[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <hedfv2cny4wk4izuhvkur56xnrmclakxedfr5yzo5vl34ac35i@siwozxxr4u7a>
Date: Tue, 6 Aug 2024 13:02:20 +0000
From: Daniel Gomez <da.gomez@...sung.com>
To: Jia He <justin.he@....com>
CC: Herbert Xu <herbert@...dor.apana.org.au>, Andy Polyakov
<appro@...ptogams.org>, "David S. Miller" <davem@...emloft.net>, "Catalin
Marinas" <catalin.marinas@....com>, Will Deacon <will@...nel.org>,
"linux-crypto@...r.kernel.org" <linux-crypto@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] crypto: arm64/poly1305 - move data to rodata section
On Tue, Aug 06, 2024 at 02:55:45PM GMT, Daniel Gomez wrote:
> On Tue, Aug 06, 2024 at 05:54:44AM GMT, Jia He wrote:
>
> Hi Jia,
>
> > When objtool gains support for ARM in the future, it may encounter issues
> > disassembling the following data in the .text section:
> > > .Lzeros:
> > > .long 0,0,0,0,0,0,0,0
> > > .asciz "Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
> > > .align 2
> >
> > Move it to .rodata which is a more appropriate section for read-only data.
> >
> > There is a limit on how far the label can be from the instruction, hence
> > use "adrp" and low 12bits offset of the label to avoid the compilation
> > error.
> >
> > Signed-off-by: Jia He <justin.he@....com>
> > ---
> > v2:
> > - use adrp+offset to avoid compilation error(kernel test bot and Andy)
> > v1: https://lkml.org/lkml/2024/8/2/616
> >
> > arch/arm64/crypto/poly1305-armv8.pl | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/crypto/poly1305-armv8.pl b/arch/arm64/crypto/poly1305-armv8.pl
> > index cbc980fb02e3..22c9069c0650 100644
> > --- a/arch/arm64/crypto/poly1305-armv8.pl
> > +++ b/arch/arm64/crypto/poly1305-armv8.pl
> > @@ -473,7 +473,8 @@ poly1305_blocks_neon:
> > subs $len,$len,#64
> > ldp x9,x13,[$inp,#48]
> > add $in2,$inp,#96
> > - adr $zeros,.Lzeros
> > + adrp $zeros,.Lzeros
> > + add $zeros,$zeros,#:lo12:.Lzeros
> >
> > lsl $padbit,$padbit,#24
> > add x15,$ctx,#48
> > @@ -885,10 +886,13 @@ poly1305_blocks_neon:
> > ret
> > .size poly1305_blocks_neon,.-poly1305_blocks_neon
> >
> > +.pushsection .rodata
> > .align 5
> > .Lzeros:
> > .long 0,0,0,0,0,0,0,0
> > .asciz "Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
> > +.popsection
> > +
>
> I'm getting the following error with next-20240806
To clarify my report: the error below disappears when this patch is reverted.
>
> make LLVM=1 ARCH=arm64 allyesconfig
> make LLVM=1 ARCH=arm64 -j$(nproc)
>
> ld.lld: error: vmlinux.a(arch/arm64/crypto/poly1305-core.o):(function poly1305_blocks_neon: .text+0x3d4): relocation R_AARCH64_ADR_PREL_LO21 out of range: 269166444 is not in [-1048576, 1048575]
>
> Full debug error with log context:
>
> ...
> + grep -q ^CONFIG_DEBUG_INFO_BTF=y include/config/auto.conf
> + strip_debug=1
> + vmlinux_link .tmp_vmlinux1
> + local output=.tmp_vmlinux1
> + local objs
> + local libs
> + local ld
> + local ldflags
> + local ldlibs
> + info LD .tmp_vmlinux1
> + printf %-7s %s\n LD .tmp_vmlinux1
> LD .tmp_vmlinux1
> + shift
> + is_enabled CONFIG_LTO_CLANG
> + grep -q ^CONFIG_LTO_CLANG=y include/config/auto.conf
> + is_enabled CONFIG_X86_KERNEL_IBT
> + grep -q ^CONFIG_X86_KERNEL_IBT=y include/config/auto.conf
> + objs=vmlinux.a
> + libs=./drivers/firmware/efi/libstub/lib.a
> + is_enabled CONFIG_MODULES
> + grep -q ^CONFIG_MODULES=y include/config/auto.conf
> + objs=vmlinux.a .vmlinux.export.o
> + objs=vmlinux.a .vmlinux.export.o init/version-timestamp.o
> + [ arm64 = um ]
> + wl=
> + ld=ld.lld
> + ldflags=-EL -maarch64elf -z norelro -z noexecstack --no-undefined -X -shared -Bsymbolic -z notext --no-apply-dynamic-relocs --fix-cortex-a53-843419 --build-id=sha1 -X --pack-dyn-relocs=relr --orphan-handling=error
> + ldlibs=
> + ldflags=-EL -maarch64elf -z norelro -z noexecstack --no-undefined -X -shared -Bsymbolic -z notext --no-apply-dynamic-relocs --fix-cortex-a53-843419 --build-id=sha1 -X --pack-dyn-relocs=relr --orphan-handling=error --script=./arch/arm64/kernel/vmlinux.lds
> + [ -n 1 ]
> + ldflags=-EL -maarch64elf -z norelro -z noexecstack --no-undefined -X -shared -Bsymbolic -z notext --no-apply-dynamic-relocs --fix-cortex-a53-843419 --build-id=sha1 -X --pack-dyn-relocs=relr --orphan-handling=error --script=./arch/arm64/kernel/vmlinux.lds --strip-debug
> + is_enabled CONFIG_VMLINUX_MAP
> + grep -q ^CONFIG_VMLINUX_MAP=y include/config/auto.conf
> + ldflags=-EL -maarch64elf -z norelro -z noexecstack --no-undefined -X -shared -Bsymbolic -z notext --no-apply-dynamic-relocs --fix-cortex-a53-843419 --build-id=sha1 -X --pack-dyn-relocs=relr --orphan-handling=error --script=./arch/arm64/kernel/vmlinux.lds --strip-debug -Map=.tmp_vmlinux1.map
> + ld.lld -EL -maarch64elf -z norelro -z noexecstack --no-undefined -X -shared -Bsymbolic -z notext --no-apply-dynamic-relocs --fix-cortex-a53-843419 --build-id=sha1 -X --pack-dyn-relocs=relr --orphan-handling=error --script=./arch/arm64/kernel/vmlinux.lds --strip-debug -Map=.tmp_vmlinux1.map -o .tmp_vmlinux1 --whole-archive vmlinux.a .vmlinux.export.o init/version-timestamp.o --no-whole-archive --start-group ./drivers/firmware/efi/libstub/lib.a --end-group .tmp_vmlinux0.kallsyms.o
> ld.lld: error: vmlinux.a(arch/arm64/crypto/poly1305-core.o):(function poly1305_blocks_neon: .text+0x3d4): relocation R_AARCH64_ADR_PREL_LO21 out of range: 269166444 is not in [-1048576, 1048575]
> make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
> make[1]: *** [/home/dagomez/src/linux-next/Makefile:1156: vmlinux] Error 2
> make: *** [Makefile:224: __sub-make] Error 2
>
> Any suggestion how to fix this?
>
> Daniel
>
> > .align 2
> > #if !defined(__KERNEL__) && !defined(_WIN64)
> > .comm OPENSSL_armcap_P,4,4
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists