| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TYZPR06MB65688D45B46BFF3C2018442DF1852@TYZPR06MB6568.apcprd06.prod.outlook.com>
Date: Mon, 12 Aug 2024 00:54:25 +0000
From: Jammy Huang <jammy_huang@...eedtech.com>
To: Hans Verkuil <hverkuil@...all.nl>, "eajames@...ux.ibm.com"
<eajames@...ux.ibm.com>, "mchehab@...nel.org" <mchehab@...nel.org>,
"joel@....id.au" <joel@....id.au>, "andrew@...id.au" <andrew@...id.au>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-aspeed@...ts.ozlabs.org"
<linux-aspeed@...ts.ozlabs.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] media: aspeed: Allow to capture from SoC display (GFX)
Hi Hans,
Thanks for your review. I will follow up accordingly.
Regards,
Jammy Huang
> -----Original Message-----
> From: Hans Verkuil <hverkuil@...all.nl>
> Sent: Thursday, August 8, 2024 3:08 PM
> To: Jammy Huang <jammy_huang@...eedtech.com>;
> eajames@...ux.ibm.com; mchehab@...nel.org; joel@....id.au;
> andrew@...id.au; linux-media@...r.kernel.org; openbmc@...ts.ozlabs.org;
> linux-arm-kernel@...ts.infradead.org; linux-aspeed@...ts.ozlabs.org;
> linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v2] media: aspeed: Allow to capture from SoC display (GFX)
>
> On 08/07/2024 02:59, Jammy Huang wrote:
> > ASPEED BMC IC has 2 different display engines. Please find AST2600's
> > datasheet to get detailed information.
> >
> > 1. VGA on PCIe
> > 2. SoC Display (GFX)
> >
> > By default, video engine (VE) will capture video from VGA. This patch
> > adds an option to capture video from GFX with standard ioctl,
> > vidioc_s_input.
> >
> > An enum, aspeed_video_input, is added for this purpose.
> > enum aspeed_video_input {
> > VIDEO_INPUT_VGA = 0,
> > VIDEO_INPUT_GFX,
> > VIDEO_INPUT_MAX
> > };
> >
> > To test this feature, you will need to enable GFX first. Please refer
> > to ASPEED's SDK_User_Guide, 6.3.x Soc Display driver, for more information.
> > In your application, you will need to use v4l2 ioctl, VIDIOC_S_INPUT,
> > as below to select before start streaming.
> >
> > int rc;
> > struct v4l2_input input;
> >
> > input.index = VIDEO_INPUT_GFX;
> > rc = ioctl(fd, VIDIOC_S_INPUT, &input); if (rc < 0) {
> > ...
> > }
> >
> > Link: https://github.com/AspeedTech-BMC/openbmc/releases
> > Signed-off-by: Jammy Huang <jammy_huang@...eedtech.com>
> > ---
> > drivers/media/platform/aspeed/aspeed-video.c | 189
> ++++++++++++++++---
> > include/uapi/linux/aspeed-video.h | 7 +
> > 2 files changed, 170 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/media/platform/aspeed/aspeed-video.c
> > b/drivers/media/platform/aspeed/aspeed-video.c
> > index fc6050e3be0d..79dbec113f3f 100644
> > --- a/drivers/media/platform/aspeed/aspeed-video.c
> > +++ b/drivers/media/platform/aspeed/aspeed-video.c
> > @@ -25,6 +25,8 @@
> > #include <linux/workqueue.h>
> > #include <linux/debugfs.h>
> > #include <linux/ktime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/syscon.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-dev.h>
> > #include <media/v4l2-device.h>
> > @@ -203,6 +205,25 @@
> > #define VE_MEM_RESTRICT_START 0x310
> > #define VE_MEM_RESTRICT_END 0x314
> >
> > +/* SCU's registers */
> > +#define SCU_MISC_CTRL 0xC0
> > +#define SCU_DPLL_SOURCE BIT(20)
> > +
> > +/* GFX's registers */
> > +#define GFX_CTRL 0x60
> > +#define GFX_CTRL_ENABLE BIT(0)
> > +#define GFX_CTRL_FMT GENMASK(9, 7)
> > +
