[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240807100244.16872-1-kfting@nuvoton.com>
Date: Wed, 7 Aug 2024 18:02:37 +0800
From: warp5tw@...il.com
To: tali.perry@...oton.com,
Avi.Fishman@...oton.com,
tomer.maimon@...oton.com,
avifishman70@...il.com,
tmaimon77@...il.com,
tali.perry1@...il.com,
venture@...gle.com,
yuenn@...gle.com,
benjaminfair@...gle.com,
andi.shyti@...nel.org,
wsa+renesas@...g-engineering.com,
rand.sec96@...il.com,
kwliu@...oton.com,
jjliu0@...oton.com,
kfting@...oton.com,
warp5tw@...il.com
Cc: linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org
Subject: [PATCH v1 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch
From: Tyrone Ting <kfting@...oton.com>
This patchset includes the following fixes:
- Enable the target functionality in the interrupt handling routine when the
i2c transfer is about to finish.
- Correct the read/write operation procedure.
- Introduce a software flag to handle the bus error (BER) condition
which is not caused by the i2c transfer.
- Modify timeout calculation.
- Assign the client address earlier logically.
- Use an i2c frequency table for the frequency parameters assignment.
- Coding style fix.
The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.
Charles Boyer (1):
i2c-npcm7xx.c: Enable slave in eob interrupt
Tyrone Ting (6):
i2c: npcm: correct the read/write operation procedure
i2c: npcm: use a software flag to indicate a BER condition
i2c: npcm: Modify timeout evaluation mechanism
i2c: npcm: Modify the client address assignment
drivers: i2c: use i2c frequency table
i2c: npcm: fix checkpatch
drivers/i2c/busses/i2c-npcm7xx.c | 266 +++++++++++++++++++------------
1 file changed, 167 insertions(+), 99 deletions(-)
--
2.34.1
Powered by blists - more mailing lists