[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240814052228.4654-4-jasowang@redhat.com>
Date: Wed, 14 Aug 2024 13:22:27 +0800
From: Jason Wang <jasowang@...hat.com>
To: mst@...hat.com,
jasowang@...hat.com,
xuanzhuo@...ux.alibaba.com,
eperezma@...hat.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com
Cc: virtualization@...ts.linux.dev,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
venkat.x.venkatsubra@...cle.com,
gia-khanh.nguyen@...cle.com
Subject: [PATCH net-next v7 3/4] virtio-net: synchronize operstate with admin state on up/down
This patch synchronizes operstate with admin state per RFC2863.
This is done by trying to toggle the carrier upon open/close and
synchronize with the config change work. This allows to propagate
status correctly to stacked devices like:
ip link add link enp0s3 macvlan0 type macvlan
ip link set link enp0s3 down
ip link show
Before this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
......
5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
After this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
...
5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
Acked-by: Michael S. Tsirkin <mst@...hat.com>
Signed-off-by: Jason Wang <jasowang@...hat.com>
---
drivers/net/virtio_net.c | 78 +++++++++++++++++++++++++---------------
1 file changed, 50 insertions(+), 28 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 3f10c72743e9..55b712a71e63 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2885,6 +2885,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
net_dim_work_cancel(dim);
}
+static void virtnet_update_settings(struct virtnet_info *vi)
+{
+ u32 speed;
+ u8 duplex;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
+ return;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
+
+ if (ethtool_validate_speed(speed))
+ vi->speed = speed;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
+
+ if (ethtool_validate_duplex(duplex))
+ vi->duplex = duplex;
+}
+
static int virtnet_open(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -2903,6 +2922,15 @@ static int virtnet_open(struct net_device *dev)
goto err_enable_qp;
}
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+ if (vi->status & VIRTIO_NET_S_LINK_UP)
+ netif_carrier_on(vi->dev);
+ virtio_config_driver_enable(vi->vdev);
+ } else {
+ vi->status = VIRTIO_NET_S_LINK_UP;
+ netif_carrier_on(dev);
+ }
+
return 0;
err_enable_qp:
@@ -3381,12 +3409,22 @@ static int virtnet_close(struct net_device *dev)
disable_delayed_refill(vi);
/* Make sure refill_work doesn't re-enable napi! */
cancel_delayed_work_sync(&vi->refill);
+ /* Prevent the config change callback from changing carrier
+ * after close
+ */
+ virtio_config_driver_disable(vi->vdev);
+ /* Stop getting status/speed updates: we don't care until next
+ * open
+ */
+ cancel_work_sync(&vi->config_work);
for (i = 0; i < vi->max_queue_pairs; i++) {
virtnet_disable_queue_pair(vi, i);
virtnet_cancel_dim(vi, &vi->rq[i].dim);
}
+ netif_carrier_off(dev);
+
return 0;
}
@@ -5095,25 +5133,6 @@ static void virtnet_init_settings(struct net_device *dev)
vi->duplex = DUPLEX_UNKNOWN;
}
-static void virtnet_update_settings(struct virtnet_info *vi)
-{
- u32 speed;
- u8 duplex;
-
- if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
- return;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
-
- if (ethtool_validate_speed(speed))
- vi->speed = speed;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
-
- if (ethtool_validate_duplex(duplex))
- vi->duplex = duplex;
-}
-
static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
{
return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
@@ -6524,6 +6543,9 @@ static int virtnet_probe(struct virtio_device *vdev)
goto free_failover;
}
+ /* Disable config change notification until ndo_open. */
+ virtio_config_driver_disable(vi->vdev);
+
virtio_device_ready(vdev);
virtnet_set_queues(vi, vi->curr_queue_pairs);
@@ -6573,25 +6595,25 @@ static int virtnet_probe(struct virtio_device *vdev)
vi->device_stats_cap = le64_to_cpu(v);
}
- rtnl_unlock();
-
- err = virtnet_cpu_notif_add(vi);
- if (err) {
- pr_debug("virtio_net: registering cpu notifier failed\n");
- goto free_unregister_netdev;
- }
-
/* Assume link up if device can't report link status,
otherwise get link status from config. */
netif_carrier_off(dev);
if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
- schedule_work(&vi->config_work);
+ virtnet_config_changed_work(&vi->config_work);
} else {
vi->status = VIRTIO_NET_S_LINK_UP;
virtnet_update_settings(vi);
netif_carrier_on(dev);
}
+ rtnl_unlock();
+
+ err = virtnet_cpu_notif_add(vi);
+ if (err) {
+ pr_debug("virtio_net: registering cpu notifier failed\n");
+ goto free_unregister_netdev;
+ }
+
for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
if (virtio_has_feature(vi->vdev, guest_offloads[i]))
set_bit(guest_offloads[i], &vi->guest_offloads);
--
2.31.1
Powered by blists - more mailing lists