[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8394ab04-5e5c-4e06-b1d1-7eb64bacedbe@ti.com>
Date: Wed, 14 Aug 2024 20:41:49 +0530
From: "Kumar, Udit" <u-kumar1@...com>
To: Beleswar Padhi <b-padhi@...com>, <nm@...com>, <vigneshr@...com>,
<kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>
CC: <tony@...mide.com>, <g-vlaev@...com>, <afd@...com>, <hnagalla@...com>,
<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/5] arm64: dts: ti: k3-j7200: Change timer nodes
status to reserved
On 8/14/2024 4:11 PM, Beleswar Padhi wrote:
> The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
There is no DSP on this SOC.
Please consider to re-word commit message
> use timers. Therefore, change the status of the timer nodes to
> "reserved" to avoid any clash. Usage is described as below:
>
> +===================+==========================+
> | Remoteproc node | Timer Node |
> +===================+==========================+
> | main_r5fss0_core0 | main_timer0, main_timer2 |
> +-------------------+--------------------------+
> | main_r5fss0_core1 | main_timer1 |
> +-------------------+--------------------------+
> This change is already incorporated for timer nodes in the MCU voltage
> domain.
For whole series, on MCU domain R5 we have device-manager firmware,
which is needed to get SOC functional. So MCU domain timers are reserved.
So my suggestion will be to avoid above message
>
> Fixes: c8a28ed4837c ("arm64: dts: ti: k3-j7200: Add general purpose timers")
> Signed-off-by: Beleswar Padhi <b-padhi@...com>
> ---
> .../boot/dts/ti/k3-j7200-common-proc-board.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 6593c5da82c0..a65066bd7f09 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -471,3 +471,16 @@ &main_mcan3 {
> pinctrl-0 = <&main_mcan3_pins_default>;
> phys = <&transceiver3>;
> };
> +
> +/* Timers are used by Remoteproc firmware */
> +&main_timer0 {
> + status = "reserved";
> +};
> +
> +&main_timer1 {
> + status = "reserved";
> +};
> +
> +&main_timer2 {
> + status = "reserved";
> +};
Powered by blists - more mailing lists