[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<TY3PR01MB1114841B832015DD88D121EF0E5BA2@TY3PR01MB11148.jpnprd01.prod.outlook.com>
Date: Fri, 9 Aug 2024 06:08:11 +0000
From: "Tomohiro Misono (Fujitsu)" <misono.tomohiro@...itsu.com>
To: 'Ankur Arora' <ankur.a.arora@...cle.com>, "linux-pm@...r.kernel.org"
<linux-pm@...r.kernel.org>, "kvm@...r.kernel.org" <kvm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
CC: "catalin.marinas@....com" <catalin.marinas@....com>, "will@...nel.org"
<will@...nel.org>, "tglx@...utronix.de" <tglx@...utronix.de>,
"mingo@...hat.com" <mingo@...hat.com>, "bp@...en8.de" <bp@...en8.de>,
"dave.hansen@...ux.intel.com" <dave.hansen@...ux.intel.com>, "x86@...nel.org"
<x86@...nel.org>, "hpa@...or.com" <hpa@...or.com>, "pbonzini@...hat.com"
<pbonzini@...hat.com>, "wanpengli@...cent.com" <wanpengli@...cent.com>,
"vkuznets@...hat.com" <vkuznets@...hat.com>, "rafael@...nel.org"
<rafael@...nel.org>, "daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
"peterz@...radead.org" <peterz@...radead.org>, "arnd@...db.de"
<arnd@...db.de>, "lenb@...nel.org" <lenb@...nel.org>, "mark.rutland@....com"
<mark.rutland@....com>, "harisokn@...zon.com" <harisokn@...zon.com>,
"mtosatti@...hat.com" <mtosatti@...hat.com>, "sudeep.holla@....com"
<sudeep.holla@....com>, "cl@...two.org" <cl@...two.org>,
"joao.m.martins@...cle.com" <joao.m.martins@...cle.com>,
"boris.ostrovsky@...cle.com" <boris.ostrovsky@...cle.com>,
"konrad.wilk@...cle.com" <konrad.wilk@...cle.com>
Subject: RE: [PATCH v6 09/10] arm64: support cpuidle-haltpoll
> Subject: [PATCH v6 09/10] arm64: support cpuidle-haltpoll
>
> Add architectural support for cpuidle-haltpoll driver by defining
> arch_haltpoll_*().
>
> Also define ARCH_CPUIDLE_HALTPOLL to allow cpuidle-haltpoll to be
> selected, and given that we have an optimized polling mechanism
> in smp_cond_load*(), select ARCH_HAS_OPTIMIZED_POLL.
>
> smp_cond_load*() are implemented via LDXR, WFE, with LDXR loading
> a memory region in exclusive state and the WFE waiting for any
> stores to it.
>
> In the edge case -- no CPU stores to the waited region and there's no
> interrupt -- the event-stream will provide the terminating condition
> ensuring we don't wait forever, but because the event-stream runs at
> a fixed frequency (configured at 10kHz) we might spend more time in
> the polling stage than specified by cpuidle_poll_time().
>
> This would only happen in the last iteration, since overshooting the
> poll_limit means the governor moves out of the polling stage.
>
> Signed-off-by: Ankur Arora <ankur.a.arora@...cle.com>
> ---
> arch/arm64/Kconfig | 10 ++++++++++
> arch/arm64/include/asm/cpuidle_haltpoll.h | 9 +++++++++
> arch/arm64/kernel/cpuidle.c | 23 +++++++++++++++++++++++
FYI, arch/arm64/kernel/cpuidle.c is move to drivers/acpi/arm64/ in 6.11
and therefore I couldn't apply the series to 6.11.
https://github.com/torvalds/linux/commit/99e7a8adc0ca906151f5d70ff68b8a81f53fd106
Regards,
Tomohiro Misono
> 3 files changed, 42 insertions(+)
> create mode 100644 arch/arm64/include/asm/cpuidle_haltpoll.h
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 5d91259ee7b5..cf1c6681eb0a 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -35,6 +35,7 @@ config ARM64
> select ARCH_HAS_MEMBARRIER_SYNC_CORE
> select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
> select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
> + select ARCH_HAS_OPTIMIZED_POLL
> select ARCH_HAS_PTE_DEVMAP
> select ARCH_HAS_PTE_SPECIAL
> select ARCH_HAS_HW_PTE_YOUNG
> @@ -2376,6 +2377,15 @@ config ARCH_HIBERNATION_HEADER
> config ARCH_SUSPEND_POSSIBLE
> def_bool y
>
> +config ARCH_CPUIDLE_HALTPOLL
> + bool "Enable selection of the cpuidle-haltpoll driver"
> + default n
> + help
> + cpuidle-haltpoll allows for adaptive polling based on
> + current load before entering the idle state.
> +
> + Some virtualized workloads benefit from using it.
> +
> endmenu # "Power management options"
>
> menu "CPU Power Management"
> diff --git a/arch/arm64/include/asm/cpuidle_haltpoll.h b/arch/arm64/include/asm/cpuidle_haltpoll.h
> new file mode 100644
> index 000000000000..65f289407a6c
> --- /dev/null
> +++ b/arch/arm64/include/asm/cpuidle_haltpoll.h
> @@ -0,0 +1,9 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ARCH_HALTPOLL_H
> +#define _ARCH_HALTPOLL_H
> +
> +static inline void arch_haltpoll_enable(unsigned int cpu) { }
> +static inline void arch_haltpoll_disable(unsigned int cpu) { }
> +
> +bool arch_haltpoll_want(bool force);
> +#endif
> diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c
> index f372295207fb..334df82a0eac 100644
> --- a/arch/arm64/kernel/cpuidle.c
> +++ b/arch/arm64/kernel/cpuidle.c
> @@ -72,3 +72,26 @@ __cpuidle int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
> lpi->index, state);
> }
> #endif
> +
> +#if IS_ENABLED(CONFIG_HALTPOLL_CPUIDLE)
> +
> +#include <asm/cpuidle_haltpoll.h>
> +
> +bool arch_haltpoll_want(bool force)
> +{
> + /*
> + * Enabling haltpoll requires two things:
> + *
> + * - Event stream support to provide a terminating condition to the
> + * WFE in the poll loop.
> + *
> + * - KVM support for arch_haltpoll_enable(), arch_haltpoll_enable().
> + *
> + * Given that the second is missing, allow haltpoll to only be force
> + * loaded.
> + */
> + return (arch_timer_evtstrm_available() && false) || force;
> +}
> +
> +EXPORT_SYMBOL_GPL(arch_haltpoll_want);
> +#endif
> --
> 2.43.5
Powered by blists - more mailing lists