[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240809-ak09918-v3-0-6b036db4d5ec@mainlining.org>
Date: Fri, 09 Aug 2024 22:25:38 +0200
From: Barnabás Czémán <barnabas.czeman@...nlining.org>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Jonathan Albrieux <jonathan.albrieux@...il.com>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux@...nlining.org,
Barnabás Czémán <barnabas.czeman@...nlining.org>,
Danila Tikhonov <danila@...xyga.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3 0/4] Add support for AK09918
Add support for AK09918 which is register and scaling compatible with
AK09912.
It was tested in Xiaomi Redmi 5 Plus (vince).
magnetometer@c {
compatible = "asahi-kasei,ak09918", "asahi-kasei,ak09912";
reg = <0x0c>;
vdd-supply = <&pm8953_l6>;
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "1";
};
Add a fix for data reading according to datasheet [1] (9.4.3.2.)
ST2 register have to be read out after read measurment data as third step
because ST2 will realasing the lock on the measurment data. Without it
the next reading will fail.
[1] https://www.akm.com/content/dam/documents/products/electronic-compass/ak09918c/ak09918c-en-datasheet.pdf
Signed-off-by: Barnabás Czémán <barnabas.czeman@...nlining.org>
---
Changes in v3:
- Relax failure on unknown device id
for support more register compatible variants.
- Change to fallback compatible.
- Make ST2 to be always read after measuremnt read.
- Reword fix commit with more explanation.
- Link to v2: https://lore.kernel.org/r/20240806-ak09918-v2-0-c300da66c198@mainlining.org
Changes in v2:
- Remove unnecessary ak09918 compatbile.
- Link to v1: https://lore.kernel.org/r/20240805-ak09918-v1-0-70837eebd7d8@mainlining.org
---
Barnabás Czémán (2):
iio: magnetometer: ak8975: Relax failure on unknown id
iio: magnetometer: ak8975: Fix reading for ak099xx sensors
Danila Tikhonov (2):
dt-bindings: iio: imu: magnetometer: Add ak09118
iio: magnetometer: ak8975: Add AK09118 support
.../iio/magnetometer/asahi-kasei,ak8975.yaml | 3 +
drivers/iio/magnetometer/Kconfig | 2 +-
drivers/iio/magnetometer/ak8975.c | 73 ++++++++++++++++------
3 files changed, 57 insertions(+), 21 deletions(-)
---
base-commit: 61c01d2e181adfba02fe09764f9fca1de2be0dbe
change-id: 20240805-ak09918-4a6cfef91c32
Best regards,
--
Barnabás Czémán <barnabas.czeman@...nlining.org>
Powered by blists - more mailing lists