lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240810035141.439024-5-jacobe.zang@wesion.com>
Date: Sat, 10 Aug 2024 11:51:40 +0800
From: Jacobe Zang <jacobe.zang@...ion.com>
To: robh@...nel.org,
	krzk+dt@...nel.org,
	heiko@...ech.de,
	kvalo@...nel.org,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	conor+dt@...nel.org,
	arend.vanspriel@...adcom.com
Cc: efectn@...tonmail.com,
	dsimic@...jaro.org,
	jagan@...eble.ai,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	arend@...adcom.com,
	linux-wireless@...r.kernel.org,
	netdev@...r.kernel.org,
	megi@....cz,
	duoming@....edu.cn,
	bhelgaas@...gle.com,
	minipli@...ecurity.net,
	brcm80211@...ts.linux.dev,
	brcm80211-dev-list.pdl@...adcom.com,
	nick@...das.com,
	Jacobe Zang <jacobe.zang@...ion.com>
Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock enable support

WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
to the top of brcmf_of_probe. Change function prototypes from void
to int and add appropriate errno's for return values that will be
send to bus when error occurred.

Co-developed-by: Ondrej Jirman <megi@....cz>
Signed-off-by: Ondrej Jirman <megi@....cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@...adcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@...adcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@...ion.com>
---
 .../broadcom/brcm80211/brcmfmac/bcmsdh.c      |  4 +-
 .../broadcom/brcm80211/brcmfmac/common.c      |  3 +-
 .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 +++++++++++--------
 .../wireless/broadcom/brcm80211/brcmfmac/of.h |  9 ++--
 .../broadcom/brcm80211/brcmfmac/pcie.c        |  3 ++
 .../broadcom/brcm80211/brcmfmac/sdio.c        | 24 ++++++---
 .../broadcom/brcm80211/brcmfmac/usb.c         |  3 ++
 7 files changed, 63 insertions(+), 36 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 13391c2d82aae..b2ede4e579c5c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 
 	/* try to attach to the target device */
 	sdiodev->bus = brcmf_sdio_probe(sdiodev);
-	if (!sdiodev->bus) {
-		ret = -ENODEV;
+	if (IS_ERR(sdiodev->bus)) {
+		ret = PTR_ERR(sdiodev->bus);
 		goto out;
 	}
 	brcmf_sdiod_host_fixup(sdiodev->func2->card->host);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index b24faae35873d..58d50918dd177 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -561,7 +561,8 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
 	if (!found) {
 		/* No platform data for this device, try OF and DMI data */
 		brcmf_dmi_probe(settings, chip, chiprev);
-		brcmf_of_probe(dev, bus_type, settings);
+		if (brcmf_of_probe(dev, bus_type, settings) == -EPROBE_DEFER)
+			return ERR_PTR(-EPROBE_DEFER);
 		brcmf_acpi_probe(dev, bus_type, settings);
 	}
 	return settings;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index e406e11481a62..f19dc7355e0e8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -6,6 +6,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
+#include <linux/clk.h>
 
 #include <defs.h>
 #include "debug.h"
@@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device *dev,
 	return 0;
 }
 
-void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
-		    struct brcmf_mp_device *settings)
+int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+		   struct brcmf_mp_device *settings)
 {
 	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
 	struct device_node *root, *np = dev->of_node;
+	struct clk *clk;
 	const char *prop;
 	int irq;
 	int err;
 	u32 irqf;
 	u32 val;
 
+	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+		return 0;
+
 	/* Apple ARM64 platforms have their own idea of board type, passed in
 	 * via the device tree. They also have an antenna SKU parameter
 	 */
@@ -105,7 +110,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		board_type = devm_kstrdup(dev, tmp, GFP_KERNEL);
 		if (!board_type) {
 			of_node_put(root);
-			return;
+			return 0;
 		}
 		strreplace(board_type, '/', '-');
 		settings->board_type = board_type;
@@ -113,33 +118,39 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		of_node_put(root);
 	}
 
-	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
-		return;
-
 	err = brcmf_of_get_country_codes(dev, settings);
 	if (err)
 		brcmf_err("failed to get OF country code map (err=%d)\n", err);
 
 	of_get_mac_address(np, settings->mac);
 
-	if (bus_type != BRCMF_BUSTYPE_SDIO)
-		return;
+	if (bus_type == BRCMF_BUSTYPE_SDIO) {
+		if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
+			sdio->drive_strength = val;
 
-	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-		sdio->drive_strength = val;
+		/* make sure there are interrupts defined in the node */
+		if (!of_property_present(np, "interrupts"))
+			return 0;
 
