[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <172346965242.493337.13574697496053856.robh@kernel.org>
Date: Mon, 12 Aug 2024 07:34:12 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Christian Bruel <christian.bruel@...s.st.com>
Cc: kishon@...nel.org, fabrice.gasnier@...s.st.com,
linux-stm32@...md-mailman.stormreply.com, alexandre.torgue@...s.st.com,
p.zabel@...gutronix.de, vkoul@...nel.org, devicetree@...r.kernel.org,
conor+dt@...nel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, krzk+dt@...nel.org, mcoquelin.stm32@...il.com,
linux-phy@...ts.infradead.org
Subject: Re: [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
On Mon, 12 Aug 2024 14:05:26 +0200, Christian Bruel wrote:
> Document the bindings for STM32 COMBOPHY interface, used to support
> the PCIe and USB3 stm32mp25 drivers.
> Following entries can be used to tune caracterisation parameters
> - st,output-micro-ohms and st,output-vswing-microvolt bindings entries
> to tune the impedance and voltage swing using discrete simulation results
> - st, phy_rx0_eq register to set the internal rx equalizer filter value.
>
> Signed-off-by: Christian Bruel <christian.bruel@...s.st.com>
> ---
> .../bindings/phy/st,stm32-combophy.yaml | 178 ++++++++++++++++++
> 1 file changed, 178 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml: access-controllers: missing type definition
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240812120529.3564390-3-christian.bruel@foss.st.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists