[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240807-iio-adc-ad4695-buffered-read-v1-2-bdafc39b2283@baylibre.com>
Date: Wed, 7 Aug 2024 15:02:11 -0500
From: David Lechner <dlechner@...libre.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: David Lechner <dlechner@...libre.com>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Jonathan Corbet <corbet@....net>,
linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org
Subject: [PATCH 2/2] doc: iio: ad4695: document buffered read
The ad4695 driver has a quirk where the temperature channel can't be
enabled on its own for buffered reads, so we should document this.
Also, since there are 4 possible modes of reading conversion data, it
is useful to know which one is actually being used, namely the advanced
sequencer mode.
Signed-off-by: David Lechner <dlechner@...libre.com>
---
Documentation/iio/ad4695.rst | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/Documentation/iio/ad4695.rst b/Documentation/iio/ad4695.rst
index a33e573d61d6..af76ce2d0702 100644
--- a/Documentation/iio/ad4695.rst
+++ b/Documentation/iio/ad4695.rst
@@ -147,9 +147,19 @@ Unimplemented features
----------------------
- Additional wiring modes
-- Buffered reads
- Threshold events
- Oversampling
- Gain/offset calibration
- GPIO support
- CRC support
+
+Device buffers
+==============
+
+This driver supports hardware triggered buffers. This uses the "advanced
+sequencer" feature of the chip to trigger a burst of conversions.
+
+Due to hardware constraints, the temperature channel cannot be read on its own
+for buffered reads. At least one voltage channel must also be enabled.
+
+Also see :doc:`iio_devbuf` for more general information.
--
2.43.0
Powered by blists - more mailing lists