| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <07f637e3-5539-4bbd-bc0f-e2b1d131640d@intel.com>
Date: Fri, 16 Aug 2024 16:17:00 -0700
From: Dave Jiang <dave.jiang@...el.com>
To: ira.weiny@...el.com, Fan Ni <fan.ni@...sung.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Navneet Singh <navneet.singh@...el.com>, Chris Mason <clm@...com>,
Josef Bacik <josef@...icpanda.com>, David Sterba <dsterba@...e.com>,
Petr Mladek <pmladek@...e.com>, Steven Rostedt <rostedt@...dmis.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Sergey Senozhatsky <senozhatsky@...omium.org>,
Jonathan Corbet <corbet@....net>, Andrew Morton <akpm@...ux-foundation.org>
Cc: Dan Williams <dan.j.williams@...el.com>,
Davidlohr Bueso <dave@...olabs.net>,
Alison Schofield <alison.schofield@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>, linux-btrfs@...r.kernel.org,
linux-cxl@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, nvdimm@...ts.linux.dev
Subject: Re: [PATCH v3 10/25] cxl/port: Add endpoint decoder DC mode support
to sysfs
On 8/16/24 7:44 AM, ira.weiny@...el.com wrote:
> From: Navneet Singh <navneet.singh@...el.com>
>
> Endpoint decoder mode is used to represent the partition the decoder
> points to such as ram or pmem.
>
> Expand the mode to allow a decoder to point to a specific DC partition
> (Region).
>
> Signed-off-by: Navneet Singh <navneet.singh@...el.com>
> Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
Reviewed-by: Dave Jiang <dave.jiang@...el.com>
>
> ---
> Changes:
> [Fan: change mode range logic]
> [Fan: use !resource_size()]
> [djiang: use the static mode name string array in mode_store()]
> [Jonathan: remove rc check from mode to region index]
> [Jonathan: clarify decoder mode 'mixed']
> [djbw: drop cleanup patch and just follow the convention in cxl_dpa_set_mode()]
> [fan: make dcd resource size check similar to other partitions]
> [djbw, jonathan, fan: remove mode range check from dc_mode_to_region_index]
> [iweiny: push sysfs versions to 6.12]
> ---
> Documentation/ABI/testing/sysfs-bus-cxl | 21 ++++++++++----------
> drivers/cxl/core/hdm.c | 10 ++++++++++
> drivers/cxl/core/port.c | 10 +++++-----
> drivers/cxl/cxl.h | 35 ++++++++++++++++++---------------
> 4 files changed, 45 insertions(+), 31 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
> index 3f5627a1210a..957717264709 100644
> --- a/Documentation/ABI/testing/sysfs-bus-cxl
> +++ b/Documentation/ABI/testing/sysfs-bus-cxl
> @@ -316,23 +316,24 @@ Description:
>
>
> What: /sys/bus/cxl/devices/decoderX.Y/mode
> -Date: May, 2022
> -KernelVersion: v6.0
> +Date: May, 2022, October 2024
> +KernelVersion: v6.0, v6.12 (dcY)
> Contact: linux-cxl@...r.kernel.org
> Description:
> (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
> translates from a host physical address range, to a device local
> address range. Device-local address ranges are further split
> - into a 'ram' (volatile memory) range and 'pmem' (persistent
> - memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
> - 'mixed', or 'none'. The 'mixed' indication is for error cases
> - when a decoder straddles the volatile/persistent partition
> - boundary, and 'none' indicates the decoder is not actively
> - decoding, or no DPA allocation policy has been set.
> + into a 'ram' (volatile memory) range, 'pmem' (persistent
> + memory) range, or Dynamic Capacity (DC) range. The 'mode'
> + attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or
> + 'none'. The 'mixed' indication is for error cases when a
> + decoder straddles partition boundaries, and 'none' indicates
> + the decoder is not actively decoding, or no DPA allocation
> + policy has been set.
>
> 'mode' can be written, when the decoder is in the 'disabled'
> - state, with either 'ram' or 'pmem' to set the boundaries for the
> - next allocation.
