[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240818203029.96035-1-marex@denx.de>
Date: Sun, 18 Aug 2024 22:29:52 +0200
From: Marek Vasut <marex@...x.de>
To: linux-arm-kernel@...ts.infradead.org
Cc: Marek Vasut <marex@...x.de>,
Conor Dooley <conor+dt@...nel.org>,
Fabio Estevam <festevam@...il.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
devicetree@...r.kernel.org,
imx@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: imx8mm: Update Data Modul i.MX8M Mini eDM SBC DT to rev.A01
Update the DT to match newest Data Modul i.MX8M Mini eDM SBC rev.A01
board which implements PHY changes. Keep some of the rev.900 PHY node
in the DT so that a DTO can be used to support rev.900 boards easily.
Signed-off-by: Marek Vasut <marex@...x.de>
---
Cc: Conor Dooley <conor+dt@...nel.org>
Cc: Fabio Estevam <festevam@...il.com>
Cc: Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>
Cc: Rob Herring <robh@...nel.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: devicetree@...r.kernel.org
Cc: imx@...ts.linux.dev
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
.../freescale/imx8mm-data-modul-edm-sbc.dts | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index b1f2beb40a98f..472c584fb3bd2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -168,7 +168,7 @@ &fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-handle = <&fec1_phy>;
+ phy-handle = <&fec1_phy_bcm>;
phy-supply = <&buck4_reg>;
fsl,magic-packet;
status = "okay";
@@ -178,7 +178,7 @@ mdio {
#size-cells = <0>;
/* Atheros AR8031 PHY */
- fec1_phy: ethernet-phy@0 {
+ fec1_phy_ath: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
/*
@@ -191,6 +191,7 @@ fec1_phy: ethernet-phy@0 {
reset-deassert-us = <10000>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
+ status = "disabled";
vddio: vddio-regulator {
regulator-name = "VDDIO";
@@ -202,6 +203,20 @@ vddh: vddh-regulator {
regulator-name = "VDDH";
};
};
+
+ /* Broadcom BCM54213PE PHY */
+ fec1_phy_bcm: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ /*
+ * Dedicated ENET_INT# and ENET_WOL# signals are
+ * unused, the PHY does not provide cable detect
+ * interrupt.
+ */
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ };
};
};
--
2.43.0
Powered by blists - more mailing lists