> > +#define GFX_H_DISPLAY 0x70
> > +#define GFX_H_DISPLAY_DE GENMASK(28, 16)
> > +#define GFX_H_DISPLAY_TOTAL GENMASK(12, 0)
> > +
> > +#define GFX_V_DISPLAY 0x78
> > +#define GFX_V_DISPLAY_DE GENMASK(27, 16)
> > +#define GFX_V_DISPLAY_TOTAL GENMASK(11, 0)
> > +
> > +#define GFX_DISPLAY_ADDR 0x80
> > +
> > /*
> > * VIDEO_MODE_DETECT_DONE: a flag raised if signal lock
> > * VIDEO_RES_CHANGE: a flag raised if res_change work on-going
> > @@ -262,6 +283,7 @@ struct aspeed_video_perf {
> > /*
> > * struct aspeed_video - driver data
> > *
> > + * version: holds the version of aspeed SoC
> > * res_work: holds the delayed_work for res-detection if unlock
> > * buffers: holds the list of buffer queued from user
> > * flags: holds the state of video
> > @@ -273,6 +295,7 @@ struct aspeed_video_perf {
> > * yuv420: a flag raised if JPEG subsampling is 420
> > * format: holds the video format
> > * hq_mode: a flag raised if HQ is enabled. Only for
> VIDEO_FMT_ASPEED
> > + * input: holds the video input
> > * frame_rate: holds the frame_rate
> > * jpeg_quality: holds jpeq's quality (0~11)
> > * jpeg_hq_quality: holds hq's quality (1~12) only if hq_mode enabled
> > @@ -298,6 +321,9 @@ struct aspeed_video {
> > struct video_device vdev;
> > struct mutex video_lock; /* v4l2 and videobuf2 lock */
> >
> > + struct regmap *scu;
> > + struct regmap *gfx;
> > + u32 version;
> > u32 jpeg_mode;
> > u32 comp_size_read;
> >
> > @@ -316,6 +342,7 @@ struct aspeed_video {
> > bool yuv420;
> > enum aspeed_video_format format;
> > bool hq_mode;
> > + enum aspeed_video_input input;
> > unsigned int frame_rate;
> > unsigned int jpeg_quality;
> > unsigned int jpeg_hq_quality;
> > @@ -331,21 +358,25 @@ struct aspeed_video { #define
> > to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
> >
> > struct aspeed_video_config {
> > + u32 version;
> > u32 jpeg_mode;
> > u32 comp_size_read;
> > };
> >
> > static const struct aspeed_video_config ast2400_config = {
> > + .version = 4,
> > .jpeg_mode = AST2400_VE_SEQ_CTRL_JPEG_MODE,
> > .comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK, };
> >
> > static const struct aspeed_video_config ast2500_config = {
> > + .version = 5,
> > .jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
> > .comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK, };
> >
> > static const struct aspeed_video_config ast2600_config = {
> > + .version = 6,
> > .jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
> > .comp_size_read = AST2600_VE_COMP_SIZE_READ_BACK, }; @@
> -485,6
> > +516,7 @@ static const struct v4l2_dv_timings_cap
> > aspeed_video_timings_cap = {
> >
> > static const char * const format_str[] = {"Standard JPEG",
> > "Aspeed JPEG"};
> > +static const char * const input_str[] = {"VGA", "BMC GFX"};
> >
> > static unsigned int debug;
> >
> > @@ -609,6 +641,14 @@ static int aspeed_video_start_frame(struct
> aspeed_video *video)
> > aspeed_video_free_buf(video, &video->bcd);
> > }
> >
> > + if (video->input == VIDEO_INPUT_GFX) {
> > + u32 val;
> > +
> > + // update input buffer address as gfx's
> > + regmap_read(video->gfx, GFX_DISPLAY_ADDR, &val);
> > + aspeed_video_write(video, VE_TGS_0, val);
> > + }
> > +
> > spin_lock_irqsave(&video->lock, flags);
> > buf = list_first_entry_or_null(&video->buffers,
> > struct aspeed_video_buffer, link); @@ -1026,9
> +1066,23 @@
