Message-ID: <4b745c1a-33d9-472a-97af-153a2a7c8721@linaro.org>
Date: Wed, 14 Aug 2024 14:13:49 +0300
From: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
To: Depeng Shao <quic_depengs@...cinc.com>, rfoss@...nel.org,
 todor.too@...il.com, bryan.odonoghue@...aro.org, mchehab@...nel.org,
 robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org
Cc: linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 kernel@...cinc.com, Yongsheng Li <quic_yon@...cinc.com>
Subject: Re: [PATCH 13/13] media: qcom: camss: Add support for VFE hardware
 version Titan 780

Hi Depeng,

please find a few review comments, all asked changes are non-functional.

On 8/12/24 17:41, Depeng Shao wrote:
> Add support for VFE found on SM8550 (Titan 780). This implementation is
> based on the titan 480 implementation. It supports the normal and lite
> VFE.
> 
> Co-developed-by: Yongsheng Li <quic_yon@...cinc.com>
> Signed-off-by: Yongsheng Li <quic_yon@...cinc.com>
> Signed-off-by: Depeng Shao <quic_depengs@...cinc.com>
> ---
>   drivers/media/platform/qcom/camss/Makefile    |   1 +
>   .../media/platform/qcom/camss/camss-vfe-780.c | 148 ++++++++++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe.c |  33 ++--
>   drivers/media/platform/qcom/camss/camss-vfe.h |   1 +
>   drivers/media/platform/qcom/camss/camss.c     | 132 ++++++++++++++++
>   drivers/media/platform/qcom/camss/camss.h     |   2 +
>   6 files changed, 304 insertions(+), 13 deletions(-)
>   create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c
> 
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index c336e4c1a399..a83b7a8dcef7 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -17,6 +17,7 @@ qcom-camss-objs += \
>   		camss-vfe-4-8.o \
>   		camss-vfe-17x.o \
>   		camss-vfe-480.o \
> +		camss-vfe-780.o \
>   		camss-vfe-gen1.o \
>   		camss-vfe.o \
>   		camss-video.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c
> new file mode 100644
> index 000000000000..e1c4d25cdc40
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * camss-vfe-780.c

I understand that a file name copied from a previous file and updated,
let's just remove it, it serves no purpose, but adds this unnecessary
work on every next copy.

> + *
> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v780 (SM8550)
> + *
> + * Copyright (c) 2024 Qualcomm Technologies, Inc.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +
> +#include "camss.h"
> +#include "camss-vfe.h"
> +
> +#define BUS_REG_BASE			(vfe_is_lite(vfe) ? 0x200 : 0xC00)
> +
> +#define VFE_BUS_WM_CGC_OVERRIDE		(BUS_REG_BASE + 0x08)
> +#define		WM_CGC_OVERRIDE_ALL		(0x7FFFFFF)
> +
> +#define VFE_BUS_WM_TEST_BUS_CTRL	(BUS_REG_BASE + 0xDC)
> +
> +#define VFE_BUS_WM_CFG(n)		(BUS_REG_BASE + 0x200 + (n) * 0x100)
> +#define		WM_CFG_EN			BIT(0)
> +#define		WM_VIR_FRM_EN			BIT(1)
> +#define		WM_CFG_MODE			BIT(16)
> +#define VFE_BUS_WM_IMAGE_ADDR(n)	(BUS_REG_BASE + 0x204 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAME_INCR(n)	(BUS_REG_BASE + 0x208 + (n) * 0x100)
> +#define VFE_BUS_WM_IMAGE_CFG_0(n)	(BUS_REG_BASE + 0x20c + (n) * 0x100)
> +#define		WM_IMAGE_CFG_0_DEFAULT_WIDTH	(0xFFFF)
> +#define VFE_BUS_WM_IMAGE_CFG_1(n)	(BUS_REG_BASE + 0x210 + (n) * 0x100)
> +#define VFE_BUS_WM_IMAGE_CFG_2(n)	(BUS_REG_BASE + 0x214 + (n) * 0x100)
> +#define		WM_IMAGE_CFG_2_DEFAULT_STRIDE	(0xFFFF)
> +#define VFE_BUS_WM_PACKER_CFG(n)	(BUS_REG_BASE + 0x218 + (n) * 0x100)
> +#define VFE_BUS_WM_HEADER_ADDR(n)	(BUS_REG_BASE + 0x220 + (n) * 0x100)
> +#define VFE_BUS_WM_HEADER_INCR(n)	(BUS_REG_BASE + 0x224 + (n) * 0x100)
> +#define VFE_BUS_WM_HEADER_CFG(n)	(BUS_REG_BASE + 0x228 + (n) * 0x100)

Three VFE_BUS_WM_HEADER_* macra above are not used, please remove.

