linux-kernel - [PATCH RESEND v3 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240807052359.290046-6-Shyam-sundar.S-k@amd.com>
Date: Wed, 7 Aug 2024 10:53:58 +0530
From: Shyam Sundar S K <Shyam-sundar.S-k@....com>
To: Alexandre Belloni <alexandre.belloni@...tlin.com>, Jarkko Nikula
	<jarkko.nikula@...ux.intel.com>
CC: Guruvendra Punugupati <Guruvendra.Punugupati@....com>, Krishnamoorthi M
	<krishnamoorthi.m@....com>, <linux-i3c@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, Shyam Sundar S K <Shyam-sundar.S-k@....com>
Subject: [PATCH RESEND v3 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters

The AMD HCI controller is currently unstable at 12.5 MHz. To address this,
a quirk is added to configure the clock rate to 9 MHz as a workaround,
with proportional adjustments to the Open-Drain (OD) and Push-Pull (PP)
values.

Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@....com>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@....com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@....com>
---
 drivers/i3c/master/mipi-i3c-hci/core.c       |  4 ++++
 drivers/i3c/master/mipi-i3c-hci/hci.h        |  2 ++
 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c | 25 +++++++++++++++++++-
 3 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index 0dbaa1333a0c..23cfdf0059ae 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -786,6 +786,10 @@ static int i3c_hci_init(struct i3c_hci *hci)
 		return ret;
 	}
 
+	/* Configure OD and PP timings for AMD platforms */
+	if (hci->quirks & HCI_QUIRK_OD_PP_TIMING)
+		amd_set_od_pp_timing(hci);
+
 	return 0;
 }
 
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index d94e49be3091..5a3b4a014d62 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -141,6 +141,7 @@ struct i3c_hci_dev_data {
 /* list of quirks */
 #define HCI_QUIRK_RAW_CCC	BIT(1)	/* CCC framing must be explicit */
 #define HCI_QUIRK_PIO_MODE	BIT(2)  /* Set PIO mode for AMD platforms */
+#define HCI_QUIRK_OD_PP_TIMING		BIT(3)  /* Set OD and PP timings for AMD platforms */
 
 
 /* global functions */
@@ -148,5 +149,6 @@ void mipi_i3c_hci_resume(struct i3c_hci *hci);
 void mipi_i3c_hci_pio_reset(struct i3c_hci *hci);
 void mipi_i3c_hci_dct_index_reset(struct i3c_hci *hci);
 void amd_i3c_hci_quirks_init(struct i3c_hci *hci);
+void amd_set_od_pp_timing(struct i3c_hci *hci);
 
 #endif
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
index 897c0231f585..6530b9b6128f 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
+++ b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
@@ -11,10 +11,33 @@
 #include <linux/i3c/master.h>
 #include "hci.h"
 
+/* Timing registers */
+#define HCI_SCL_I3C_OD_TIMING          0x214
+#define HCI_SCL_I3C_PP_TIMING          0x218
+#define HCI_SDA_HOLD_SWITCH_DLY_TIMING 0x230
+
+/* Timing values to configure 9MHz frequency */
+#define AMD_SCL_I3C_OD_TIMING          0x00cf00cf
+#define AMD_SCL_I3C_PP_TIMING          0x00160016
+
 void amd_i3c_hci_quirks_init(struct i3c_hci *hci)
 {
 #if defined(CONFIG_X86)
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		hci->quirks |= HCI_QUIRK_PIO_MODE;
+		hci->quirks |= HCI_QUIRK_OD_PP_TIMING;
+	}
 #endif
 }
+
+void amd_set_od_pp_timing(struct i3c_hci *hci)
+{
+	u32 data;
+
+	reg_write(HCI_SCL_I3C_OD_TIMING, AMD_SCL_I3C_OD_TIMING);
+	reg_write(HCI_SCL_I3C_PP_TIMING, AMD_SCL_I3C_PP_TIMING);
+	data = reg_read(HCI_SDA_HOLD_SWITCH_DLY_TIMING);
+	/* Configure maximum TX hold time */
+	data |= W0_MASK(18, 16);
+	reg_write(HCI_SDA_HOLD_SWITCH_DLY_TIMING, data);
+}
-- 
2.25.1