lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240815-ambush-cavalier-80adf0260765@thorsis.com>
Date: Thu, 15 Aug 2024 09:57:56 +0200
From: Alexander Dahl <ada@...rsis.com>
To: Andrei Simion <andrei.simion@...rochip.com>
Cc: claudiu.beznea@...on.dev, nicolas.ferre@...rochip.com,
	alexandre.belloni@...tlin.com, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, peda@...ntia.se,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, cristian.birsan@...rochip.com,
	linux-leds@...r.kernel.org
Subject: Re: [PATCH 5/5] ARM: dts: microchip: Rename LED sub nodes name

Hello Andrei,

Am Wed, Aug 14, 2024 at 03:26:33PM +0300 schrieb Andrei Simion:
> dtbs_check warnings:
> leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes:
> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
> leds: 'red', 'green', 'blue' do not match any of regexes:
> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
> 
> Rename the led sub nodes according to devicetree
> specification and leds-gpio.yaml.
> 
> Signed-off-by: Andrei Simion <andrei.simion@...rochip.com>
> ---
> Split the bloadted patch into small patches on topics
> based on comments:
> https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@tuxon.dev/
> ---
>  arch/arm/boot/dts/microchip/aks-cdu.dts        | 8 ++++----
>  arch/arm/boot/dts/microchip/animeo_ip.dts      | 8 ++++----
>  arch/arm/boot/dts/microchip/at91-sam9x60ek.dts | 6 +++---
>  arch/arm/boot/dts/microchip/at91rm9200ek.dts   | 6 +++---
>  arch/arm/boot/dts/microchip/at91sam9260ek.dts  | 4 ++--
>  arch/arm/boot/dts/microchip/at91sam9261ek.dts  | 6 +++---
>  arch/arm/boot/dts/microchip/at91sam9263ek.dts  | 4 ++--
>  arch/arm/boot/dts/microchip/at91sam9g20ek.dts  | 4 ++--
>  8 files changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
> index 52e166c8a365..95a0639c5579 100644
> --- a/arch/arm/boot/dts/microchip/aks-cdu.dts
> +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
> @@ -98,23 +98,23 @@ rootfs@...000 {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		red {
> +		led-red {
>  			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "none";
>  		};
>  
> -		green {
> +		led-green {
>  			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "none";
>  			default-state = "on";
>  		};
>  
> -		yellow {
> +		led-yellow {
>  			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "none";
>  		};
>  
> -		blue {
> +		led-blue {
>  			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "none";
>  		};

As reported with <20240730-rambling-helping-2f03f5ddee6a@...rsis.com>
already, this will probably change sysfs paths and thus might break
userspace depending on those paths.  Did you consider adding a label
to avoid this?

(Added linux-leds to Cc.)

Greets
Alex

> diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
> index 911c8d9ee013..52ac840bcd35 100644
> --- a/arch/arm/boot/dts/microchip/animeo_ip.dts
> +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
> @@ -146,23 +146,23 @@ ohci: usb@...000 {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		power_green {
> +		led-power-green {
>  			label = "power_green";
>  			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		power_red {
> +		led-power-red {
>  			label = "power_red";
>  			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
>  		};
>  
> -		tx_green {
> +		led-tx-green {
>  			label = "tx_green";
>  			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
>  		};
>  
> -		tx_red {
> +		led-tx-red {
>  			label = "tx_red";
>  			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
>  		};
> diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
> index b9a21f9f9a6d..da31b07d6828 100644
> --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
> @@ -53,17 +53,17 @@ leds {
>  		pinctrl-0 = <&pinctrl_gpio_leds>;
>  		status = "okay"; /* Conflict with pwm0. */
>  
> -		red {
> +		led-red {
>  			label = "red";
>  			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
>  		};
>  
> -		green {
> +		led-green {
>  			label = "green";
>  			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
>  		};
>  
> -		blue {
> +		led-blue {
>  			label = "blue";
>  			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
> diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
> index 3089912dd6be..641d443e6ca9 100644
> --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
> @@ -127,19 +127,19 @@ root@...000  {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		ds2 {
> +		led-ds2 {
>  			label = "green";
>  			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "mmc0";
>  		};
>  
> -		ds4 {
> +		led-ds4 {
>  			label = "yellow";
>  			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		ds6 {
> +		led-ds6 {
>  			label = "red";
>  			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
>  		};
> diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
> index ed259e2cb853..4933971d0585 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
> @@ -174,13 +174,13 @@ eeprom@50 {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		ds1 {
> +		led-ds1 {
>  			label = "ds1";
>  			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		ds5 {
> +		led-ds5 {
>  			label = "ds5";
>  			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>  		};
> diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
> index 4d9269cc5f32..9c44177db714 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
> @@ -192,19 +192,19 @@ watchdog@...ffd40 {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		ds8 {
> +		led-ds8 {
>  			label = "ds8";
>  			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "none";
>  		};
>  
> -		ds7 {
> +		led-ds7 {
>  			label = "ds7";
>  			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "nand-disk";
>  		};
>  
> -		ds1 {
> +		led-ds1 {
>  			label = "ds1";
>  			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "heartbeat";
> diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
> index a8ea36db4c04..cf5434f9449d 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
> @@ -219,13 +219,13 @@ &pioA 21 GPIO_ACTIVE_HIGH
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		d3 {
> +		led-d3 {
>  			label = "d3";
>  			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		d2 {
> +		led-d2 {
>  			label = "d2";
>  			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
>  			linux,default-trigger = "nand-disk";
> diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
> index 6de7a7cd3c07..1e62fd371ddb 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
> @@ -14,13 +14,13 @@ / {
>  	leds {
>  		compatible = "gpio-leds";
>  
> -		ds1 {
> +		led-ds1 {
>  			label = "ds1";
>  			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
> -		ds5 {
> +		led-ds5 {
>  			label = "ds5";
>  			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>  		};
> -- 
> 2.34.1
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