> +
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)	(BUS_REG_BASE + 0x230 + (n) * 0x100)
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)	(BUS_REG_BASE + 0x234 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)		(BUS_REG_BASE + 0x238 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)		(BUS_REG_BASE + 0x23c + (n) * 0x100)
> +
> +#define VFE_BUS_WM_MMU_PREFETCH_CFG(n)		(BUS_REG_BASE + 0x260 + (n) * 0x100)
> +#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n)	(BUS_REG_BASE + 0x264 + (n) * 0x100)
> +#define VFE_BUS_WM_SYSTEM_CACHE_CFG(n)		(BUS_REG_BASE + 0x268 + (n) * 0x100)

Good to know that there is such a register, but it's not used,
please remove the macro.

> +
> +/* for titan 780, each bus client is hardcoded to a specific path */
> +#define RDI_WM(n)			((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
> +
> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
> +{
> +	struct v4l2_pix_format_mplane *pix =
> +		&line->video_out.active_fmt.fmt.pix_mp;
> +
> +	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */

Please move the comment on its own line.

> +
> +	/* no clock gating at bus input */
> +	writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
> +
> +	writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
> +
> +	writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
> +	       vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
> +	writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
> +	       vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
> +	writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
> +	       vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
> +	writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
> +
> +	/* no dropped frames, one irq per frame */
> +	writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
> +	writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
> +	writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
> +	writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
> +
> +	writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
> +	writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
> +
> +	writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
> +{
> +	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */

Please move the comment on its own line or remove it as obvious one.

> +	writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
> +			  struct vfe_line *line)
> +{
> +	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */

Please move the comment on its own line or remove it as obvious one.

> +	writel((addr >> 8) & 0xFFFFFFFF, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
> +
> +	dev_dbg(vfe->camss->dev, "%s wm:%d, image buf addr:0x%x\n",
> +		__func__, wm, addr);

There will be no confusion in runtime about a source of the debug
message, please remove that __func__ information.

> +}
> +
> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
> +{
> +	int port_id = line_id;
> +
> +	/* RUP(register update) registers has beem moved to CSID in Titan 780.

Huh, it's unusual to see a network subsystem style comment formatting here.

There is a typo, s/beem/been/

> +	 * Notify the event of trigger RUP.
> +	 */

I suppose it would be good enough to remove the comment completely as
an obvious one.

> +	camss_reg_update(vfe->camss, vfe->id, port_id, false);
> +}
> +
> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
> +					enum vfe_line_id line_id)
> +{
> +	int port_id = line_id;
> +
> +	/* RUP(register update) registers has beem moved to CSID in Titan 780.
> +	 * Notify the event of trigger RUP clear.
> +	 */

Same as above.

> +	camss_reg_update(vfe->camss, vfe->id, port_id, true);
> +}
> +
> +static const struct camss_video_ops vfe_video_ops_780 = {
> +	.queue_buffer = vfe_queue_buffer_v2,
> +	.flush_buffers = vfe_flush_buffers,
> +};
> +
> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
> +{
> +	vfe->video_ops = vfe_video_ops_780;
> +}
> +
> +const struct vfe_hw_ops vfe_ops_780 = {
> +	.enable_irq = NULL,
> +	.global_reset = NULL,
> +	.hw_version = vfe_hw_version,
> +	.isr = NULL,
> +	.pm_domain_off = vfe_pm_domain_off,
> +	.pm_domain_on = vfe_pm_domain_on,
> +	.subdev_init = vfe_subdev_init,
> +	.vfe_disable = vfe_disable,
> +	.vfe_enable = vfe_enable_v2,
> +	.vfe_halt = NULL,
> +	.vfe_wm_start = vfe_wm_start,
> +	.vfe_wm_stop = vfe_wm_stop,
> +	.vfe_buf_done = vfe_buf_done,
> +	.vfe_wm_update = vfe_wm_update,
> +	.reg_update = vfe_reg_update,
> +	.reg_update_clear = vfe_reg_update_clear,
> +};
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 71bd55e854bb..507fc7785ac8 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -343,6 +343,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>   	case CAMSS_845:
>   	case CAMSS_8250:
>   	case CAMSS_8280XP:
> +	case CAMSS_8550:
>   		switch (sink_code) {
>   		case MEDIA_BUS_FMT_YUYV8_1X16:
>   		{
> @@ -674,15 +675,17 @@ int vfe_reset(struct vfe_device *vfe)
>   {
>   	unsigned long time;
>   
> -	reinit_completion(&vfe->reset_complete);
> +	if (vfe->res->hw_ops->global_reset) {
> +		reinit_completion(&vfe->reset_complete);
>   
> -	vfe->res->hw_ops->global_reset(vfe);
> +		vfe->res->hw_ops->global_reset(vfe);
>   
> -	time = wait_for_completion_timeout(&vfe->reset_complete,
> -		msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
> -	if (!time) {
> -		dev_err(vfe->camss->dev, "VFE reset timeout\n");
> -		return -EIO;
> +		time = wait_for_completion_timeout(&vfe->reset_complete,
> +			msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
> +		if (!time) {
> +			dev_err(vfe->camss->dev, "VFE reset timeout\n");
> +			return -EIO;
> +		}

