| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1ce9afe3-6f24-4471-8a10-5f4ea503e685@intel.com>
Date: Fri, 16 Aug 2024 14:45:47 -0700
From: Dave Jiang <dave.jiang@...el.com>
To: ira.weiny@...el.com, Fan Ni <fan.ni@...sung.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Navneet Singh <navneet.singh@...el.com>, Chris Mason <clm@...com>,
Josef Bacik <josef@...icpanda.com>, David Sterba <dsterba@...e.com>,
Petr Mladek <pmladek@...e.com>, Steven Rostedt <rostedt@...dmis.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Sergey Senozhatsky <senozhatsky@...omium.org>,
Jonathan Corbet <corbet@....net>, Andrew Morton <akpm@...ux-foundation.org>
Cc: Dan Williams <dan.j.williams@...el.com>,
Davidlohr Bueso <dave@...olabs.net>,
Alison Schofield <alison.schofield@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>, linux-btrfs@...r.kernel.org,
linux-cxl@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, nvdimm@...ts.linux.dev,
"Li, Ming" <ming4.li@...el.com>
Subject: Re: [PATCH v3 06/25] cxl/mem: Read dynamic capacity configuration
from the device
On 8/16/24 7:44 AM, ira.weiny@...el.com wrote:
> From: Navneet Singh <navneet.singh@...el.com>
>
> Devices which optionally support Dynamic Capacity (DC) are configured
> via mailbox commands. CXL 3.1 requires the host to issue the Get DC
> Configuration command in order to properly configure DCDs. Without the
> Get DC Configuration command DCD can't be supported.
>
> Implement the DC mailbox commands as specified in CXL 3.1 section
> 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration
> information. Disable DCD if DCD is not supported. Leverage the Get DC
> Configuration command supported bit to indicate if DCD support.
>
> Linux has no use for the trailing fields of the Get Dynamic Capacity
> Configuration Output Payload (Total number of supported extents, number
> of available extents, total number of supported tags, and number of
> available tags). Avoid defining those fields to use the more useful
> dynamic C array.
>
> Cc: "Li, Ming" <ming4.li@...el.com>
> Signed-off-by: Navneet Singh <navneet.singh@...el.com>
> Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
>
> ---
> Changes:
> [Li, Ming: Fix bug in total_bytes calculation]
> [iweiny: update commit message]
> [Jonathan: fix formatting]
> [Jonathan: Define block line size]
> [Jonathan/Fan: use regions returned field instead of macro in get config]
> [Jørgen: Rename memdev state range variables]
> [Jonathan: adjust use of rc in cxl_dev_dynamic_capacity_identify()]
> [Jonathan: white space cleanup]
> [fan: make a comment about the trailing configuration output fields]
> ---
> drivers/cxl/core/mbox.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/cxl/cxlmem.h | 64 +++++++++++++++++-
> drivers/cxl/pci.c | 4 ++
> 3 files changed, 237 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 8eb196858abe..68c26c4be91a 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -1157,7 +1157,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds)
> if (rc < 0)
> return rc;
>
> - mds->total_bytes =
> + mds->static_bytes =
> le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER;
> mds->volatile_only_bytes =
> le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER;
> @@ -1264,6 +1264,159 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)
> return rc;
> }
>
> +static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index,
> + struct cxl_dc_region_config *region_config)
> +{
> + struct cxl_dc_region_info *dcr = &mds->dc_region[index];
> + struct device *dev = mds->cxlds.dev;
> +
> + dcr->base = le64_to_cpu(region_config->region_base);
> + dcr->decode_len = le64_to_cpu(region_config->region_decode_length);
> + dcr->decode_len *= CXL_CAPACITY_MULTIPLIER;
> + dcr->len = le64_to_cpu(region_config->region_length);
> + dcr->blk_size = le64_to_cpu(region_config->region_block_size);
> + dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle);
> + dcr->flags = region_config->flags;
> + snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index);
> +
> + /* Check regions are in increasing DPA order */
> + if (index > 0) {
> + struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1];
> +
> + if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) {
> + dev_err(dev,
> + "DPA ordering violation for DC region %d and %d\n",
> + index - 1, index);
> + return -EINVAL;
> + }
> + }
> +
> + if (!IS_ALIGNED(dcr->base, SZ_256M) ||
> + !IS_ALIGNED(dcr->base, dcr->blk_size)) {
> + dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n",
> + index, dcr->base, dcr->blk_size);
> + return -EINVAL;
> + }
> +
> + if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len ||
> + !IS_ALIGNED(dcr->len, dcr->blk_size)) {
> + dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n",
> + index, dcr->decode_len, dcr->len, dcr->blk_size);
> + return -EINVAL;
> + }
> +
> + if (dcr->blk_size == 0 || dcr->blk_size % CXL_DCD_BLOCK_LINE_SIZE ||
> + !is_power_of_2(dcr->blk_size)) {
> + dev_err(dev, "DC region %d invalid block size; %#llx\n",
> + index, dcr->blk_size);
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev,
> + "DC region %s base %#llx length %#llx block size %#llx\n",
> + dcr->name, dcr->base, dcr->decode_len, dcr->blk_size);
> +
> + return 0;
> +}
> +
> +/* Returns the number of regions in dc_resp or -ERRNO */
> +static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region,
> + struct cxl_mbox_get_dc_config_out *dc_resp,
> + size_t dc_resp_size)
> +{
> + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) {
> + .region_count = CXL_MAX_DC_REGION,
> + .start_region_index = start_region,
> + };
> + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_DC_CONFIG,
> + .payload_in = &get_dc,
> + .size_in = sizeof(get_dc),
> + .size_out = dc_resp_size,
> + .payload_out = dc_resp,
> + .min_out = 1,
> + };
> + struct device *dev = mds->cxlds.dev;
> + int rc;
> +
> + rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + dev_dbg(dev, "Read %d/%d DC regions\n",
> + dc_resp->regions_returned, dc_resp->avail_region_count);
> + return dc_resp->regions_returned;
> +}
> +
> +/**
> + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity
> + * information from the device.
