Message-ID: <20240810214748.425520-1-luzmaximilian@gmail.com>
Date: Sat, 10 Aug 2024 23:47:46 +0200
From: Maximilian Luz <luzmaximilian@...il.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Maximilian Luz <luzmaximilian@...il.com>,
	Jean Delvare <jdelvare@...e.com>,
	Hans de Goede <hdegoede@...hat.com>,
	Ivor Wanders <ivor@...nders.net>,
	linux-kernel@...r.kernel.org,
	linux-hwmon@...r.kernel.org
Subject: [PATCH v3] hwmon: Add thermal sensor driver for Surface Aggregator Module

Some of the newer Microsoft Surface devices (such as the Surface Book
3 and Pro 9) have thermal sensors connected via the Surface Aggregator
Module (the embedded controller on those devices). Add a basic driver
to read out the temperature values of those sensors.

The EC can have up to 16 thermal sensors connected via a single
sub-device, each providing temperature readings and a label string.

Link: https://github.com/linux-surface/surface-aggregator-module/issues/59
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Co-developed-by: Ivor Wanders <ivor@...nders.net>
Signed-off-by: Ivor Wanders <ivor@...nders.net>
Signed-off-by: Maximilian Luz <luzmaximilian@...il.com>
---

Links:
 - v2: https://lore.kernel.org/lkml/20240804230832.247852-1-luzmaximilian@gmail.com
 - v1: https://lore.kernel.org/lkml/20240330112409.3402943-1-luzmaximilian@gmail.com

Changes in v3:
 - Fix dependencies in Kconfig

Changes in v2:
 - Drop patch 0003 ("platform/surface: aggregator_registry: Add support
   for thermal sensors on the Surface Pro 9") as it has already been
   applied.
 - Squash patches 0001 ("hwmon: Add thermal sensor driver for Surface
   Aggregator Module") and 0002 ("hwmon: surface_temp: Add support for
   sensor names") into a single patch.
 - Replace usage of WARN_ON() with dev_err().
 - Fix formatting and (strict) checkpatch complaints.

---
 MAINTAINERS                  |   6 +
 drivers/hwmon/Kconfig        |  11 ++
 drivers/hwmon/Makefile       |   1 +
 drivers/hwmon/surface_temp.c | 235 +++++++++++++++++++++++++++++++++++
 4 files changed, 253 insertions(+)
 create mode 100644 drivers/hwmon/surface_temp.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 8766f3e5e87e..3f53cb9242c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15200,6 +15200,12 @@ S:	Maintained
 F:	Documentation/hwmon/surface_fan.rst
 F:	drivers/hwmon/surface_fan.c
 
+MICROSOFT SURFACE SENSOR THERMAL DRIVER
+M:	Maximilian Luz <luzmaximilian@...il.com>
+L:	linux-hwmon@...r.kernel.org
+S:	Maintained
+F:	drivers/hwmon/surface_temp.c
+
 MICROSOFT SURFACE GPE LID SUPPORT DRIVER
 M:	Maximilian Luz <luzmaximilian@...il.com>
 L:	platform-driver-x86@...r.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e4d9a035a57a..5ac9ce8fa0a9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2080,6 +2080,17 @@ config SENSORS_SURFACE_FAN
 
 	  Select M or Y here, if you want to be able to read the fan's speed.
 
