| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJM55Z-_sOvRnaa8BuGcupsUksaK=tuTbTmF=AtzmzkCo7y5jA@mail.gmail.com>
Date: Tue, 6 Aug 2024 04:58:17 -0500
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Xingyu Wu <xingyu.wu@...rfivetech.com>, Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Conor Dooley <conor@...nel.org>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>
Cc: Hal Feng <hal.feng@...rfivetech.com>, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH v6] clk: starfive: jh7110-sys: Fix lower rate of CPUfreq
by setting PLL0 rate to 1.5GHz
Xingyu Wu wrote:
> CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz. But now
> PLL0 rate is 1GHz and the cpu frequency loads become 250/333/500/1000MHz
> in fact. The PLL0 rate should be default set to 1.5GHz and set the
> divider of cpu_core clock to 2 in safe.
>
> To keeo the cpu frequency stable when setting PLL0, the parent clock of
> the cpu_root clock needs to be switched from PLL0 to another parent
> clock and add notifier function to do this for PLL0 clock. In the
> function, the cpu_root clock should be operated by saving its current
> parent and setting a new safe parent (osc clock) before setting the PLL0
> clock rate. After setting PLL0 rate, it should be switched back to the
> original parent clock.
>
> To keep the DTS same in Linux and U-Boot and the PLL0 rate is 1GHz in
> U-Boot, the PLL0 rate should be set to 1.5GHz in the driver instead of
> DTS.
>
> Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
> Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
> ---
>
> Hi Stephen and Emil,
>
> This patch is to fix the lower rate of CPUfreq by adding the notifier
> for PLL0 clock and changing the PLL0 rate to 1.5GHz.
>
> To keep the DTS same in Linux and U-Boot as Conor wants[1] and the PLL0
> rate is 1GHz in U-Boot, the PLL0 rate should be set to 1.5GHz in the
> driver instead of DTS.
>
> [1]: https://lore.kernel.org/all/20240515-reorder-even-8b9eebd91b45@spud/
>
> Thanks,
> Xingyu Wu
>
> ---
> .../clk/starfive/clk-starfive-jh7110-sys.c | 54 ++++++++++++++++++-
> drivers/clk/starfive/clk-starfive-jh71x0.h | 2 +
> 2 files changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> index 8f5e5abfa178..7469981fb405 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> @@ -385,6 +385,32 @@ int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
> }
> EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);
>
> +/*
> + * This clock notifier is called when the rate of PLL0 clock is to be changed.
> + * The cpu_root clock should save the curent parent clock and swicth its parent
> + * clock to osc before PLL0 rate will be changed. Then swicth its parent clock
> + * back after the PLL0 rate is completed.
> + */
> +static int jh7110_pll0_clk_notifier_cb(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct jh71x0_clk_priv *priv = container_of(nb, struct jh71x0_clk_priv, pll_clk_nb);
> + struct clk *cpu_root = priv->reg[JH7110_SYSCLK_CPU_ROOT].hw.clk;
> + int ret = 0;
> +
> + if (action == PRE_RATE_CHANGE) {
> + struct clk *osc = clk_get(priv->dev, "osc");
> +
> + priv->original_clk = clk_get_parent(cpu_root);
> + ret = clk_set_parent(cpu_root, osc);
> + clk_put(osc);
> + } else if (action == POST_RATE_CHANGE) {
> + ret = clk_set_parent(cpu_root, priv->original_clk);
> + }
> +
> + return notifier_from_errno(ret);
> +}
> +
> static int __init jh7110_syscrg_probe(struct platform_device *pdev)
> {
> struct jh71x0_clk_priv *priv;
> @@ -413,7 +439,11 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
> if (IS_ERR(priv->pll[0]))
> return PTR_ERR(priv->pll[0]);
> } else {
> - clk_put(pllclk);
> + priv->pll_clk_nb.notifier_call = jh7110_pll0_clk_notifier_cb;
> + ret = clk_notifier_register(pllclk, &priv->pll_clk_nb);
> + if (ret)
> + return ret;
> +
> priv->pll[0] = NULL;
> }
>
> @@ -501,7 +531,27 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - return jh7110_reset_controller_register(priv, "rst-sys", 0);
> + ret = jh7110_reset_controller_register(priv, "rst-sys", 0);
> + if (ret)
> + return ret;
> +
> + /* Set the divider cpu_core to 2 and set the PLL0 rate to 1.5G. */
> + pllclk = clk_get(priv->dev, "pll0_out");
> + if (!IS_ERR(pllclk)) {
> + struct clk *cpu_core = priv->reg[JH7110_SYSCLK_CPU_CORE].hw.clk;
> +
> + ret = clk_set_rate(cpu_core, clk_get_rate(cpu_core) / 2);
> + if (ret)
> + return ret;
> +
> + ret = clk_set_rate(pllclk, 1500000000);
> + if (ret)
> + return ret;
> +
> + clk_put(pllclk);
> + }
> +
> + return 0;
I'm still not a fan of hardcoding cpu frequencies in the driver. You've added
the notifiers exactly so that we can use the standard device tree settings for
this.
In other words I much prefer v5 of this patchset.
/Emil
> }
>
> static const struct of_device_id jh7110_syscrg_match[] = {
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
> index 23e052fc1549..e3f441393e48 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.h
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
> @@ -114,6 +114,8 @@ struct jh71x0_clk_priv {
> spinlock_t rmw_lock;
> struct device *dev;
> void __iomem *base;
> + struct clk *original_clk;
> + struct notifier_block pll_clk_nb;
> struct clk_hw *pll[3];
> struct jh71x0_clk reg[];
> };
> --
> 2.34.1
>
Powered by blists - more mailing lists