[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1d5252d5-ead1-4551-8723-2eb46d91faf0@ti.com>
Date: Wed, 7 Aug 2024 13:21:57 +0530
From: "Kumar, Udit" <u-kumar1@...com>
To: Manorit Chawdhry <m-chawdhry@...com>, Nishanth Menon <nm@...com>,
Vignesh
Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Neha Malcom Francis <n-francis@...com>,
Aniket Limaye <a-limaye@...com>, Beleswar Padhi <b-padhi@...com>,
Siddharth
Vadapalli <s-vadapalli@...com>, <u-kumar1@...com>
Subject: Re: [PATCH v3 2/5] arm64: dts: ti: k3-j784s4*: Remove bootph
properties from parent nodes
On 7/30/2024 3:23 PM, Manorit Chawdhry wrote:
> Removes bootph-* properties from parent nodes and aligns the bootph-* to
> other u-boot.dtsi
>
> Signed-off-by: Manorit Chawdhry <m-chawdhry@...com>
> ---
> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +--------
> arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 8 ++++----
> 2 files changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index ffa38f41679d..311844490027 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -461,7 +461,6 @@ J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */
> };
>
main_pmx0 has bootph-all in parent node, please consider to clean that
as well
> &wkup_pmx2 {
> - bootph-all;
> wkup_uart0_pins_default: wkup-uart0-default-pins {
> bootph-all;
> pinctrl-single,pins = <
> @@ -577,7 +576,6 @@ J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
> };
>
> &wkup_pmx0 {
> - bootph-all;
> mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
> bootph-all;
> pinctrl-single,pins = <
> @@ -597,7 +595,6 @@ J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
> };
>
> &wkup_pmx1 {
> - bootph-all;
> mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
> bootph-all;
> pinctrl-single,pins = <
> @@ -668,6 +665,7 @@ bucka12: buck12 {
> regulator-max-microvolt = <1100000>;
> regulator-boot-on;
> regulator-always-on;
> + bootph-pre-ram;
> };
>
> bucka3: buck3 {
> @@ -769,18 +767,15 @@ &ufs_wrapper {
> };
>
> &fss {
> - bootph-all;
> status = "okay";
> };
>
> &ospi0 {
> - bootph-all;
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
>
> flash@0 {
> - bootph-all;
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> @@ -837,13 +832,11 @@ partition@...0000 {
> };
>
> &ospi1 {
> - bootph-all;
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
>
> flash@0 {
> - bootph-all;
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <1>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> index f3a6ed1c979d..3f89277e3c2c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> @@ -7,7 +7,6 @@
>
> &cbass_mcu_wakeup {
> sms: system-controller@...83000 {
> - bootph-all;
> compatible = "ti,k2g-sci";
> ti,host-id = <12>;
>
> @@ -39,7 +38,6 @@ k3_reset: reset-controller {
> };
>
> wkup_conf: bus@...00000 {
> - bootph-all;
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -65,6 +63,7 @@ secure_proxy_sa3: mailbox@...00000 {
> * firmware on non-MPU processors
> */
> status = "disabled";
> + bootph-pre-ram;
> };
>
> mcu_ram: sram@...00000 {
> @@ -175,10 +174,10 @@ mcu_timer0: timer@...00000 {
> ti,timer-pwm;
> /* Non-MPU Firmware usage */
> status = "reserved";
> + bootph-all;
both nodes mcu_timer0 and mcu_timer1 as marked as
/* Non-MPU Firmware usage */, Please provide some message added bootph in first and removed from second
> };
>
> mcu_timer1: timer@...10000 {
> - bootph-all;
> compatible = "ti,am654-timer";
> reg = <0x00 0x40410000 0x00 0x400>;
> interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
> @@ -458,7 +457,6 @@ mcu_spi2: spi@...20000 {
> };
> [..]
Powered by blists - more mailing lists