linux-kernel - [PATCH] power: sequencing: request the WLAN enable GPIO as-is

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240813190751.155035-1-brgl@bgdev.pl>
Date: Tue, 13 Aug 2024 21:07:50 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
	Stephan Gerhold <stephan.gerhold@...aro.org>
Subject: [PATCH] power: sequencing: request the WLAN enable GPIO as-is

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

If the WCN module is powered up before linux boots and the ath11k driver
probes at the same time as the power sequencing driver, we may end up
driving the wlan-enable GPIO low in the latter, breaking the start-up of
the WLAN module. Request the wlan-enable GPIO as-is so that if the WLAN
module is already starting/started, we leave it alone.

Fixes: 2f1630f437df ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Reported-by: Stephan Gerhold <stephan.gerhold@...aro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
 drivers/power/sequencing/pwrseq-qcom-wcn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c
index 42dacfda745e..d786cbf1b2cd 100644
--- a/drivers/power/sequencing/pwrseq-qcom-wcn.c
+++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c
@@ -283,7 +283,7 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev)
 				     "Failed to get the Bluetooth enable GPIO\n");
 
 	ctx->wlan_gpio = devm_gpiod_get_optional(dev, "wlan-enable",
-						 GPIOD_OUT_LOW);
+						 GPIOD_ASIS);
 	if (IS_ERR(ctx->wlan_gpio))
 		return dev_err_probe(dev, PTR_ERR(ctx->wlan_gpio),
 				     "Failed to get the WLAN enable GPIO\n");
-- 
2.43.0