[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240816085004.491494-3-victor.liu@nxp.com>
Date: Fri, 16 Aug 2024 16:50:04 +0800
From: Liu Ying <victor.liu@....com>
To: dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: neil.armstrong@...aro.org,
quic_jesszhan@...cinc.com,
maarten.lankhorst@...ux.intel.com,
mripard@...nel.org,
tzimmermann@...e.de,
airlied@...il.com,
daniel@...ll.ch,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
thierry.reding@...il.com,
sam@...nborg.org
Subject: [PATCH 2/2] drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panel
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
interface.
The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf
Signed-off-by: Liu Ying <victor.liu@....com>
---
drivers/gpu/drm/panel/panel-simple.c | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index bf40057c5cf3..89963df80917 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3478,6 +3478,39 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct display_timing ontat_kd50g21_40nt_a1_timing = {
+ .pixelclock = { 30000000, 30000000, 50000000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 1, 40, 255 },
+ .hback_porch = { 1, 40, 87 },
+ .hsync_len = { 1, 48, 87 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 1, 13, 255 },
+ .vback_porch = { 1, 29, 29 },
+ .vsync_len = { 3, 3, 31 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc ontat_kd50g21_40nt_a1 = {
+ .timings = &ontat_kd50g21_40nt_a1_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 108,
+ .height = 65,
+ },
+ .delay = {
+ .prepare = 147, /* 5 VSDs */
+ .enable = 147, /* 5 VSDs */
+ .disable = 88, /* 3 VSDs */
+ .unprepare = 117, /* 4 VSDs */
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
/*
* 800x480 CVT. The panel appears to be quite accepting, at least as far as
* pixel clocks, but this is the timing that was being used in the Adafruit
@@ -4837,6 +4870,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "olimex,lcd-olinuxino-43-ts",
.data = &olimex_lcd_olinuxino_43ts,
+ }, {
+ .compatible = "ontat,kd50g21-40nt-a1",
+ .data = &ontat_kd50g21_40nt_a1,
}, {
.compatible = "ontat,yx700wv03",
.data = &ontat_yx700wv03,
--
2.34.1
Powered by blists - more mailing lists