linux-kernel - [PATCH 1/7] regulator: bd718x7: Use scoped device node handling to simplify error paths

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240814-cleanup-h-of-node-put-regulator-v1-1-87151088b883@linaro.org>
Date: Wed, 14 Aug 2024 17:04:05 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Matti Vaittinen <mazziesaccount@...il.com>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Krzysztof Kozlowski <krzk@...nel.org>, Sudeep Holla <sudeep.holla@....com>, 
 Cristian Marussi <cristian.marussi@....com>
Cc: linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, arm-scmi@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 1/7] regulator: bd718x7: Use scoped device node handling to
 simplify error paths

Obtain the device node reference with scoped/cleanup.h and use scoped
for_each_child_of_node_scoped() to reduce error handling and make the
code a bit simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
 drivers/regulator/bd718x7-regulator.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index c3fb05dce40c..1bb048de3ecd 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -2,6 +2,7 @@
 // Copyright (C) 2018 ROHM Semiconductors
 // bd71837-regulator.c ROHM BD71837MWV/BD71847MWV regulator driver
 
+#include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -1635,18 +1636,17 @@ static int get_special_regulators(struct device *dev,
 				  unsigned int num_reg_data, int *info)
 {
 	int ret;
-	struct device_node *np;
-	struct device_node *nproot = dev->of_node;
 	int uv;
 
 	*info = 0;
 
-	nproot = of_get_child_by_name(nproot, "regulators");
+	struct device_node *nproot __free(device_node) = of_get_child_by_name(dev->of_node,
+									      "regulators");
 	if (!nproot) {
 		dev_err(dev, "failed to find regulators node\n");
 		return -ENODEV;
 	}
-	for_each_child_of_node(nproot, np) {
+	for_each_child_of_node_scoped(nproot, np) {
 		if (of_property_read_bool(np, "rohm,no-regulator-enable-control"))
 			mark_hw_controlled(dev, np, reg_data, num_reg_data,
 					   info);
@@ -1656,22 +1656,15 @@ static int get_special_regulators(struct device *dev,
 			if (ret == -EINVAL)
 				continue;
 			else
-				goto err_out;
+				return ret;
 		}
 
 		ret = setup_feedback_loop(dev, np, reg_data, num_reg_data, uv);
 		if (ret)
-			goto err_out;
+			return ret;
 	}
 
-	of_node_put(nproot);
 	return 0;
-
-err_out:
-	of_node_put(np);
-	of_node_put(nproot);
-
-	return ret;
 }
 
 static int bd718xx_probe(struct platform_device *pdev)

-- 
2.43.0