| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240816183756.59250-1-guillaume.lefevre.crime@netc.fr>
Date: Fri, 16 Aug 2024 20:37:32 +0200
From: Guillaume Lefèvre-Crimé <guillaume.lefevre.crime@...c.fr>
To: gregkh@...uxfoundation.org
Cc: linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org,
guillaume.lefevre.crime@...c.fr
Subject: [PATCH] staging: rtl8723bs: add spaces arround operators
Adhere to Linux kernel coding style.
Reported by checkpath :
CHECK: spaces preferred around that '&' (ctx:VxV)
Signed-off-by: Guillaume Lefèvre-Crimé <guillaume.lefevre.crime@...c.fr>
---
drivers/staging/rtl8723bs/core/rtw_efuse.c | 54 +++++++++++-----------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_efuse.c b/drivers/staging/rtl8723bs/core/rtw_efuse.c
index eb848f9bbf2c..89acb6f290cc 100644
--- a/drivers/staging/rtl8723bs/core/rtw_efuse.c
+++ b/drivers/staging/rtl8723bs/core/rtw_efuse.c
@@ -38,7 +38,7 @@ Efuse_Read1ByteFromFakeContent(u16 Offset, u8 *Value)
if (fakeEfuseBank == 0)
*Value = fakeEfuseContent[Offset];
else
- *Value = fakeBTEfuseContent[fakeEfuseBank-1][Offset];
+ *Value = fakeBTEfuseContent[fakeEfuseBank - 1][Offset];
return true;
}
@@ -50,7 +50,7 @@ Efuse_Write1ByteToFakeContent(u16 Offset, u8 Value)
if (fakeEfuseBank == 0)
fakeEfuseContent[Offset] = Value;
else
- fakeBTEfuseContent[fakeEfuseBank-1][Offset] = Value;
+ fakeBTEfuseContent[fakeEfuseBank - 1][Offset] = Value;
return true;
}
@@ -206,21 +206,21 @@ u16 Address)
if (Address < contentLen) {/* E-fuse 512Byte */
/* Write E-fuse Register address bit0~7 */
temp = Address & 0xFF;
- rtw_write8(Adapter, EFUSE_CTRL+1, temp);
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);
+ rtw_write8(Adapter, EFUSE_CTRL + 1, temp);
+ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 2);
/* Write E-fuse Register address bit8~9 */
temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
- rtw_write8(Adapter, EFUSE_CTRL+2, temp);
+ rtw_write8(Adapter, EFUSE_CTRL + 2, temp);
/* Write 0x30[31]= 0 */
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
temp = Bytetemp & 0x7F;
- rtw_write8(Adapter, EFUSE_CTRL+3, temp);
+ rtw_write8(Adapter, EFUSE_CTRL + 3, temp);
/* Wait Write-ready (0x30[31]= 1) */
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
while (!(Bytetemp & 0x80)) {
- Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
k++;
if (k == 1000)
break;
@@ -253,16 +253,16 @@ bool bPseudoTest)
/* -----------------e-fuse reg ctrl --------------------------------- */
/* address */
- rtw_write8(padapter, EFUSE_CTRL+1, (u8)(addr&0xff));
- rtw_write8(padapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) |
- (rtw_read8(padapter, EFUSE_CTRL+2)&0xFC));
+ rtw_write8(padapter, EFUSE_CTRL + 1, (u8)(addr & 0xff));
+ rtw_write8(padapter, EFUSE_CTRL + 2, ((u8)((addr >> 8) & 0x03)) |
+ (rtw_read8(padapter, EFUSE_CTRL + 2) & 0xFC));
/* rtw_write8(padapter, EFUSE_CTRL+3, 0x72); read cmd */
/* Write bit 32 0 */
- readbyte = rtw_read8(padapter, EFUSE_CTRL+3);
- rtw_write8(padapter, EFUSE_CTRL+3, (readbyte & 0x7f));
+ readbyte = rtw_read8(padapter, EFUSE_CTRL + 3);
+ rtw_write8(padapter, EFUSE_CTRL + 3, (readbyte & 0x7f));
- while (!(0x80 & rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 1000)) {
+ while (!(0x80 & rtw_read8(padapter, EFUSE_CTRL + 3)) && (tmpidx < 1000)) {
mdelay(1);
tmpidx++;
}
@@ -293,9 +293,9 @@ u8 efuse_OneByteWrite(struct adapter *padapter, u16 addr, u8 data, bool bPseudoT
efuseValue = rtw_read32(padapter, EFUSE_CTRL);
- efuseValue |= (BIT21|BIT31);
+ efuseValue |= (BIT21 | BIT31);
efuseValue &= ~(0x3FFFF);
- efuseValue |= ((addr<<8 | data) & 0x3FFFF);
+ efuseValue |= ((addr << 8 | data) & 0x3FFFF);
/* <20130227, Kordan> 8192E MP chip A-cut had better not set 0x34[11] until B-Cut. */
@@ -304,9 +304,9 @@ u8 efuse_OneByteWrite(struct adapter *padapter, u16 addr, u8 data, bool bPseudoT
/* 0x34[11]: SW force PGMEN input of efuse to high. (for the bank selected by 0x34[9:8]) */
/* PHY_SetMacReg(padapter, 0x34, BIT11, 1); */
rtw_write16(padapter, 0x34, rtw_read16(padapter, 0x34) | (BIT11));
- rtw_write32(padapter, EFUSE_CTRL, 0x90600000|((addr<<8 | data)));
+ rtw_write32(padapter, EFUSE_CTRL, 0x90600000 | ((addr << 8 | data)));
- while ((0x80 & rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 100)) {
+ while ((0x80 & rtw_read8(padapter, EFUSE_CTRL + 3)) && (tmpidx < 100)) {
mdelay(1);
tmpidx++;
}
@@ -365,19 +365,19 @@ efuse_WordEnableDataRead(u8 word_en,
u8 *sourdata,
u8 *targetdata)
{
- if (!(word_en&BIT(0))) {
+ if (!(word_en & BIT(0))) {
targetdata[0] = sourdata[0];
targetdata[1] = sourdata[1];
}
- if (!(word_en&BIT(1))) {
+ if (!(word_en & BIT(1))) {
targetdata[2] = sourdata[2];
targetdata[3] = sourdata[3];
}
- if (!(word_en&BIT(2))) {
+ if (!(word_en & BIT(2))) {
targetdata[4] = sourdata[4];
targetdata[5] = sourdata[5];
}
- if (!(word_en&BIT(3))) {
+ if (!(word_en & BIT(3))) {
targetdata[6] = sourdata[6];
targetdata[7] = sourdata[7];
}
@@ -463,7 +463,7 @@ static void efuse_ShadowRead2Byte(struct adapter *padapter, u16 Offset, u16 *Val
struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
*Value = pEEPROM->efuse_eeprom_data[Offset];
- *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
+ *Value |= pEEPROM->efuse_eeprom_data[Offset + 1] << 8;
} /* EFUSE_ShadowRead2Byte */
@@ -473,9 +473,9 @@ static void efuse_ShadowRead4Byte(struct adapter *padapter, u16 Offset, u32 *Val
struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
*Value = pEEPROM->efuse_eeprom_data[Offset];
- *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
- *Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16;
- *Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24;
+ *Value |= pEEPROM->efuse_eeprom_data[Offset + 1] << 8;
+ *Value |= pEEPROM->efuse_eeprom_data[Offset + 2] << 16;
+ *Value |= pEEPROM->efuse_eeprom_data[Offset + 3] << 24;
} /* efuse_ShadowRead4Byte */
--
2.46.0
Powered by blists - more mailing lists