This goes to some other preceding change, since it's unrelated to Titan 780
support, but the latter depends on it.

>   	}
>   
>   	return 0;
> @@ -1120,7 +1123,8 @@ void vfe_put(struct vfe_device *vfe)
>   	} else if (vfe->power_count == 1) {
>   		if (vfe->was_streaming) {
>   			vfe->was_streaming = 0;
> -			vfe->res->hw_ops->vfe_halt(vfe);
> +			if (vfe->res->hw_ops->vfe_halt)
> +				vfe->res->hw_ops->vfe_halt(vfe);

This goes to some other change, since it's unrelated to Titan 780 support.

>   		}
>   		camss_disable_clocks(vfe->nclocks, vfe->clock);
>   		pm_runtime_put_sync(vfe->camss->dev);
> @@ -1807,11 +1811,13 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>   	vfe->irq = ret;
>   	snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
>   		 dev_name(dev), MSM_VFE_NAME, id);
> -	ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
> -			       IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
> -	if (ret < 0) {
> -		dev_err(dev, "request_irq failed: %d\n", ret);
> -		return ret;
> +	if (vfe->res->hw_ops->isr) {
> +		ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
> +				       IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
> +		if (ret < 0) {
> +			dev_err(dev, "request_irq failed: %d\n", ret);
> +			return ret;
> +		}

This change shall be done in a seperate preceding commit, since it's
unrelated to Titan 780 support.

