[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240816-smatch-clock-v2-1-c63105db07e8@chromium.org>
Date: Fri, 16 Aug 2024 12:31:59 +0000
From: Ricardo Ribalda <ribalda@...omium.org>
To: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Krzysztof HaĆasa <khalasa@...p.pl>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Kevin Hilman <khilman@...libre.com>, Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: Hans Verkuil <hverkuil-cisco@...all.nl>, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-staging@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
Ricardo Ribalda <ribalda@...omium.org>
Subject: [PATCH v2 1/6] media: ar0521: Refactor ar0521_power_off()
Factor out all the power off logic, except the clk_disable_unprepare(),
to a new function __ar0521_power_off().
This allows ar0521_power_on() to explicitly clean-out the clock during
the error-path.
The following smatch warning is fixed:
drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912.
Signed-off-by: Ricardo Ribalda <ribalda@...omium.org>
---
drivers/media/i2c/ar0521.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
index 09331cf95c62..56a724b4d47e 100644
--- a/drivers/media/i2c/ar0521.c
+++ b/drivers/media/i2c/ar0521.c
@@ -835,14 +835,12 @@ static const struct initial_reg {
be(0x0707)), /* 3F44: couple k factor 2 */
};
-static int ar0521_power_off(struct device *dev)
+static void __ar0521_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ar0521_dev *sensor = to_ar0521_dev(sd);
int i;
- clk_disable_unprepare(sensor->extclk);
-
if (sensor->reset_gpio)
gpiod_set_value(sensor->reset_gpio, 1); /* assert RESET signal */
@@ -850,6 +848,16 @@ static int ar0521_power_off(struct device *dev)
if (sensor->supplies[i])
regulator_disable(sensor->supplies[i]);
}
+}
+
+static int ar0521_power_off(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ar0521_dev *sensor = to_ar0521_dev(sd);
+
+ clk_disable_unprepare(sensor->extclk);
+ __ar0521_power_off(dev);
+
return 0;
}
@@ -908,7 +916,8 @@ static int ar0521_power_on(struct device *dev)
return 0;
off:
- ar0521_power_off(dev);
+ clk_disable_unprepare(sensor->extclk);
+ __ar0521_power_off(dev);
return ret;
}
--
2.46.0.184.g6999bdac58-goog
Powered by blists - more mailing lists