lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240814104151.2038457-2-b-padhi@ti.com>
Date: Wed, 14 Aug 2024 16:11:47 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
        <krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <u-kumar1@...com>, <tony@...mide.com>, <g-vlaev@...com>, <afd@...com>,
        <hnagalla@...com>, <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 1/5] arm64: dts: ti: k3-j7200: Change timer nodes status to reserved

The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:

	+===================+==========================+
	|  Remoteproc node  |        Timer Node        |
	+===================+==========================+
	| main_r5fss0_core0 | main_timer0, main_timer2 |
	+-------------------+--------------------------+
	| main_r5fss0_core1 | main_timer1              |
	+-------------------+--------------------------+

This change is already incorporated for timer nodes in the MCU voltage
domain.

Fixes: c8a28ed4837c ("arm64: dts: ti: k3-j7200: Add general purpose timers")
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts      | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 6593c5da82c0..a65066bd7f09 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -471,3 +471,16 @@ &main_mcan3 {
 	pinctrl-0 = <&main_mcan3_pins_default>;
 	phys = <&transceiver3>;
 };
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