> + state, with 'ram', 'pmem', or 'dcY' to set the boundaries for
> + the next allocation.
>
>
> What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index b4a517c6d283..ceca0b3d3e5c 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -551,6 +551,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
> switch (mode) {
> case CXL_DECODER_RAM:
> case CXL_DECODER_PMEM:
> + case CXL_DECODER_DC0 ... CXL_DECODER_DC7:
> break;
> default:
> dev_dbg(dev, "unsupported mode: %d\n", mode);
> @@ -578,6 +579,15 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
> goto out;
> }
>
> + if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) {
> + rc = dc_mode_to_region_index(mode);
> + if (!resource_size(&cxlds->dc_res[rc])) {
> + dev_dbg(dev, "no available dynamic capacity\n");
> + rc = -ENXIO;
> + goto out;
> + }
> + }
> +
> cxled->mode = mode;
> rc = 0;
> out:
> diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> index 8054cbaac9f6..222aa0aeeef7 100644
> --- a/drivers/cxl/core/port.c
> +++ b/drivers/cxl/core/port.c
> @@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
> enum cxl_decoder_mode mode;
> ssize_t rc;
>
> - if (sysfs_streq(buf, "pmem"))
> - mode = CXL_DECODER_PMEM;
> - else if (sysfs_streq(buf, "ram"))
> - mode = CXL_DECODER_RAM;
> - else
> + for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++)
> + if (sysfs_streq(buf, cxl_decoder_mode_names[mode]))
> + break;
> +
> + if (mode >= CXL_DECODER_MIXED)
> return -EINVAL;
>
> rc = cxl_dpa_set_mode(cxled, mode);
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 53b666ef4097..16861c867537 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -365,6 +365,9 @@ struct cxl_decoder {
> /*
> * CXL_DECODER_DEAD prevents endpoints from being reattached to regions
> * while cxld_unregister() is running
> + *
> + * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last.
> + * See mode_store()
> */
> enum cxl_decoder_mode {
> CXL_DECODER_NONE,
> @@ -382,25 +385,25 @@ enum cxl_decoder_mode {
> CXL_DECODER_DEAD,
> };
>
> +static const char * const cxl_decoder_mode_names[] = {
> + [CXL_DECODER_NONE] = "none",
> + [CXL_DECODER_RAM] = "ram",
> + [CXL_DECODER_PMEM] = "pmem",
> + [CXL_DECODER_DC0] = "dc0",
> + [CXL_DECODER_DC1] = "dc1",
> + [CXL_DECODER_DC2] = "dc2",
> + [CXL_DECODER_DC3] = "dc3",
> + [CXL_DECODER_DC4] = "dc4",
> + [CXL_DECODER_DC5] = "dc5",
> + [CXL_DECODER_DC6] = "dc6",
> + [CXL_DECODER_DC7] = "dc7",
> + [CXL_DECODER_MIXED] = "mixed",
> +};
> +
> static inline const char *cxl_decoder_mode_name(enum cxl_decoder_mode mode)
> {
> - static const char * const names[] = {
> - [CXL_DECODER_NONE] = "none",
> - [CXL_DECODER_RAM] = "ram",
> - [CXL_DECODER_PMEM] = "pmem",
> - [CXL_DECODER_DC0] = "dc0",
> - [CXL_DECODER_DC1] = "dc1",
> - [CXL_DECODER_DC2] = "dc2",
> - [CXL_DECODER_DC3] = "dc3",
> - [CXL_DECODER_DC4] = "dc4",
> - [CXL_DECODER_DC5] = "dc5",
> - [CXL_DECODER_DC6] = "dc6",
> - [CXL_DECODER_DC7] = "dc7",
> - [CXL_DECODER_MIXED] = "mixed",
> - };
> -
> if (mode >= CXL_DECODER_NONE && mode <= CXL_DECODER_MIXED)
> - return names[mode];
> + return cxl_decoder_mode_names[mode];
> return "mixed";
> }
>
>
Powered by blists - more mailing lists