-	/* make sure there are interrupts defined in the node */
-	if (!of_property_present(np, "interrupts"))
-		return;
+		irq = irq_of_parse_and_map(np, 0);
+		if (!irq) {
+			brcmf_err("interrupt could not be mapped\n");
+			return 0;
+		}
+		irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
+
+		sdio->oob_irq_supported = true;
+		sdio->oob_irq_nr = irq;
+		sdio->oob_irq_flags = irqf;
+	}
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		brcmf_err("interrupt could not be mapped\n");
-		return;
+	clk = devm_clk_get_optional_enabled(dev, "lpo");
+	if (!IS_ERR_OR_NULL(clk)) {
+		brcmf_dbg(INFO, "enabling 32kHz clock\n");
+		return clk_set_rate(clk, 32768);
+	} else {
+		return PTR_ERR_OR_ZERO(clk);
 	}
-	irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
 
-	sdio->oob_irq_supported = true;
-	sdio->oob_irq_nr = irq;
-	sdio->oob_irq_flags = irqf;
+	return 0;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
index 10bf52253337e..ae124c73fc3b7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
@@ -3,11 +3,12 @@
  * Copyright (c) 2014 Broadcom Corporation
  */
 #ifdef CONFIG_OF
-void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
-		    struct brcmf_mp_device *settings);
+int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+		   struct brcmf_mp_device *settings);
 #else
-static void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
-			   struct brcmf_mp_device *settings)
+static int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+			  struct brcmf_mp_device *settings)
 {
+	return 0;
 }
 #endif /* CONFIG_OF */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 06698a714b523..c34405a6d38b8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2457,6 +2457,9 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		ret = -ENOMEM;
 		goto fail;
 	}
+	ret = PTR_ERR_OR_ZERO(devinfo->settings);
+	if (ret < 0)
+		goto fail;
 
 	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
 	if (!bus) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 6b38d9de71af6..461b7ff3be24b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3943,7 +3943,7 @@ static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
 	.write32 = brcmf_sdio_buscore_write32,
 };
 
-static bool
+static int
 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
 	struct brcmf_sdio_dev *sdiodev;
@@ -3953,6 +3953,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	u32 reg_val;
 	u32 drivestrength;
 	u32 enum_base;
+	int ret = -EBADE;
 
 	sdiodev = bus->sdiodev;
 	sdio_claim_host(sdiodev->func1);
@@ -4001,8 +4002,9 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 						   BRCMF_BUSTYPE_SDIO,
 						   bus->ci->chip,
 						   bus->ci->chiprev);
-	if (!sdiodev->settings) {
+	if (IS_ERR_OR_NULL(sdiodev->settings)) {
 		brcmf_err("Failed to get device parameters\n");
+		ret = PTR_ERR_OR_ZERO(sdiodev->settings);
 		goto fail;
 	}
 	/* platform specific configuration:
@@ -4071,7 +4073,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	/* allocate header buffer */
 	bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL);
 	if (!bus->hdrbuf)
-		return false;
+		return -ENOMEM;
 	/* Locate an appropriately-aligned portion of hdrbuf */
 	bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
 				    bus->head_align);
@@ -4082,11 +4084,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	if (bus->poll)
 		bus->pollrate = 1;
 
-	return true;
+	return 0;
 
 fail:
 	sdio_release_host(sdiodev->func1);
-	return false;
+	return ret;
 }
 
 static int
@@ -4446,13 +4448,16 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	struct brcmf_sdio *bus;
 	struct workqueue_struct *wq;
 	struct brcmf_fw_request *fwreq;
+	int probe_attach_result;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* Allocate private bus interface state */
 	bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
-	if (!bus)
+	if (!bus) {
+		ret = -ENOMEM;
 		goto fail;
+	}
 
 	bus->sdiodev = sdiodev;
 	sdiodev->bus = bus;
@@ -4467,6 +4472,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 				     dev_name(&sdiodev->func1->dev));
 	if (!wq) {
 		brcmf_err("insufficient memory to create txworkqueue\n");
+		ret = -ENOMEM;
 		goto fail;
 	}
 	brcmf_sdiod_freezer_count(sdiodev);
@@ -4474,8 +4480,10 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->brcmf_wq = wq;
 
 	/* attempt to attach to the dongle */
-	if (!(brcmf_sdio_probe_attach(bus))) {
+	probe_attach_result = brcmf_sdio_probe_attach(bus);
+	if (probe_attach_result < 0) {
 		brcmf_err("brcmf_sdio_probe_attach failed\n");
+		ret = probe_attach_result;
 		goto fail;
 	}
 
@@ -4546,7 +4554,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 
 fail:
 	brcmf_sdio_remove(bus);
-	return NULL;
+	return ERR_PTR(ret);
 }
 
 /* Detach and free everything */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 9a105e6debe1f..f7db46ae44906 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1272,6 +1272,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
 		ret = -ENOMEM;
 		goto fail;
 	}
+	ret = PTR_ERR_OR_ZERO(devinfo->settings);
+	if (ret < 0)
+		goto fail;
 
 	if (!brcmf_usb_dlneeded(devinfo)) {
 		ret = brcmf_alloc(devinfo->dev, devinfo->settings);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