lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240814-setback-rumbling-c6393c8f1a91@spud>
Date: Wed, 14 Aug 2024 09:08:40 +0100
From: Conor Dooley <conor@...nel.org>
To: linux-pci@...r.kernel.org
Cc: conor@...nel.org,
	Conor Dooley <conor.dooley@...rochip.com>,
	Daire McNamara <daire.mcnamara@...rochip.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Rob Herring <robh@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-riscv@...ts.infradead.org
Subject: [PATCH v5 0/2] PCI: microchip: support using either instance 1 or 2

From: Conor Dooley <conor.dooley@...rochip.com>

The current driver and binding for PolarFire SoC's PCI controller assume
that the root port instance in use is instance 1. The second reg
property constitutes the region encompassing both "control" and "bridge"
registers for both instances. In the driver, a fixed offset is applied to
find the base addresses for instance 1's "control" and "bridge"
registers. The BeagleV Fire uses root port instance 2, so something must
be done so that software can differentiate. This series splits the
second reg property in two, with dedicated "control" and "bridge"
entries so that either instance can be used.

Cheers,
Conor.

v5:
- rebase on top of 6.11-rc1, which brought about a lot of driver change
  due to the plda common driver creation - although little actually
  changed in terms of the lines edited in this patch.

v4:
- fix a cocci warning reported off list about an inconsistent variable
  used between IS_ERR() and PTR_ERR() calls.

v3:
- rename a variable in probe s/axi/apb/

v2:
- try the new reg format before the old one to avoid warnings in the
  good case
- reword $subject for 2/2

CC: Daire McNamara <daire.mcnamara@...rochip.com>
CC: Lorenzo Pieralisi <lpieralisi@...nel.org>
CC: Krzysztof Wilczyński <kw@...ux.com>
CC: Rob Herring <robh@...nel.org>
CC: Bjorn Helgaas <bhelgaas@...gle.com>
CC: Krzysztof Kozlowski <krzk+dt@...nel.org>
CC: Conor Dooley <conor+dt@...nel.org>
CC: linux-pci@...r.kernel.org
CC: devicetree@...r.kernel.org
CC: linux-kernel@...r.kernel.org
CC: linux-riscv@...ts.infradead.org

Conor Dooley (2):
  dt-bindings: PCI: microchip,pcie-host: fix reg properties
  PCI: microchip: rework reg region handing to support using either
    instance 1 or 2

 .../bindings/pci/microchip,pcie-host.yaml     |  11 +-
 .../pci/plda,xpressrich3-axi-common.yaml      |  14 ++-
 .../bindings/pci/starfive,jh7110-pcie.yaml    |   7 ++
 .../pci/controller/plda/pcie-microchip-host.c | 116 +++++++++---------
 4 files changed, 87 insertions(+), 61 deletions(-)

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