lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240816065924.1094942-1-vtpieter@gmail.com>
Date: Fri, 16 Aug 2024 08:59:20 +0200
From: vtpieter@...il.com
To: Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Woojung Huh <woojung.huh@...rochip.com>,
	UNGLinuxDriver@...rochip.com,
	Russell King <linux@...linux.org.uk>
Cc: Pieter Van Trappen <pieter.van.trappen@...n.ch>,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [RFC] net: dsa: microchip: add KSZ8 change_tag_protocol support

From: Pieter Van Trappen <pieter.van.trappen@...n.ch>

Add support for changing the KSZ8 switches tag protocol. In fact
these devices can only enable or disable the tail tag, so there's
really only three supported protocols:
- DSA_TAG_PROTO_KSZ8795 for KSZ87xx
- DSA_TAG_PROTO_KSZ9893 for KSZ88x3
- DSA_TAG_PROTO_NONE

When disabled, this can be used as a workaround for the 'Common
pitfalls using DSA setups' [1] to use the conduit network interface as
a regular one, admittedly forgoing most DSA functionality and using
the device as an unmanaged switch whilst allowing control
operations (ethtool, PHY management, WoL). Implementing the new
software-defined DSA tagging protocol tag_8021q [2] for these devices
seems overkill for this use case at the time being.

Link: Documentation/networking/dsa/dsa.rst [1]
Link: https://lpc.events/event/11/contributions/949/attachments/823/1555/paper.pdf [2]
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@...n.ch>
---
 .../devicetree/bindings/net/dsa/dsa-port.yaml |  1 +
 drivers/net/dsa/microchip/ksz8.h              |  2 ++
 drivers/net/dsa/microchip/ksz8795.c           | 28 +++++++++++++++++++
 drivers/net/dsa/microchip/ksz_common.c        | 19 +++++++++++--
 drivers/net/dsa/microchip/ksz_common.h        |  2 ++
 5 files changed, 49 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index 480120469953..ded8019b6ba6 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -53,6 +53,7 @@ properties:
     enum:
       - dsa
       - edsa
+      - none
       - ocelot
       - ocelot-8021q
       - rtl8_4
diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index ae43077e76c3..802cb9d657bb 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -54,6 +54,8 @@ int ksz8_reset_switch(struct ksz_device *dev);
 int ksz8_switch_init(struct ksz_device *dev);
 void ksz8_switch_exit(struct ksz_device *dev);
 int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
+int ksz8_change_tag_protocol(struct ksz_device *dev,
+			     enum dsa_tag_protocol proto);
 void ksz8_phylink_mac_link_up(struct phylink_config *config,
 			      struct phy_device *phydev, unsigned int mode,
 			      phy_interface_t interface, int speed, int duplex,
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index d27b9c36d73f..0704d5404c5b 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -127,6 +127,34 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
 	return -EOPNOTSUPP;
 }
 
+/**
+ * ksz8_change_tag_protocol - Change tag protocol
+ * @dev: The device structure.
+ * @proto: The requested protocol.
+ *
+ * This function allows changing the tag protocol. In fact the ksz8
+ * devices can only enable or disable the tail tag, so there's really
+ * only 2 supported protocols.
+ *
+ * Return: 0 on success, -EPROTONOSUPPORT in case protocol not supported.
+ */
+int ksz8_change_tag_protocol(struct ksz_device *dev,
+			     enum dsa_tag_protocol proto)
+{
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+
+	if ( (proto == DSA_TAG_PROTO_KSZ8795 && ksz_is_ksz87xx(dev)) ||
+	     (proto == DSA_TAG_PROTO_KSZ9893 && ksz_is_ksz88x3(dev)) )
+		ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
+	else if (proto == DSA_TAG_PROTO_NONE)
+		ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], false);
+	else
+		return -EPROTONOSUPPORT;
+
+	return 0;
+}
+
 static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues)
 {
 	u8 mask_4q, mask_2q;
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 1491099528be..a87f43908a9a 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -307,6 +307,7 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.init = ksz8_switch_init,
 	.exit = ksz8_switch_exit,
 	.change_mtu = ksz8_change_mtu,
+	.change_tag_protocol = ksz8_change_tag_protocol,
 };
 
 static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
@@ -2893,9 +2894,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
 	struct ksz_device *dev = ds->priv;
 	enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE;
 
-	if (dev->chip_id == KSZ8795_CHIP_ID ||
-	    dev->chip_id == KSZ8794_CHIP_ID ||
-	    dev->chip_id == KSZ8765_CHIP_ID)
+	if (ksz_is_ksz87xx(dev))
 		proto = DSA_TAG_PROTO_KSZ8795;
 
 	if (dev->chip_id == KSZ8830_CHIP_ID ||
@@ -2917,12 +2916,25 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
 	return proto;
 }
 
+static int ksz_change_tag_protocol(struct dsa_switch *ds,
+				   enum dsa_tag_protocol proto)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (dev->dev_ops->change_tag_protocol)
+		return dev->dev_ops->change_tag_protocol(dev, proto);
+	else
+		return -EPROTONOSUPPORT;
+}
+
 static int ksz_connect_tag_protocol(struct dsa_switch *ds,
 				    enum dsa_tag_protocol proto)
 {
 	struct ksz_tagger_data *tagger_data;
 
 	switch (proto) {
+	case DSA_TAG_PROTO_NONE:
+		return 0;
 	case DSA_TAG_PROTO_KSZ8795:
 		return 0;
 	case DSA_TAG_PROTO_KSZ9893:
@@ -3974,6 +3986,7 @@ static int ksz_hsr_leave(struct dsa_switch *ds, int port,
 
 static const struct dsa_switch_ops ksz_switch_ops = {
 	.get_tag_protocol	= ksz_get_tag_protocol,
+	.change_tag_protocol    = ksz_change_tag_protocol,
 	.connect_tag_protocol   = ksz_connect_tag_protocol,
 	.get_phy_flags		= ksz_get_phy_flags,
 	.setup			= ksz_setup,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 5f0a628b9849..badae22f4613 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -354,6 +354,8 @@ struct ksz_dev_ops {
 	void (*get_caps)(struct ksz_device *dev, int port,
 			 struct phylink_config *config);
 	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
+	int (*change_tag_protocol)(struct ksz_device *dev,
+				   enum dsa_tag_protocol proto);
 	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
 	void (*phylink_mac_link_up)(struct ksz_device *dev, int port,

base-commit: dd1bf9f9df156b43e5122f90d97ac3f59a1a5621
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