> + * @mds: The memory device state
> + *
> + * Read Dynamic Capacity information from the device and populate the state
> + * structures for later use.
> + *
> + * Return: 0 if identify was executed successfully, -ERRNO on error.
> + */
> +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds)
> +{
> + size_t dc_resp_size = mds->payload_size;
> + struct device *dev = mds->cxlds.dev;
> + u8 start_region, i;
> +
> + for (i = 0; i < CXL_MAX_DC_REGION; i++)
> + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>");
> +
> + if (!cxl_dcd_supported(mds)) {
> + dev_dbg(dev, "DCD not supported\n");
> + return 0;
> + }
This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible?
> +
> + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) =
> + kvmalloc(dc_resp_size, GFP_KERNEL);
> + if (!dc_resp)
> + return -ENOMEM;
> +
> + start_region = 0;
> + do {
> + int rc, j;
> +
> + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size);
> + if (rc < 0) {
> + dev_dbg(dev, "Failed to get DC config: %d\n", rc);
> + return rc;
> + }
> +
> + mds->nr_dc_region += rc;
> +
> + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) {
> + dev_err(dev, "Invalid num of dynamic capacity regions %d\n",
> + mds->nr_dc_region);
> + return -EINVAL;
> + }
> +
> + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) {
This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'.
> + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]);
> + if (rc) {
> + dev_dbg(dev, "Failed to save region info: %d\n", rc);
> + return rc;
> + }
> + }
> +
> + start_region = mds->nr_dc_region;
> +
> + } while (mds->nr_dc_region < dc_resp->avail_region_count);
> +
> + mds->dynamic_bytes =
> + mds->dc_region[mds->nr_dc_region - 1].base +
> + mds->dc_region[mds->nr_dc_region - 1].decode_len -
> + mds->dc_region[0].base;
> + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL);
> +
> static int add_dpa_res(struct device *dev, struct resource *parent,
> struct resource *res, resource_size_t start,
> resource_size_t size, const char *type)
> @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
> {
> struct cxl_dev_state *cxlds = &mds->cxlds;
> struct device *dev = cxlds->dev;
> + size_t untenanted_mem;
> int rc;
>
> + mds->total_bytes = mds->static_bytes;
> + if (mds->nr_dc_region) {
> + untenanted_mem = mds->dc_region[0].base - mds->static_bytes;
> + mds->total_bytes += untenanted_mem + mds->dynamic_bytes;
> + }
> +
> if (!cxlds->media_ready) {
> cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
> cxlds->ram_res = DEFINE_RES_MEM(0, 0);
> @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
>
> cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes);
>
> + for (int i = 0; i < mds->nr_dc_region; i++) {
> + struct cxl_dc_region_info *dcr = &mds->dc_region[i];
> +
> + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i],
> + dcr->base, dcr->decode_len, dcr->name);
> + if (rc)
> + return rc;
> + }
> +
> if (mds->partition_align_bytes == 0) {
> rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
> mds->volatile_only_bytes, "ram");
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index f2f8b567e0e7..b4eb8164d05d 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -402,6 +402,7 @@ enum cxl_devtype {
> CXL_DEVTYPE_CLASSMEM,
> };
>
> +#define CXL_MAX_DC_REGION 8
> /**
> * struct cxl_dpa_perf - DPA performance property entry
> * @dpa_range: range for DPA address
> @@ -431,6 +432,8 @@ struct cxl_dpa_perf {
> * @dpa_res: Overall DPA resource tree for the device
> * @pmem_res: Active Persistent memory capacity configuration
> * @ram_res: Active Volatile memory capacity configuration
> + * @dc_res: Active Dynamic Capacity memory configuration for each possible
> + * region
> * @serial: PCIe Device Serial Number
> * @type: Generic Memory Class device or Vendor Specific Memory device
> */
> @@ -445,10 +448,22 @@ struct cxl_dev_state {
> struct resource dpa_res;
> struct resource pmem_res;
> struct resource ram_res;
> + struct resource dc_res[CXL_MAX_DC_REGION];
> u64 serial;
> enum cxl_devtype type;
> };
>
> +#define CXL_DC_REGION_STRLEN > +struct cxl_dc_region_info {
> + u64 base;
> + u64 decode_len;
> + u64 len;
> + u64 blk_size;
> + u32 dsmad_handle;
> + u8 flags;
> + u8 name[CXL_DC_REGION_STRLEN];
> +};
Does this need kdoc comments?
