lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240816071822.GO2331@thinkpad>
Date: Fri, 16 Aug 2024 12:48:22 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Jim Quinlan <james.quinlan@...adcom.com>
Cc: linux-pci@...r.kernel.org, Nicolas Saenz Julienne <nsaenz@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
	Cyril Brulebois <kibi@...ian.org>,
	Stanimir Varbanov <svarbanov@...e.de>,
	Krzysztof Kozlowski <krzk@...nel.org>,
	bcm-kernel-feedback-list@...adcom.com, jim2101024@...il.com,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
	open list <linux-kernel@...r.kernel.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@...ts.infradead.org>,
	Rob Herring <robh@...nel.org>
Subject: Re: [PATCH v6 00/13] PCI: brcnstb: Enable STB 7712 SOC

On Thu, Aug 15, 2024 at 06:57:13PM -0400, Jim Quinlan wrote:
> V6 Changes
>   o Commit "Refactor for chips with many regular inbound windows"
>     -- Use u8 for anything storing/counting # inbound windows (Stan)
>     -- s/set_bar/add_inbound_win/g (Manivannan)
>     -- Drop use of "inline" (Manivannan)
>     -- Change cpu_beg to cpu_start, same with pcie_beg. (Manivannan)
>     -- Used writel_relaxed() (Manivannan)
>   o Use swinit reset if available
>     -- Proper use of dev_err_probe() (Stan)
>   o Commit "Use common error handling code in brcm_pcie_probe()"
>     -- Rewrite commit msg in paragraph form (Manivannan)
>     -- Refactor error path at end of probe func (Manivannan)
>     -- Proper use of dev_err_probe() (Stan)
>   o New commit "dt-bindings: PCI: Change brcmstb maintainer and cleanup"
>     -- Break out maintainer change and small cleanup into a
>        separate commit (Krzysztof)
> 

Looks like you've missed adding the review tags...