+config SENSORS_SURFACE_TEMP
+	tristate "Microsoft Surface Thermal Sensor Driver"
+	depends on SURFACE_AGGREGATOR
+	select SURFACE_AGGREGATOR_BUS
+	help
+	  Driver for monitoring thermal sensors connected via the Surface
+	  Aggregator Module (embedded controller) on Microsoft Surface devices.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called surface_temp.
+
 config SENSORS_ADC128D818
 	tristate "Texas Instruments ADC128D818"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b1c7056c37db..3ce8d6a9202e 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -209,6 +209,7 @@ obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_SPD5118)	+= spd5118.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
 obj-$(CONFIG_SENSORS_SURFACE_FAN)+= surface_fan.o
+obj-$(CONFIG_SENSORS_SURFACE_TEMP)+= surface_temp.o
 obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
diff --git a/drivers/hwmon/surface_temp.c b/drivers/hwmon/surface_temp.c
new file mode 100644
index 000000000000..cd21f331f157
--- /dev/null
+++ b/drivers/hwmon/surface_temp.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Thermal sensor subsystem driver for Surface System Aggregator Module (SSAM).
+ *
+ * Copyright (C) 2022-2023 Maximilian Luz <luzmaximilian@...il.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+/* -- SAM interface. -------------------------------------------------------- */
+
+/*
+ * Available sensors are indicated by a 16-bit bitfield, where a 1 marks the
+ * presence of a sensor. So we have at most 16 possible sensors/channels.
+ */
+#define SSAM_TMP_SENSOR_MAX_COUNT	16
+
+/*
+ * All names observed so far are 6 characters long, but there's only
+ * zeros after the name, so perhaps they can be longer. This number reflects
+ * the maximum zero-padded space observed in the returned buffer.
+ */
+#define SSAM_TMP_SENSOR_NAME_LENGTH	18
+
+struct ssam_tmp_get_name_rsp {
+	__le16 unknown1;
+	char unknown2;
+	char name[SSAM_TMP_SENSOR_NAME_LENGTH];
+} __packed;
+
+static_assert(sizeof(struct ssam_tmp_get_name_rsp) == 21);
+
+SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_tmp_get_available_sensors, __le16, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x04,
+});
+
+SSAM_DEFINE_SYNC_REQUEST_MD_R(__ssam_tmp_get_temperature, __le16, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x01,
+});
+
+SSAM_DEFINE_SYNC_REQUEST_MD_R(__ssam_tmp_get_name, struct ssam_tmp_get_name_rsp, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x0e,
+});
+
+static int ssam_tmp_get_available_sensors(struct ssam_device *sdev, s16 *sensors)
+{
+	__le16 sensors_le;
+	int status;
+
+	status = __ssam_tmp_get_available_sensors(sdev, &sensors_le);
+	if (status)
+		return status;
+
+	*sensors = le16_to_cpu(sensors_le);
+	return 0;
+}
+
+static int ssam_tmp_get_temperature(struct ssam_device *sdev, u8 iid, long *temperature)
+{
+	__le16 temp_le;
+	int status;
+
+	status = __ssam_tmp_get_temperature(sdev->ctrl, sdev->uid.target, iid, &temp_le);
+	if (status)
+		return status;
+
+	/* Convert 1/10 °K to 1/1000 °C */
+	*temperature = (le16_to_cpu(temp_le) - 2731) * 100L;
+	return 0;
+}
+
+static int ssam_tmp_get_name(struct ssam_device *sdev, u8 iid, char *buf, size_t buf_len)
+{
+	struct ssam_tmp_get_name_rsp name_rsp;
+	int status;
+
+	status =  __ssam_tmp_get_name(sdev->ctrl, sdev->uid.target, iid, &name_rsp);
+	if (status)
+		return status;
+
+	/*
+	 * This should not fail unless the name in the returned struct is not
+	 * null-terminated or someone changed something in the struct
+	 * definitions above, since our buffer and struct have the same
+	 * capacity by design. So if this fails, log an error message. Since
+	 * the more likely cause is that the returned string isn't
+	 * null-terminated, we might have received garbage (as opposed to just
+	 * an incomplete string), so also fail the function.
+	 */
+	status = strscpy(buf, name_rsp.name, buf_len);
+	if (status < 0) {
+		dev_err(&sdev->dev, "received non-null-terminated sensor name string\n");
+		return status;
+	}
+
+	return 0;
+}
+
+/* -- Driver.---------------------------------------------------------------- */
+
+struct ssam_temp {
+	struct ssam_device *sdev;
+	s16 sensors;
+	char names[SSAM_TMP_SENSOR_MAX_COUNT][SSAM_TMP_SENSOR_NAME_LENGTH];
+};
+
+static umode_t ssam_temp_hwmon_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	const struct ssam_temp *ssam_temp = data;
+
+	if (!(ssam_temp->sensors & BIT(channel)))
+		return 0;
+
+	return 0444;
+}
+
+static int ssam_temp_hwmon_read(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, long *value)
+{
+	const struct ssam_temp *ssam_temp = dev_get_drvdata(dev);
+
+	return ssam_tmp_get_temperature(ssam_temp->sdev, channel + 1, value);
+}
+
+static int ssam_temp_hwmon_read_string(struct device *dev,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel, const char **str)
+{
+	const struct ssam_temp *ssam_temp = dev_get_drvdata(dev);
+
+	*str = ssam_temp->names[channel];
+	return 0;
+}
+
+static const struct hwmon_channel_info * const ssam_temp_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops ssam_temp_hwmon_ops = {
+	.is_visible = ssam_temp_hwmon_is_visible,
+	.read = ssam_temp_hwmon_read,
+	.read_string = ssam_temp_hwmon_read_string,
+};
+
+static const struct hwmon_chip_info ssam_temp_hwmon_chip_info = {
+	.ops = &ssam_temp_hwmon_ops,
+	.info = ssam_temp_hwmon_info,
+};
+
+static int ssam_temp_probe(struct ssam_device *sdev)
+{
+	struct ssam_temp *ssam_temp;
+	struct device *hwmon_dev;
+	s16 sensors;
+	int channel;
+	int status;
+
+	status = ssam_tmp_get_available_sensors(sdev, &sensors);
+	if (status)
+		return status;
+
+	ssam_temp = devm_kzalloc(&sdev->dev, sizeof(*ssam_temp), GFP_KERNEL);
+	if (!ssam_temp)
+		return -ENOMEM;
+
+	ssam_temp->sdev = sdev;
+	ssam_temp->sensors = sensors;
+
+	/* Retrieve the name for each available sensor. */
+	for (channel = 0; channel < SSAM_TMP_SENSOR_MAX_COUNT; channel++) {
+		if (!(sensors & BIT(channel)))
+			continue;
+
+		status = ssam_tmp_get_name(sdev, channel + 1, ssam_temp->names[channel],
+					   SSAM_TMP_SENSOR_NAME_LENGTH);
+		if (status)
+			return status;
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&sdev->dev, "surface_thermal", ssam_temp,
+							 &ssam_temp_hwmon_chip_info, NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct ssam_device_id ssam_temp_match[] = {
+	{ SSAM_SDEV(TMP, SAM, 0x00, 0x02) },
+	{ },
+};
+MODULE_DEVICE_TABLE(ssam, ssam_temp_match);
+
+static struct ssam_device_driver ssam_temp = {
+	.probe = ssam_temp_probe,
+	.match_table = ssam_temp_match,
+	.driver = {
+		.name = "surface_temp",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_ssam_device_driver(ssam_temp);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@...il.com>");
+MODULE_DESCRIPTION("Thermal sensor subsystem driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
-- 
2.46.0

Powered by blists - more mailing lists