> +
> /**
> * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data
> *
> @@ -466,7 +481,9 @@ struct cxl_dev_state {
> * @dcd_cmds: List of DCD commands implemented by memory device
> * @enabled_cmds: Hardware commands found enabled in CEL.
> * @exclusive_cmds: Commands that are kernel-internal only
> - * @total_bytes: sum of all possible capacities
> + * @total_bytes: length of all possible capacities
> + * @static_bytes: length of possible static RAM and PMEM partitions
> + * @dynamic_bytes: length of possible DC partitions (DC Regions)
Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'?
> * @volatile_only_bytes: hard volatile capacity
> * @persistent_only_bytes: hard persistent capacity
> * @partition_align_bytes: alignment size for partition-able capacity
> @@ -476,6 +493,8 @@ struct cxl_dev_state {
> * @next_persistent_bytes: persistent capacity change pending device reset
> * @ram_perf: performance data entry matched to RAM partition
> * @pmem_perf: performance data entry matched to PMEM partition
> + * @nr_dc_region: number of DC regions implemented in the memory device
> + * @dc_region: array containing info about the DC regions
Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'?
DJ
> * @event: event log driver state
> * @poison: poison driver state info
> * @security: security driver state info
> @@ -496,6 +515,8 @@ struct cxl_memdev_state {
> DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
> DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
> u64 total_bytes;
> + u64 static_bytes;
> + u64 dynamic_bytes;
> u64 volatile_only_bytes;
> u64 persistent_only_bytes;
> u64 partition_align_bytes;
> @@ -507,6 +528,9 @@ struct cxl_memdev_state {
> struct cxl_dpa_perf ram_perf;
> struct cxl_dpa_perf pmem_perf;
>
> + u8 nr_dc_region;
> + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION];
> +
> struct cxl_event_state event;
> struct cxl_poison_state poison;
> struct cxl_security_state security;
> @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info {
>
> #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0)
>
> +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */
> +struct cxl_mbox_get_dc_config_in {
> + u8 region_count;
> + u8 start_region_index;
> +} __packed;
> +
> +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */
> +struct cxl_mbox_get_dc_config_out {
> + u8 avail_region_count;
> + u8 regions_returned;
> + u8 rsvd[6];
> + /* See CXL 3.1 Table 8-165 */
> + struct cxl_dc_region_config {
> + __le64 region_base;
> + __le64 region_decode_length;
> + __le64 region_length;
> + __le64 region_block_size;
> + __le32 region_dsmad_handle;
> + u8 flags;
> + u8 rsvd[3];
> + } __packed region[];
> + /* Trailing fields unused */
> +} __packed;
> +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0)
> +#define CXL_DCD_BLOCK_LINE_SIZE 0x40
> +
> /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */
> struct cxl_mbox_set_timestamp_in {
> __le64 timestamp;
> @@ -832,6 +882,7 @@ enum {
> int cxl_internal_send_cmd(struct cxl_memdev_state *mds,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds);
> int cxl_await_media_ready(struct cxl_dev_state *cxlds);
> int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
> int cxl_mem_create_range_info(struct cxl_memdev_state *mds);
> @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd,
> enum cxl_event_log_type type,
> enum cxl_event_type event_type,
> const uuid_t *uuid, union cxl_event *evt);
> +
> +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds)
> +{
> + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
> +}
> +
> +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds)
> +{
> + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
> +}
> +
> int cxl_set_timestamp(struct cxl_memdev_state *mds);
> int cxl_poison_state_init(struct cxl_memdev_state *mds);
> int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 3a60cd66263e..f7f03599bc83 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> if (rc)
> return rc;
>
> + rc = cxl_dev_dynamic_capacity_identify(mds);
> + if (rc)
> + cxl_disable_dcd(mds);
> +
> rc = cxl_mem_create_range_info(mds);
> if (rc)
> return rc;
>
Powered by blists - more mailing lists