[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <22384730.EfDdHjke4D@steina-w>
Date: Fri, 09 Aug 2024 09:51:03 +0200
From: Alexander Stein <alexander.stein@...tq-group.com>
To: soc@...nel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>, Andrew Jeffery <andrew@...econstruct.com.au>, Dinh Nguyen <dinguyen@...nel.org>, Andrew Lunn <andrew@...n.ch>, Gregory Clement <gregory.clement@...tlin.com>, Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>, Avi Fishman <avifishman70@...il.com>, Tomer Maimon <tmaimon77@...il.com>, Tali Perry <tali.perry1@...il.com>, Patrick Venture <venture@...gle.com>, Nancy Yuen <yuenn@...gle.com>, Benjamin Fair <benjaminfair@...gle.com>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, Vladimir Zapolskiy <vz@...ia.com>, Mark Jackson <mpfj@...flow.co.uk>, Tony Lindgren <tony@...mide.com>, Michal Simek <michal.simek@....com>, linux-arm-kernel@...ts.infradead.org
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org, imx@...ts.linux.dev, linux-omap@...r.kernel.org, "Rob Herring (Arm)" <robh@...nel.org>
Subject: Re: [PATCH] ARM: dts: Fix undocumented LM75 compatible nodes
Am Donnerstag, 8. August 2024, 18:49:38 CEST schrieb Rob Herring (Arm):
> "lm75" without any vendor is undocumented. It works with the Linux
> kernel since the I2C subsystem will do matches of the compatible string
> without a vendor prefix to the i2c_device_id and/or driver name.
>
> Mostly replace "lm75" with "national,lm75" as that's the original part
> vendor and the compatible which matches what "lm75" matched with. In a
> couple of cases the node name or compatible gives a clue to the actual
> part and vendor and a more specific compatible can be used. In these
> cases, it does change the variant the kernel picks.
>
> "nct75" is an OnSemi part which is compatible with TI TMP75C based on
> a comparison of the OnSemi NCT75 datasheet and configuration the Linux
> driver uses. Adding an OnSemi compatible would be an ABI change.
>
> "nxp,lm75" is most likely an NXP part. NXP makes a LM75A and LM75B.
> Both are 11-bit resolution and 100ms sample time, so "national,lm75b" is
> the closest match.
>
> While we're here, fix the node names to use the generic name
> "temperature-sensor".
>
> Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
> ---
> SoC maintainers, Please take this directly.
> ---
> .../aspeed/aspeed-bmc-facebook-greatlakes.dts | 2 +-
> .../socfpga/socfpga_cyclone5_vining_fpga.dts | 4 +--
> .../dts/marvell/armada-385-clearfog-gtr.dtsi | 8 ++---
> .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 32 +++++++++----------
> .../boot/dts/nuvoton/nuvoton-npcm750-evb.dts | 6 ++--
> arch/arm/boot/dts/nxp/imx/imx53-mba53.dts | 4 +--
> arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi | 4 +--
> .../dts/nxp/lpc/lpc4357-ea4357-devkit.dts | 4 +--
> .../boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts | 2 +-
> arch/arm/boot/dts/ti/omap/am335x-nano.dts | 2 +-
> .../boot/dts/xilinx/zynq-zturn-common.dtsi | 4 +--
> 11 files changed, 36 insertions(+), 36 deletions(-)
>
< [snip]
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> index 2117de872703..d155b3ec22ef 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> @@ -175,8 +175,8 @@ expander: pca9554@20 {
> gpio-controller;
> };
>
> - sensor2: lm75@49 {
> - compatible = "lm75";
> + sensor2: temperature-sensor@49 {
> + compatible = "national,lm75";
I checked the old schematics. This is an NXP LM75A, so 'national,lm75a'
would be the correct compatible.
> reg = <0x49>;
> };
> };
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> index b2d7271d1d24..d01c3aee0272 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> @@ -254,8 +254,8 @@ pmic: mc34708@8 {
> interrupts = <6 4>; /* PATA_DATA6, active high */
> };
>
> - sensor1: lm75@48 {
> - compatible = "lm75";
> + sensor1: temperature-sensor@48 {
> + compatible = "national,lm75";
I checked the old schematics. This is an NXP LM75A, so 'national,lm75a'
would be the correct compatible.
Best regards,
Alexander
> reg = <0x48>;
> };
>
> [snip]
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists