in MPTABLE, "
"disabling IO/APIC support!\n");
smp_found_config = 0;
ioapic_is_disabled = true;
@@ -2635,9 +2610,8 @@ void __init io_apic_init_mappings(void)
ioapic_phys = __pa(ioapic_phys);
}
io_apic_set_fixmap(idx, ioapic_phys);
- apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n",
- __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK),
- ioapic_phys);
+ apic_pr_verbose("mapped IOAPIC to %08lx (%08lx)\n",
+ __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys);
idx++;
ioapic_res->start = ioapic_phys;
@@ -2648,13 +2622,12 @@ void __init io_apic_init_mappings(void)
void __init ioapic_insert_resources(void)
{
- int i;
struct resource *r = ioapic_resources;
+ int i;
if (!r) {
if (nr_ioapics > 0)
- printk(KERN_ERR
- "IO APIC resources couldn't be allocated.\n");
+ pr_err("IO APIC resources couldn't be allocated.\n");
return;
}
@@ -2674,11 +2647,12 @@ int mp_find_ioapic(u32 gsi)
/* Find the IOAPIC that manages this GSI. */
for_each_ioapic(i) {
struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i);
+
if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end)
return i;
}
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ pr_err("ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
return -1;
}
@@ -2745,12 +2719,13 @@ int mp_register_ioapic(int id, u32 addre
pr_warn("Bogus (zero) I/O APIC address found, skipping!\n");
return -EINVAL;
}
- for_each_ioapic(ioapic)
+
+ for_each_ioapic(ioapic) {
if (ioapics[ioapic].mp_config.apicaddr == address) {
- pr_warn("address 0x%x conflicts with IOAPIC%d\n",
- address, ioapic);
+ pr_warn("address 0x%x conflicts with IOAPIC%d\n", address, ioapic);
return -EEXIST;
}
+ }
idx = find_free_ioapic_entry();
if (idx >= MAX_IO_APICS) {
@@ -2785,8 +2760,7 @@ int mp_register_ioapic(int id, u32 addre
(gsi_end >= gsi_cfg->gsi_base &&
gsi_end <= gsi_cfg->gsi_end)) {
pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n",
- gsi_base, gsi_end,
- gsi_cfg->gsi_base, gsi_cfg->gsi_end);
+ gsi_base, gsi_end, gsi_cfg->gsi_base, gsi_cfg->gsi_end);
clear_fixmap(FIX_IO_APIC_BASE_0 + idx);
return -ENOSPC;
}
@@ -2820,8 +2794,7 @@ int mp_register_ioapic(int id, u32 addre
ioapics[idx].nr_registers = entries;
pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n",
- idx, mpc_ioapic_id(idx),
- mpc_ioapic_ver(idx), mpc_ioapic_addr(idx),
+ idx, mpc_ioapic_id(idx), mpc_ioapic_ver(idx), mpc_ioapic_addr(idx),
gsi_cfg->gsi_base, gsi_cfg->gsi_end);
return 0;
@@ -2850,8 +2823,7 @@ int mp_unregister_ioapic(u32 gsi_base)
if (irq >= 0) {
data = irq_get_chip_data(irq);
if (data && data->count) {
- pr_warn("pin%d on IOAPIC%d is still in use.\n",
- pin, ioapic);
+ pr_warn("pin%d on IOAPIC%d is still in use.\n", pin, ioapic);
return -EBUSY;
}
}
@@ -2968,10 +2940,8 @@ int mp_irqdomain_alloc(struct irq_domain
legacy_pic->mask(virq);
local_irq_restore(flags);
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "IOAPIC[%d]: Preconfigured routing entry (%d-%d -> IRQ %d Level:%i ActiveLow:%i)\n",
- ioapic, mpc_ioapic_id(ioapic), pin, virq,
- data->is_level, data->active_low);
+ apic_pr_verbose("IOAPIC[%d]: Preconfigured routing entry (%d-%d -> IRQ %d Level:%i ActiveLow:%i)\n",
+ ioapic, mpc_ioapic_id(ioapic), pin, virq, data->is_level, data->active_low);
return 0;
free_irqs:
Powered by blists - more mailing lists