[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240816132058.920870-1-christian.bruel@foss.st.com>
Date: Fri, 16 Aug 2024 15:20:52 +0200
From: Christian Bruel <christian.bruel@...s.st.com>
To: <vkoul@...nel.org>, <kishon@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<mcoquelin.stm32@...il.com>, <alexandre.torgue@...s.st.com>,
<p.zabel@...gutronix.de>
CC: <linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<fabrice.gasnier@...s.st.com>,
Christian Bruel <christian.bruel@...s.st.com>
Subject: [PATCH v2 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
Thanks Rob for your comments, addressed in v2.
This patch series adds USB3/PCIE COMBOPHY driver for the STM32MP25 SoC from
STMicrolectronics, respective yaml schema and enable for the stm32mp257f-ev1
device into which it is used for PCIe.
Changes in v2:
- Reorder entries
- Rename clock_names and reset_names bindings
- Rename and clarify rx-equalizer binding
Christian Bruel (5):
MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
phy: stm32: Add support for STM32MP25 COMBOPHY.
arm64: dts: st: Add combophy node on stm32mp251
arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
.../bindings/phy/st,stm32-combophy.yaml | 145 +++++
MAINTAINERS | 6 +
arch/arm64/boot/dts/st/stm32mp251.dtsi | 17 +
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 14 +
drivers/phy/st/Kconfig | 11 +
drivers/phy/st/Makefile | 1 +
drivers/phy/st/phy-stm32-combophy.c | 607 ++++++++++++++++++
7 files changed, 801 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml
create mode 100644 drivers/phy/st/phy-stm32-combophy.c
--
2.34.1
Powered by blists - more mailing lists