Message-Id: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com>
Date: Fri, 09 Aug 2024 14:41:07 -0400
From: Trevor Gamblin <tgamblin@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>, 
 Michael Hennerich <Michael.Hennerich@...log.com>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>, 
 David Lechner <dlechner@...libre.com>, 
 Uwe Kleine-Konig <u.kleine-koenig@...libre.com>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org, 
 Trevor Gamblin <tgamblin@...libre.com>
Subject: [PATCH v2 0/3] iio: adc: add new ad7625 driver

This series adds a new driver for the Analog Devices Inc. AD7625,
AD7626, AD7960, and AD7961. These chips are part of a family of
LVDS-based SAR ADCs. The initial driver implementation does not support
the devices' self-clocked mode, although that can be added later.

The devices make use of two offset PWM signals, one to trigger
conversions and the other as a burst signal for transferring data to the
host. These rely on the new PWM waveform functionality being
reviewed in [1] and also available at [2].

This work is being done by BayLibre and on behalf of Analog Devices
Inc., hence the maintainers are @analog.com.

Special thanks to David Lechner for his guidance and reviews.

[1]: https://lore.kernel.org/linux-pwm/cover.1722261050.git.u.kleine-koenig@baylibre.com
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git/log/?h=pwm/chardev

Signed-off-by: Trevor Gamblin <tgamblin@...libre.com>
---
Changes in v2:
- Link to v1 (marked as RFC): https://lore.kernel.org/r/20240731-ad7625_r1-v1-0-a1efef5a2ab9@baylibre.com
- Include link to required PWM patch series in cover letter (missing before)
- Include new link to the pwm/chardev branch of Uwe's kernel tree
  
  [PATCH 1/3]
  - Rework dt bindings to be compliant using make dt_binding_check
  - Add "adi,no-dco" flag to address indication of how DCO lines are
    configured
  - Fix binding patch message
  - Remove chip packaging info from binding description
  - Move comments around to be clearer

  [PATCH 2/3]
  - Remove ad7625_pwm_disable(), call pwm_disable() directly
  - Add ad7625_buffer_preenable() and ad7625_buffer_postdisable()
    functions
  - Add devm_ad7625_regulator_setup() function, move all regulator logic
    to it, consolidate the comment blocks related to it above
  - Add have_refin flag in ad7625_state struct
  - Add pwm_waveform structs to ad7625_state struct for storing
    requested waveform characteristics
  - Refactor ad7625_set_sampling_freq() to set the pwm_waveform struct
    values in ad7625_state, limiting PWM enable/disable to
    preenable/postdisable functions
  - Remove redundant dev_err_probe() after devm_ad7625_pwm_get()
  - Use device_property_read_bool() instead of device_property_present()
  - General alignment and line wrapping fixes

  [PATCH 3/3]
  - No change

---
Trevor Gamblin (3):
      dt-bindings: iio: adc: add AD762x/AD796x ADCs
      iio: adc: ad7625: add driver
      docs: iio: new docs for ad7625 driver

 .../devicetree/bindings/iio/adc/adi,ad7625.yaml    | 175 ++++++
 Documentation/iio/ad7625.rst                       |  91 +++
 MAINTAINERS                                        |  11 +
 drivers/iio/adc/Kconfig                            |  15 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/ad7625.c                           | 688 +++++++++++++++++++++
 6 files changed, 981 insertions(+)
---
base-commit: ac6a258892793f0a255fe7084ec2b612131c67fc
change-id: 20240730-ad7625_r1-60d17ea28958

Best regards,
-- 
Trevor Gamblin <tgamblin@...libre.com>

Powered by blists - more mailing lists