- Mani

> V5 Changes:
>   o All commits: Use imperative voice in commit subjects/messages
>        (Manivannan)
>   o Commit "PCI: brcmstb: Enable 7712 SOCs"
>     -- Augment commit message to include PCIe details and revision.
>        (Manivannan)
>   o Commit "PCI: brcmstb: Change field name from 'type' to 'model'"
>     -- Instead of "model" use "soc_base" (Manivannan)
>   o Commit "PCI: brcmstb: Refactor for chips with many regular inbound BARs"
>     -- Get rid of the confusing "BAR" variable names and types and use
>        something like "inbound_win". (Manivannan)
>   o Commit "PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE..."
>     -- Mention in the commit message that this change is in preparation
>        for the 7712 SoC. (Manivannan)
>   o Commit: "PCI: brcmstb: Use swinit reset if available"
>     -- Change reset name "swinit" to "swinit_reset" (Manivannan)
>     -- Add 1us delay for reset (Manivannan)
>     -- Use dev_err_probe() (Multiple reviewers)
>   o Commit "PCI: brcmstb: Use bridge reset if available"
>     -- Change reset name "bridge" to "bridge_reset" (Manivannan)
>     -- The Reset API can take NULL so need need to test variable
>        before calling (Manivannan)
>     -- Added a call to bridge_sw_init_set() method in probe()
>        as some registers cannot be accessed w/o this. (JQ)
>   o Commit "PCI: brcmstb: Use common error handling code in ..."
>     -- Use more descriptive goto label (Manivannan)
>     -- Refactor error paths to be less encumbered (Manivannan)
>     -- Use dev_err_probe() (Multiple reviewers)
>   o Commits "dt-bindings: PCI: brcmstb: ..."
>     -- Specify the "resets" and "reset-names" in the same manner
>        as does qcom,ufs.yaml specifies "clocks" and
>        "clock-names" (Krzysztof)
>     -- Drop reset desccriptions as they were pretty content-free
>        anyhow. (Krzysztof)
> 
> V4 Changes:
>   o Commit "Check return value of all reset_control_xxx calls"
>     -- Blank line before "return" (Stan)
>   o Commit "Use common error handling code in brcmstb_probe()"
>     -- Drop the "Fixes" tag (Stan)
>   o Commit "dt-bindings: PCI ..."
>     -- Separate the main commit into two: cleanup and adding the
>        7712 SoC (Krzysztof)
>     -- Fold maintainer change commit into cleanup change (Krzysztof)
>     -- Use minItems/maxItems where appropriate (Krzysztof)
>     -- Consistent order of resets/reset-names in decl and usage
>        (Krzysztof)
> 
> V3 Changes:
>   o Commit "Enable 7712 SOCs"
>     -- Move "model" check from outside to inside func (Stan)
>   o Commit "Check return value of all reset_control_xxx calls"
>     -- Propagate errors up the chain instead of ignoring them (Stan)
>   o Commit "Refactor for chips with many regular inbound BARs"
>     -- Nine suggestions given, nine implemented (Stan)
>   o Commit "Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
>     -- Drop tab, add parens around macro params in expression (Stan)
>   o Commit "Use swinit reset if available"
>     -- Treat swinit the same as other reset controllers (Stan)
>        Stan suggested to use dev_err_probe() for getting resources
>        but I will defer that to future series (if that's okay).
>   o Commit "Get resource before we start asserting resets"
>     -- Squash this with previous commit (Stan)
>   o Commit "Use "clk_out" error path label"
>     -- Move clk_prepare_enable() after getting resouurces (Stan)
>     -- Change subject to "Use more common error handling code in
>        brcm_pcie_probe()" (Markus)
>     -- Use imperative commit description (Markus)
>     -- "Fixes:" tag added for missing error return. (Markus)
>   o Commit "dt-bindings: PCI ..."
>     -- Split off maintainer change in separate commit.
>     -- Tried to accomodate Krzysztof's requests, I'm not sure I
>        have succeeded.  Krzysztof, please see [1] below.
>   
>   [1] Wrt the YAML of brcmstb PCIe resets, here is what I am trying
>       to describe:
> 
>       CHIP       NUM_RESETS    NAMES
>       ====       ==========    =====
>       4908       1             perst
>       7216       1             rescal
>       7712       3             rescal, bridge, swinit
>       Others     0             -
> 
> 
> V2 Changes (note: four new commits):
>   o Commit "dt-bindings: PCI ..."
>     -- s/Adds/Add/, fix spelling error (Bjorn)
>     -- Order compatible strings alphabetically (Krzysztof)
>     -- Give definitions first then rules (Krzysztof)
>     -- Add reason for change in maintainer (Krzysztof)
>   o Commit "Use swinit reset if available"
>     -- no need for "else" clause (Philipp)
>     -- fix improper use of dev_err_probe() (Philipp) 
>   o Commit "Use "clk_out" error path label"
>     -- Improve commit message (Bjorn)
>   o Commit "PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
>     -- Improve commit subject line (Bjorn)
>   o Commit (NEW) -- Change field name from 'type' to 'model'
>     -- Added as requested (Stanimir)
>   o Commit (NEW) -- Check return value of all reset_control_xxx calls
>     -- Added as requested (Stanimir)
>   o Commit (NEW) "Get resource before we start asserting reset controllers"
>     -- Added as requested (Stanimir)
>   o Commit (NEW) -- "Remove two unused constants from driver"
> 
> 
> V1:
>   This submission is for the Broadcom STB 7712, sibling SOC of the RPi5 chip.
>   Stanimir has already submitted a patch "Add PCIe support for bcm2712" for
>   the RPi version of the SOC.  It is hoped that Stanimir will allow us to
>   submit this series first and subsequently rebase his patch(es).
> 
>   The largest commit, "Refactor for chips with many regular inbound BARs"
>   affects both the STB and RPi SOCs.  It allows for multiple inbound ranges
>   where previously only one was effectively used.  This feature will also
>   be present in future STB chips, as well as Broadcom's Cable Modem group.
> 
> Jim Quinlan (13):
>   dt-bindings: PCI: Change brcmstb maintainer and cleanup
>   dt-bindings: PCI: Use maxItems for reset controllers
>   dt-bindings: PCI: brcmstb: Add 7712 SoC description
>   PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
>   PCI: brcmstb: Use bridge reset if available
>   PCI: brcmstb: Use swinit reset if available
>   PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets
>     SoC-specific
>   PCI: brcmstb: Remove two unused constants from driver
>   PCI: brcmstb: Don't conflate the reset rescal with phy ctrl
>   PCI: brcmstb: Refactor for chips with many regular inbound windows
>   PCI: brcmstb: Check return value of all reset_control_xxx calls
>   PCI: brcmstb: Change field name from 'type' to 'soc_base'
>   PCI: brcmstb: Enable 7712 SOCs
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |  40 +-
>  drivers/pci/controller/pcie-brcmstb.c         | 513 +++++++++++++-----
>  2 files changed, 412 insertions(+), 141 deletions(-)
> 
> 
> base-commit: e724918b3786252b985b0c2764c16a57d1937707
> -- 
> 2.17.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