>   	}
>   
>   	/* Clocks */
> @@ -1963,6 +1969,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
>   	case CAMSS_845:
>   	case CAMSS_8250:
>   	case CAMSS_8280XP:
> +	case CAMSS_8550:
>   		ret = 16;
>   		break;
>   	default:
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
> index fcbf4f609129..9dec5bc0d1b1 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
> @@ -243,6 +243,7 @@ extern const struct vfe_hw_ops vfe_ops_4_7;
>   extern const struct vfe_hw_ops vfe_ops_4_8;
>   extern const struct vfe_hw_ops vfe_ops_170;
>   extern const struct vfe_hw_ops vfe_ops_480;
> +extern const struct vfe_hw_ops vfe_ops_780;
>   
>   int vfe_get(struct vfe_device *vfe);
>   void vfe_put(struct vfe_device *vfe);
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 7ee102948dc4..92a0fa02e415 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -1666,6 +1666,125 @@ static const struct camss_subdev_resources csid_res_8550[] = {
>   	}
>   };
>   
> +static const struct camss_subdev_resources vfe_res_8550[] = {
> +	/* VFE0 */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe0_fast_ahb",
> +			   "vfe0", "cpas_vfe0", "camnoc_axi" },
> +		.clock_rate = { { 0, 0, 0, 0, 0 },
> +				{ 0, 0, 0, 0, 80000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
> +		.reg = { "vfe0" },
> +		.interrupt = { "vfe0" },
> +		.vfe = {
> +			.line_num = 3,
> +			.is_lite = false,
> +			.has_pd = true,
> +			.pd_name = "ife0",
> +			.hw_ops = &vfe_ops_780,
> +			.formats_rdi = &vfe_formats_rdi_845,
> +			.formats_pix = &vfe_formats_pix_845
> +		}
> +	},
> +	/* VFE1 */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe1_fast_ahb",
> +			   "vfe1", "cpas_vfe1", "camnoc_axi" },
> +		.clock_rate = {	{ 0, 0, 0, 0, 0 },
> +				{ 0, 0, 0, 0, 80000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
> +		.reg = { "vfe1" },
> +		.interrupt = { "vfe1" },
> +		.vfe = {
> +			.line_num = 3,
> +			.is_lite = false,
> +			.has_pd = true,
> +			.pd_name = "ife1",
> +			.hw_ops = &vfe_ops_780,
> +			.formats_rdi = &vfe_formats_rdi_845,
> +			.formats_pix = &vfe_formats_pix_845
> +		}
> +	},
> +	/* VFE2 */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe2_fast_ahb",
> +			   "vfe2", "cpas_vfe2", "camnoc_axi" },
> +		.clock_rate = {	{ 0, 0, 0, 0, 0 },
> +				{ 0, 0, 0, 0, 80000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
> +		.reg = { "vfe2" },
> +		.interrupt = { "vfe2" },
> +		.vfe = {
> +			.line_num = 3,
> +			.is_lite = false,
> +			.has_pd = true,
> +			.pd_name = "ife2",
> +			.hw_ops = &vfe_ops_780,
> +			.formats_rdi = &vfe_formats_rdi_845,
> +			.formats_pix = &vfe_formats_pix_845
> +		}
> +	},
> +	/* VFE3 lite */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
> +			   "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
> +		.clock_rate = {	{ 0, 0, 0, 0, 0 },
> +				{ 0, 0, 0, 0, 80000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 400000000, 480000000, 480000000, 480000000, 480000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
> +		.reg = { "vfe_lite0" },
> +		.interrupt = { "vfe_lite0" },
> +		.vfe = {
> +			.line_num = 4,
> +			.is_lite = true,
> +			.hw_ops = &vfe_ops_780,
> +			.formats_rdi = &vfe_formats_rdi_845,
> +			.formats_pix = &vfe_formats_pix_845
> +		}
> +	},
> +	/* VFE4 lite */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
> +			   "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
> +		.clock_rate = {	{ 0, 0, 0, 0, 0 },
> +				{ 0, 0, 0, 0, 80000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 400000000, 480000000, 480000000, 480000000, 480000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
> +				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
> +		.reg = { "vfe_lite1" },
> +		.interrupt = { "vfe_lite1" },
> +		.vfe = {
> +			.line_num = 4,
> +			.is_lite = true,
> +			.hw_ops = &vfe_ops_780,
> +			.formats_rdi = &vfe_formats_rdi_845,
> +			.formats_pix = &vfe_formats_pix_845
> +		}
> +	},
> +};
> +
>   static const struct resources_icc icc_res_sm8550[] = {
>   	{
>   		.name = "ahb",
> @@ -1846,6 +1965,17 @@ void camss_pm_domain_off(struct camss *camss, int id)
>   	}
>   }
>   
> +void camss_reg_update(struct camss *camss, int hw_id, int port_id, bool is_clear)

Please let it be just a declarative 'clear' instead of questioning 'is_clear'.

> +{
> +	struct csid_device *csid;
> +
> +	if (hw_id < camss->res->csid_num) {
> +		csid = &(camss->csid[hw_id]);
> +
> +		csid->res->hw_ops->reg_update(csid, port_id, is_clear);
> +	}
> +}
> +

Please add the new exported function camss_reg_update() in a separate
preceding commit.

>   void camss_buf_done(struct camss *camss, int hw_id, int port_id)
>   {
>   	struct vfe_device *vfe;
> @@ -2668,10 +2798,12 @@ static const struct camss_resources sm8550_resources = {
>   	.pd_name = "top",
>   	.csiphy_res = csiphy_res_8550,
>   	.csid_res = csid_res_8550,
> +	.vfe_res = vfe_res_8550,
>   	.icc_res = icc_res_sm8550,
>   	.icc_path_num = ARRAY_SIZE(icc_res_sm8550),
>   	.csiphy_num = ARRAY_SIZE(csiphy_res_8550),
>   	.csid_num = ARRAY_SIZE(csid_res_8550),
> +	.vfe_num = ARRAY_SIZE(vfe_res_8550),
>   	.link_entities = camss_link_entities
>   };
>   
> diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
> index d6b6558a82b9..697846e70e78 100644
> --- a/drivers/media/platform/qcom/camss/camss.h
> +++ b/drivers/media/platform/qcom/camss/camss.h
> @@ -157,5 +157,7 @@ int camss_vfe_get(struct camss *camss, int id);
>   void camss_vfe_put(struct camss *camss, int id);
>   void camss_delete(struct camss *camss);
>   void camss_buf_done(struct camss *camss, int hw_id, int port_id);
> +void camss_reg_update(struct camss *camss, int hw_id,
> +		      int port_id, bool is_clear);
>   
>   #endif /* QC_MSM_CAMSS_H */

Thank you for the efforts to get support of Titan 780 in the upstream.

--
Best wishes,
Vladimir

Powered by blists - more mailing lists