[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240816175034.769628-2-virag.david003@gmail.com>
Date: Fri, 16 Aug 2024 19:50:31 +0200
From: David Virag <virag.david003@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>
Cc: David Virag <virag.david003@...il.com>,
linux-samsung-soc@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/2] clk: samsung: clk-pll: Add support for pll_1418x
pll1418x is used in Exynos7885 SoC for USB PHY clock.
Operation-wise it is very similar to pll0822x, except that MDIV is only
9 bits wide instead of 10, and we use the CON1 register in the PLL
macro's "con" parameter instead of CON3 like this:
PLL(pll_1418x, CLK_FOUT_USB_PLL, "fout_usb_pll", "oscclk",
PLL_LOCKTIME_PLL_USB, PLL_CON0_PLL_USB,
pll_usb_rate_table),
Technically the PLL should work fine with pll0822x code if the PLL
tables are correct, but it's more "correct" to actually update the mask.
Signed-off-by: David Virag <virag.david003@...il.com>
---
Changes in v2:
- None
Changes in v3:
- Simplify set_rate part
drivers/clk/samsung/clk-pll.c | 18 +++++++++++++++---
drivers/clk/samsung/clk-pll.h | 1 +
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 4be879ab917e..4307cd534ee6 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -430,6 +430,9 @@ static const struct clk_ops samsung_pll36xx_clk_min_ops = {
#define PLL0822X_LOCK_STAT_SHIFT (29)
#define PLL0822X_ENABLE_SHIFT (31)
+/* PLL1418x is similar to PLL0822x, except that MDIV is one bit smaller */
+#define PLL1418X_MDIV_MASK (0x1FF)
+
static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -438,7 +441,10 @@ static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
u64 fvco = parent_rate;
pll_con3 = readl_relaxed(pll->con_reg);
- mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
+ if (pll->type != pll_1418x)
+ mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
+ else
+ mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL1418X_MDIV_MASK;
pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK;
sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK;
@@ -456,7 +462,12 @@ static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
{
const struct samsung_pll_rate_table *rate;
struct samsung_clk_pll *pll = to_clk_pll(hw);
- u32 pll_con3;
+ u32 mdiv_mask, pll_con3;
+
+ if (pll->type != pll_1418x)
+ mdiv_mask = PLL0822X_MDIV_MASK;
+ else
+ mdiv_mask = PLL1418X_MDIV_MASK;
/* Get required rate settings from table */
rate = samsung_get_pll_settings(pll, drate);
@@ -468,7 +479,7 @@ static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
/* Change PLL PMS values */
pll_con3 = readl_relaxed(pll->con_reg);
- pll_con3 &= ~((PLL0822X_MDIV_MASK << PLL0822X_MDIV_SHIFT) |
+ pll_con3 &= ~((mdiv_mask << PLL0822X_MDIV_SHIFT) |
(PLL0822X_PDIV_MASK << PLL0822X_PDIV_SHIFT) |
(PLL0822X_SDIV_MASK << PLL0822X_SDIV_SHIFT));
pll_con3 |= (rate->mdiv << PLL0822X_MDIV_SHIFT) |
@@ -1317,6 +1328,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
init.ops = &samsung_pll35xx_clk_ops;
break;
case pll_1417x:
+ case pll_1418x:
case pll_0818x:
case pll_0822x:
case pll_0516x:
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index ffd3d52c0dec..1efbe4c446d0 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -30,6 +30,7 @@ enum samsung_pll_type {
pll_2650x,
pll_2650xx,
pll_1417x,
+ pll_1418x,
pll_1450x,
pll_1451x,
pll_1452x,
--
2.46.0
Powered by blists - more mailing lists