[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240812135231.43744-7-andrei.simion@microchip.com>
Date: Mon, 12 Aug 2024 16:52:30 +0300
From: Andrei Simion <andrei.simion@...rochip.com>
To: <claudiu.beznea@...on.dev>, <broonie@...nel.org>, <lgirdwood@...il.com>,
<nicolas.ferre@...rochip.com>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<robh@...nel.org>, <alexandre.belloni@...tlin.com>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, Andrei Simion <andrei.simion@...rochip.com>,
Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH v2 6/7] ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@...rochip.com>
Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
Signed-off-by: Andrei Simion <andrei.simion@...rochip.com>
---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node
---
.../boot/dts/microchip/at91-sama5d27_wlsom1.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 4617805c7748..c173f49cb910 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -31,6 +31,14 @@ main_xtal {
};
};
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-wilc1000";
reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -70,6 +78,11 @@ &i2c1 {
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
+ lvin-supply = <®_5v>;
+ pvin1-supply = <®_5v>;
+ pvin2-supply = <®_5v>;
+ pvin3-supply = <®_5v>;
+ pvin4-supply = <®_5v>;
status = "okay";
lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
--
2.34.1
Powered by blists - more mailing lists