linux-kernel - [PATCH v3] iommu/arm-smmu-v3: Match Stall behaviour for S2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240816125901.3773388-1-smostafa@google.com>
Date: Fri, 16 Aug 2024 12:59:01 +0000
From: Mostafa Saleh <smostafa@...gle.com>
To: linux-kernel@...r.kernel.org, iommu@...ts.linux.dev, 
	linux-arm-kernel@...ts.infradead.org, will@...nel.org, robin.murphy@....com, 
	joro@...tes.org
Cc: jean-philippe@...aro.org, jgg@...pe.ca, nicolinc@...dia.com, 
	mshavit@...gle.com, Mostafa Saleh <smostafa@...gle.com>
Subject: [PATCH v3] iommu/arm-smmu-v3: Match Stall behaviour for S2

According to the spec (ARM IHI 0070 F.b), in
"5.5 Fault configuration (A, R, S bits)":
    A STE with stage 2 translation enabled and STE.S2S == 0 is
    considered ILLEGAL if SMMU_IDR0.STALL_MODEL == 0b10.

Also described in the pseudocode “SteIllegal()”
    if STE.Config == '11x' then
        [..]
        if eff_idr0_stall_model == '10' && STE.S2S == '0' then
            // stall_model forcing stall, but S2S == 0
            return TRUE;

Which means, S2S must be set when stall model is
"ARM_SMMU_FEAT_STALL_FORCE", but at the moment the driver ignores that.

Although, the driver can do the minimum and only set S2S for
“ARM_SMMU_FEAT_STALL_FORCE”, it is more consistent to match S1
behaviour, which also sets it for “ARM_SMMU_FEAT_STALL” if the
master has requested stalls.

Also, since S2 stalls are enabled now, report them to the IOMMU layer
and for VFIO devices it will fail anyway as VFIO doesn’t register an
iopf handler.

Signed-off-by: Mostafa Saleh <smostafa@...gle.com>

---
v3:
- Set S2S for s2 and not s1 domain
- Ignore ats check

v2:
- Fix index of the STE
- Fix conflict with ATS
- Squash the 2 patches and drop enable_nesting
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 5 +----
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 1 +
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index a31460f9f3d4..d8fe16901afb 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -1646,6 +1646,7 @@ void arm_smmu_make_s2_domain_ste(struct arm_smmu_ste *target,
 		STRTAB_STE_2_S2ENDI |
 #endif
 		STRTAB_STE_2_S2PTW |
+		(master->stall_enabled ? STRTAB_STE_2_S2S : 0) |
 		STRTAB_STE_2_S2R);
 
 	target->data[3] = cpu_to_le64(pgtbl_cfg->arm_lpae_s2_cfg.vttbr &
@@ -1739,10 +1740,6 @@ static int arm_smmu_handle_evt(struct arm_smmu_device *smmu, u64 *evt)
 		return -EOPNOTSUPP;
 	}
 
-	/* Stage-2 is always pinned at the moment */
-	if (evt[1] & EVTQ_1_S2)
-		return -EFAULT;
-
 	if (!(evt[1] & EVTQ_1_STALL))
 		return -EOPNOTSUPP;
 
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index 14bca41a981b..0dc7ad43c64c 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -267,6 +267,7 @@ struct arm_smmu_ste {
 #define STRTAB_STE_2_S2AA64		(1UL << 51)
 #define STRTAB_STE_2_S2ENDI		(1UL << 52)
 #define STRTAB_STE_2_S2PTW		(1UL << 54)
+#define STRTAB_STE_2_S2S		(1UL << 57)
 #define STRTAB_STE_2_S2R		(1UL << 58)
 
 #define STRTAB_STE_3_S2TTB_MASK		GENMASK_ULL(51, 4)
-- 
2.46.0.184.g6999bdac58-goog