> > static void aspeed_video_get_timings(struct aspeed_video *v,
> > }
> > }
> >
> > +static void aspeed_video_get_resolution_gfx(struct aspeed_video *video,
> > + struct v4l2_bt_timings *det) {
> > + u32 h_val, v_val;
> > +
> > + regmap_read(video->gfx, GFX_H_DISPLAY, &h_val);
> > + regmap_read(video->gfx, GFX_V_DISPLAY, &v_val);
> > +
> > + det->width = FIELD_GET(GFX_H_DISPLAY_DE, h_val) + 1;
> > + det->height = FIELD_GET(GFX_V_DISPLAY_DE, v_val) + 1;
> > + video->v4l2_input_status = 0;
> > +}
> > +
> > #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE,
> > &(v)->flags)
> >
> > -static void aspeed_video_get_resolution(struct aspeed_video *video)
> > +static void aspeed_video_get_resolution_vga(struct aspeed_video *video,
> > + struct v4l2_bt_timings *det)
> > {
> > bool invalid_resolution = true;
> > int rc;
> > @@ -1036,7 +1090,6 @@ static void aspeed_video_get_resolution(struct
> aspeed_video *video)
> > u32 mds;
> > u32 src_lr_edge;
> > u32 src_tb_edge;
> > - struct v4l2_bt_timings *det = &video->detected_timings;
> >
> > det->width = MIN_WIDTH;
> > det->height = MIN_HEIGHT;
> > @@ -1113,14 +1166,20 @@ static void aspeed_video_get_resolution(struct
> > aspeed_video *video)
> >
> > aspeed_video_get_timings(video, det);
> >
> > - /*
> > - * Enable mode-detect watchdog, resolution-change watchdog and
> > - * automatic compression after frame capture.
> > - */
> > + /* Enable mode-detect watchdog, resolution-change watchdog */
> > aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> > VE_INTERRUPT_MODE_DETECT_WD);
> > - aspeed_video_update(video, VE_SEQ_CTRL, 0,
> > - VE_SEQ_CTRL_AUTO_COMP |
> VE_SEQ_CTRL_EN_WATCHDOG);
> > + aspeed_video_update(video, VE_SEQ_CTRL, 0,
> VE_SEQ_CTRL_EN_WATCHDOG);
> > +}
> > +
> > +static void aspeed_video_get_resolution(struct aspeed_video *video) {
> > + struct v4l2_bt_timings *det = &video->detected_timings;
> > +
> > + if (video->input == VIDEO_INPUT_GFX)
> > + aspeed_video_get_resolution_gfx(video, det);
> > + else
> > + aspeed_video_get_resolution_vga(video, det);
> >
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
> > det->width, det->height);
> > @@ -1156,7 +1215,7 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
> >
> > /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
> > - if (size < DIRECT_FETCH_THRESHOLD) {
> > + if (video->input == VIDEO_INPUT_VGA && size <
> > +DIRECT_FETCH_THRESHOLD) {
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
> > aspeed_video_write(video, VE_TGS_0,
> > FIELD_PREP(VE_TGS_FIRST,
> > @@ -1171,10 +1230,20 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> > VE_CTRL_INT_DE);
> > } else {
> > + u32 ctrl, val, bpp;
> > +
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
> > + ctrl = VE_CTRL_DIRECT_FETCH;
> > + if (video->input == VIDEO_INPUT_GFX) {
> > + regmap_read(video->gfx, GFX_CTRL, &val);
> > + bpp = FIELD_GET(GFX_CTRL_FMT, val) ? 32 : 16;
> > + if (bpp == 16)
> > + ctrl |= VE_CTRL_INT_DE;
> > + aspeed_video_write(video, VE_TGS_1, act->width * (bpp >> 3));
> > + }
> > aspeed_video_update(video, VE_CTRL,
> > VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> > - VE_CTRL_DIRECT_FETCH);
> > + ctrl);
> > }
> >
> > size *= 4;
> > @@ -1207,6 +1276,22 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > aspeed_video_free_buf(video, &video->srcs[0]); }
> >
> > +/*
> > + * Update relative parameters when timing changed.
