[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <qqb5ho7urmhy6e55efu3uxiz4gupikhiqgngilzx35djfgouf2@wlo336gdkoer>
Date: Thu, 8 Aug 2024 00:14:18 +0100
From: Andi Shyti <andi.shyti@...nel.org>
To: Mary Strodl <mstrodl@....rit.edu>
Cc: linux-kernel@...r.kernel.org, akpm@...ux-foundation.org,
urezki@...il.com, hch@...radead.org, linux-mm@...ck.org, lee@...nel.org,
linux-i2c@...r.kernel.org, s.hauer@...gutronix.de, christian.gmeiner@...il.com
Subject: Re: [PATCH v2 0/2] Add support for Congatec CGEB BIOS interface
Hi Mary,
On Thu, Aug 01, 2024 at 12:06:08PM GMT, Mary Strodl wrote:
> The following series adds support for the Congatec CGEB interface
> found on some Congatec x86 boards. The CGEB interface is a BIOS
> interface which provides access to onboard peripherals like I2C
> busses and watchdogs. It works by mapping BIOS code and searching
> for magic values which specify the entry points to the CGEB call.
> The CGEB call is an API provided by the BIOS which provides access
> to the functions in an ioctl like fashion.
>
> At the request of some folks last time this series went out, CGEB
> now has a userspace component which runs the x86 blob (rather than
> running it directly in the kernel), which sends requests back and
> forth using the cn_netlink API.
this little paragraph is the closest to a changelog I can see.
Could you please write up a real changlog and list all the
changes from v1 to v2?
You can do it as reply to this e-mail, but please, next time do
it either in the cover letter or for each patch.
Thanks,
Andi
> You can find a reference implementation of the userspace helper here:
> https://github.com/Mstrodl/cgeb-helper
>
> I didn't get an answer when I asked where the userspace component
> should live, so I didn't put a ton of work into getting the helper
> up to snuff since similar userspace helpers (like v86d) are not
> in-tree. If folks would like the helper in-tree, that's fine too.
>
> This series is based on the excellent work of Sascha Hauer and
> Christian Gmeiner. You can find their original work here:
>
> http://patchwork.ozlabs.org/patch/219756/
> http://patchwork.ozlabs.org/patch/219755/
> http://patchwork.ozlabs.org/patch/219757/
>
> http://patchwork.ozlabs.org/patch/483262/
> http://patchwork.ozlabs.org/patch/483264/
> http://patchwork.ozlabs.org/patch/483261/
> http://patchwork.ozlabs.org/patch/483263/
>
> Mary Strodl (1):
> x86: Add basic support for the Congatec CGEB BIOS interface
>
> Sascha Hauer (1):
> i2c: Add Congatec CGEB I2C driver
>
> drivers/i2c/busses/Kconfig | 7 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-congatec-cgeb.c | 189 ++++
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/congatec-cgeb.c | 1139 ++++++++++++++++++++++++
> include/linux/mfd/congatec-cgeb.h | 111 +++
> include/uapi/linux/connector.h | 4 +-
> 8 files changed, 1461 insertions(+), 1 deletion(-)
> create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
> create mode 100644 drivers/mfd/congatec-cgeb.c
> create mode 100644 include/linux/mfd/congatec-cgeb.h
>
> --
> 2.45.2
>
Powered by blists - more mailing lists