[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240816215555.GA2302157-robh@kernel.org>
Date: Fri, 16 Aug 2024 15:55:55 -0600
From: Rob Herring <robh@...nel.org>
To: Frank Li <Frank.Li@....com>
Cc: Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
"open list:HARDWARE MONITORING" <linux-hwmon@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev
Subject: Re: [PATCH 1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to
yaml
On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote:
> Convert binding doc ltc2978.txt to yaml format.
> Additional change:
> - add i2c node.
> - basic it is regulator according to example, move it under regulator.
>
> Fix below warning:
> arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@...0000/i2c-mux@...i2c@...egulator@5c:
> failed to match any schema with compatible: ['lltc,ltc3882']
>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------
> .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++
> 2 files changed, 94 insertions(+), 62 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
I'm on the fence whether to move this...
> diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> deleted file mode 100644
> index 4e7f6215a4533..0000000000000
> --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -ltc2978
> -
> -Required properties:
> -- compatible: should contain one of:
> - * "lltc,ltc2972"
> - * "lltc,ltc2974"
> - * "lltc,ltc2975"
> - * "lltc,ltc2977"
> - * "lltc,ltc2978"
> - * "lltc,ltc2979"
> - * "lltc,ltc2980"
> - * "lltc,ltc3880"
> - * "lltc,ltc3882"
> - * "lltc,ltc3883"
> - * "lltc,ltc3884"
> - * "lltc,ltc3886"
> - * "lltc,ltc3887"
> - * "lltc,ltc3889"
> - * "lltc,ltc7880"
> - * "lltc,ltm2987"
> - * "lltc,ltm4664"
> - * "lltc,ltm4675"
> - * "lltc,ltm4676"
> - * "lltc,ltm4677"
> - * "lltc,ltm4678"
> - * "lltc,ltm4680"
> - * "lltc,ltm4686"
> - * "lltc,ltm4700"
> -- reg: I2C slave address
> -
> -Optional properties:
> -- regulators: A node that houses a sub-node for each regulator controlled by
> - the device. Each sub-node is identified using the node's name, with valid
> - values listed below. The content of each sub-node is defined by the
> - standard binding for regulators; see regulator.txt.
> -
> -Valid names of regulators depend on number of supplies supported per device:
> - * ltc2972 vout0 - vout1
> - * ltc2974, ltc2975 : vout0 - vout3
> - * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
> - * ltc2978 : vout0 - vout7
> - * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
> - * ltc7880 : vout0 - vout1
> - * ltc3883 : vout0
> - * ltm4664 : vout0 - vout1
> - * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
> - * ltm4680, ltm4686 : vout0 - vout1
> - * ltm4700 : vout0 - vout1
> -
> -Example:
> -ltc2978@5e {
> - compatible = "lltc,ltc2978";
> - reg = <0x5e>;
> - regulators {
> - vout0 {
> - regulator-name = "FPGA-2.5V";
> - };
> - vout2 {
> - regulator-name = "FPGA-1.5V";
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
> new file mode 100644
> index 0000000000000..20ae6152a2572
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/lltc,ltc2972.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ltc2978
I know the original was bad, but we can do better here.
> +
> +maintainers:
> + - Jean Delvare <jdelvare@...e.com>
> +
> +properties:
> + compatible:
> + enum:
> + - lltc,ltc2972
> + - lltc,ltc2974
> + - lltc,ltc2975
> + - lltc,ltc2977
> + - lltc,ltc2978
> + - lltc,ltc2979
> + - lltc,ltc2980
> + - lltc,ltc3880
> + - lltc,ltc3882
> + - lltc,ltc3883
> + - lltc,ltc3884
> + - lltc,ltc3886
> + - lltc,ltc3887
> + - lltc,ltc3889
> + - lltc,ltc7880
> + - lltc,ltm2987
> + - lltc,ltm4664
> + - lltc,ltm4675
> + - lltc,ltm4676
> + - lltc,ltm4677
> + - lltc,ltm4678
> + - lltc,ltm4680
> + - lltc,ltm4686
> + - lltc,ltm4700
> +
> + reg:
> + maxItems: 1
> +
> + regulators:
> + type: object
> + description: |
> + list of regulators provided by this controller.
> + Valid names of regulators depend on number of supplies supported per device:
> + * ltc2972 vout0 - vout1
> + * ltc2974, ltc2975 : vout0 - vout3
> + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
> + * ltc2978 : vout0 - vout7
> + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
> + * ltc7880 : vout0 - vout1
> + * ltc3883 : vout0
> + * ltm4664 : vout0 - vout1
> + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
> + * ltm4680, ltm4686 : vout0 - vout1
> + * ltm4700 : vout0 - vout1
> +
> + patternProperties:
> + "^vout[0-7]$":
> + $ref: regulator.yaml#
> + type: object
> + unevaluatedProperties: false
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + regulator@5e {
> + compatible = "lltc,ltc2978";
> + reg = <0x5e>;
> +
> + regulators {
> + vout0 {
> + regulator-name = "FPGA-2.5V";
> + };
> + vout2 {
> + regulator-name = "FPGA-1.5V";
> + };
> + };
> + };
> + };
> +
> --
> 2.34.1
>
Powered by blists - more mailing lists