linux-kernel - 回复: 回复: 回复: [PATCH] staging: media: starfive: Add multiple resolution support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID:
 <ZQ0PR01MB130236FA891A04350CBC4245F2852@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn>
Date: Mon, 12 Aug 2024 12:13:03 +0000
From: Changhuang Liang <changhuang.liang@...rfivetech.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
CC: Mauro Carvalho Chehab <mchehab@...nel.org>, Greg Kroah-Hartman
	<gregkh@...uxfoundation.org>, Hans Verkuil <hverkuil-cisco@...all.nl>, Jack
 Zhu <jack.zhu@...rfivetech.com>, "linux-media@...r.kernel.org"
	<linux-media@...r.kernel.org>, "linux-kernel@...r.kernel.org"
	<linux-kernel@...r.kernel.org>, "linux-staging@...ts.linux.dev"
	<linux-staging@...ts.linux.dev>
Subject:
 回复: 回复: 回复: [PATCH] staging: media: starfive: Add multiple resolution support

Hi, Laurent

> 
> Hi Changhuang,
> 
> On Mon, Aug 12, 2024 at 09:43:47AM +0000, Changhuang Liang wrote:
> > > On Fri, Aug 09, 2024 at 12:12:01PM +0000, Changhuang Liang wrote:
> > > > > On Fri, Apr 19, 2024 at 01:19:55AM -0700, Changhuang Liang wrote:
> > > > > > Add multiple resolution support for video "capture_raw" device.
> > > > > > Otherwise it will capture the wrong image data if the width is not
> 1920.
> > > > > >
> > > > > > Fixes: e080f339c80a ("media: staging: media: starfive: camss:
> > > > > > Add capture driver")
> > > > > >
> > > > > > Signed-off-by: Changhuang Liang
> > > > > > <changhuang.liang@...rfivetech.com>
> > > > > > ---
> > > > > >  drivers/staging/media/starfive/camss/stf-capture.c | 5 ++++-
> > > > > >  1 file changed, 4 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git
> > > > > > a/drivers/staging/media/starfive/camss/stf-capture.c
> > > > > > b/drivers/staging/media/starfive/camss/stf-capture.c
> > > > > > index ec5169e7b391..9e853ff2596a 100644
> > > > > > --- a/drivers/staging/media/starfive/camss/stf-capture.c
> > > > > > +++ b/drivers/staging/media/starfive/camss/stf-capture.c
> > > > > > @@ -177,9 +177,12 @@ static void stf_channel_set(struct
> > > > > > stfcamss_video
> > > > > > *video)  {
> > > > > >  	struct stf_capture *cap = to_stf_capture(video);
> > > > > >  	struct stfcamss *stfcamss = cap->video.stfcamss;
> > > > > > +	struct v4l2_pix_format *pix;
> > > > >
> > > > > This variable can be const as you don't modify the format.
> > > > >
> > > > > >  	u32 val;
> > > > > >
> > > > > >  	if (cap->type == STF_CAPTURE_RAW) {
> > > > > > +		pix = &video->active_fmt.fmt.pix;
> > > > >
> > > > > And it can be declared and initialized here:
> > > > >
> > > > > 		const struct v4l2_pix_format *pix =
> > > > > &video->active_fmt.fmt.pix;
> > > > >
> > > > > > +
> > > > > >  		val = stf_syscon_reg_read(stfcamss,
> VIN_CHANNEL_SEL_EN);
> > > > > >  		val &= ~U0_VIN_CHANNEL_SEL_MASK;
> > > > > >  		val |= CHANNEL(0);
> > > > > > @@ -193,7 +196,7 @@ static void stf_channel_set(struct
> stfcamss_video *video)
> > > > > >  		val |= PIXEL_HEIGH_BIT_SEL(0);
> > > > > >
> > > > > >  		val &= ~U0_VIN_PIX_CNT_END_MASK;
> > > > > > -		val |= PIX_CNT_END(IMAGE_MAX_WIDTH / 4 - 1);
> > > > > > +		val |= PIX_CNT_END(pix->width / 4 - 1);
> > > > >
> > > > > Is there no need to consider the image height as well ? How does
> > > > > the driver prevent buffer overflows if the sensor sends more data than
> expected ?
> > > >
> > > > Our hardware will confirm a frame of data through vblank signal,
> > > > so there is no image height configuration.
> > >
> > > What happens if the system expects, for instance, a 1920x1080 RAW8
> > > image, and allocates a buffer of of 1920x1080 bytes, but the sensor
> > > outputs more lines ? Does the camera hardware in the SoC offer an
> > > option to prevent buffer overruns ?
> >
> > The hardware can confirm the image height by using the VSYNC signal.
> >
> > Image will transfer when VSYNC is high.
> >
> > VSYNC time = (width + h_blank) * height;
> 
> What I'm trying to understand is what happens if the ISP is configured for
> 1080 lines, but the camera sensor sends more than 1080 lines (the VSYNC
> signal is active for more than 1080 lines). Where in the driver is the hardware
> configure with the 1080 lines limit to avoid buffer overflows ?
> 

If is "capture_raw" video device, no image height can be configured.
If is "capture_yuv" video device, it will be set by stf_isp_config_crop.

Regards,
Changhuang