> > + *
> > + * @video: the struct of aspeed_video
> > + * @timings: the new timings
> > + */
> > +static void aspeed_video_update_timings(struct aspeed_video *video,
> > +struct v4l2_bt_timings *timings) {
> > + video->active_timings = *timings;
> > + aspeed_video_set_resolution(video);
> > +
> > + video->pix_fmt.width = timings->width;
> > + video->pix_fmt.height = timings->height;
> > + video->pix_fmt.sizeimage = video->max_compressed_size; }
> > +
> > static void aspeed_video_update_regs(struct aspeed_video *video) {
> > u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0, @@
> > -1219,6 +1304,8 @@ static void aspeed_video_update_regs(struct
> aspeed_video *video)
> > u32 ctrl = 0;
> > u32 seq_ctrl = 0;
> >
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "input(%s)\n",
> > + input_str[video->input]);
> > v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
> > video->frame_rate);
> > v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s)
> > subsample(%s)\n", @@ -1234,6 +1321,9 @@ static void
> aspeed_video_update_regs(struct aspeed_video *video)
> > else
> > aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD,
> 0);
> >
> > + if (video->input == VIDEO_INPUT_VGA)
> > + ctrl |= VE_CTRL_AUTO_OR_CURSOR;
> > +
> > if (video->frame_rate)
> > ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
> >
> > @@ -1252,7 +1342,9 @@ static void aspeed_video_update_regs(struct
> aspeed_video *video)
> > aspeed_video_update(video, VE_SEQ_CTRL,
> > video->jpeg_mode | VE_SEQ_CTRL_YUV420,
> > seq_ctrl);
> > - aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
> > + aspeed_video_update(video, VE_CTRL,
> > + VE_CTRL_FRC | VE_CTRL_AUTO_OR_CURSOR |
> > + VE_CTRL_SOURCE, ctrl);
> > aspeed_video_update(video, VE_COMP_CTRL,
> > VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR |
> > VE_COMP_CTRL_EN_HQ |
> VE_COMP_CTRL_HQ_DCT_LUM | @@ -1280,6
> > +1372,7 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
> > aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
> >
> > /* Set control registers */
> > + aspeed_video_write(video, VE_SEQ_CTRL, VE_SEQ_CTRL_AUTO_COMP);
> > aspeed_video_write(video, VE_CTRL, ctrl);
> > aspeed_video_write(video, VE_COMP_CTRL, VE_COMP_CTRL_RSVD);
> >
> > @@ -1311,12 +1404,7 @@ static void aspeed_video_start(struct
> aspeed_video *video)
> > aspeed_video_get_resolution(video);
> >
> > /* Set timings since the device is being opened for the first time */
> > - video->active_timings = video->detected_timings;
> > - aspeed_video_set_resolution(video);
> > -
> > - video->pix_fmt.width = video->active_timings.width;
> > - video->pix_fmt.height = video->active_timings.height;
> > - video->pix_fmt.sizeimage = video->max_compressed_size;
> > + aspeed_video_update_timings(video, &video->detected_timings);
> > }
> >
> > static void aspeed_video_stop(struct aspeed_video *video) @@ -1414,16
> > +1502,47 @@ static int aspeed_video_enum_input(struct file *file, void
> > *fh,
> >
> > static int aspeed_video_get_input(struct file *file, void *fh,
> > unsigned int *i) {
> > - *i = 0;
> > + struct aspeed_video *video = video_drvdata(file);
> > +
> > + *i = video->input;
> >
> > return 0;
> > }
> >
> > static int aspeed_video_set_input(struct file *file, void *fh,
> > unsigned int i) {
> > - if (i)
> > + struct aspeed_video *video = video_drvdata(file);
> > +
> > + if (i >= VIDEO_INPUT_MAX)
> > return -EINVAL;
> >
> > + if (IS_ERR(video->scu)) {
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: scu isn't ready for
> input-control\n", __func__);
> > + return -EINVAL;
> > + }
> > +
> > + if (IS_ERR(video->gfx) && i == VIDEO_INPUT_GFX) {
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: gfx isn't ready for GFX
> input\n", __func__);
> > + return -EINVAL;
> > + }
> > +
> > + video->input = i;
> > +
> > + if (video->version == 6) {
> > + /* modify dpll source per current input */
> > + if (video->input == VIDEO_INPUT_VGA)
> > + regmap_update_bits(video->scu, SCU_MISC_CTRL,
> SCU_DPLL_SOURCE, 0);
> > + else
> > + regmap_update_bits(video->scu, SCU_MISC_CTRL,
> SCU_DPLL_SOURCE, SCU_DPLL_SOURCE);
> > + }
> > +
> > + aspeed_video_update_regs(video);
> > +
> > + /* update signal status */
> > + aspeed_video_get_resolution(video);
> > + if (!video->v4l2_input_status)
> > + aspeed_video_update_timings(video, &video->detected_timings);
> > +
> > return 0;
> > }
>
> You forgot to update aspeed_video_enum_input()!
>
> If possible, always run v4l2-compliance (directly build from the v4l-utils git
> repo) whenever you make changes to ioctls like this, it would have caught this.
>
> Regards,
>
> Hans
>
> >
> > @@ -1527,13 +1646,7 @@ static int aspeed_video_set_dv_timings(struct
> file *file, void *fh,
> > if (vb2_is_busy(&video->queue))
> > return -EBUSY;
> >
> > - video->active_timings = timings->bt;
> > -
> > - aspeed_video_set_resolution(video);
> > -
> > - video->pix_fmt.width = timings->bt.width;
> > - video->pix_fmt.height = timings->bt.height;
> > - video->pix_fmt.sizeimage = video->max_compressed_size;
> > + aspeed_video_update_timings(video, &timings->bt);
> >
> > timings->type = V4L2_DV_BT_656_1120;
> >
> > @@ -1911,6 +2024,7 @@ static int aspeed_video_debugfs_show(struct
> seq_file *s, void *data)
> > val08 = aspeed_video_read(v, VE_CTRL);
> > if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) {
> > seq_printf(s, " %-20s:\tDirect fetch\n", "Mode");
> > + seq_printf(s, " %-20s:\t%s\n", "Input", input_str[v->input]);
> > seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode",
> > FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32");
> > } else {
> > @@ -2070,12 +2184,34 @@ static int aspeed_video_setup_video(struct
> aspeed_video *video)
> > return 0;
> > }
> >
> > +/*
> > + * Get regmap without checking res, such as clk/reset, that could
> > +lead to
> > + * conflict.
> > + */
> > +static struct regmap *aspeed_regmap_lookup(struct device_node *np,
> > +const char *property) {
> > + struct device_node *syscon_np;
> > + struct regmap *regmap;
> > +
> > + syscon_np = of_parse_phandle(np, property, 0);
> > + if (!syscon_np)
> > + return ERR_PTR(-ENODEV);
> > +
> > + regmap = device_node_to_regmap(syscon_np);
> > + of_node_put(syscon_np);
> > +
> > + return regmap;
> > +}
> > +
> > static int aspeed_video_init(struct aspeed_video *video) {
> > int irq;
> > int rc;
> > struct device *dev = video->dev;
> >
> > + video->scu = aspeed_regmap_lookup(dev->of_node, "aspeed,scu");
> > + video->gfx = aspeed_regmap_lookup(dev->of_node, "aspeed,gfx");
> > +
> > irq = irq_of_parse_and_map(dev->of_node, 0);
> > if (!irq) {
> > dev_err(dev, "Unable to find IRQ\n"); @@ -2167,6 +2303,7 @@
> static
> > int aspeed_video_probe(struct platform_device *pdev)
> > if (!config)
> > return -ENODEV;
> >
> > + video->version = config->version;
> > video->jpeg_mode = config->jpeg_mode;
> > video->comp_size_read = config->comp_size_read;
> >
> > diff --git a/include/uapi/linux/aspeed-video.h
> > b/include/uapi/linux/aspeed-video.h
> > index 6586a65548c4..15168e8c931e 100644
> > --- a/include/uapi/linux/aspeed-video.h
> > +++ b/include/uapi/linux/aspeed-video.h
> > @@ -8,6 +8,13 @@
> >
> > #include <linux/v4l2-controls.h>
> >
> > +/* aspeed video's input types */
> > +enum aspeed_video_input {
> > + VIDEO_INPUT_VGA = 0,
> > + VIDEO_INPUT_GFX,
> > + VIDEO_INPUT_MAX
> > +};
> > +
> > #define V4L2_CID_ASPEED_HQ_MODE
> (V4L2_CID_USER_ASPEED_BASE + 1)
> > #define V4L2_CID_ASPEED_HQ_JPEG_QUALITY
> (V4L2_CID_USER_ASPEED_BASE + 2)
> >
> >
> > base-commit: e9d22f7a6655941fc8b2b942ed354ec780936b3e
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
Powered by blists - more mailing lists