[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <556b7957-802b-4792-a04b-427409807902@linaro.org>
Date: Mon, 19 Aug 2024 17:37:40 +0200
From: neil.armstrong@...aro.org
To: Liu Ying <victor.liu@....com>, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: quic_jesszhan@...cinc.com, maarten.lankhorst@...ux.intel.com,
mripard@...nel.org, tzimmermann@...e.de, airlied@...il.com, daniel@...ll.ch,
robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
thierry.reding@...il.com, sam@...nborg.org
Subject: Re: [PATCH 2/2] drm/panel: simple: Add ON Tat Industrial Company
KD50G21-40NT-A1 panel
On 16/08/2024 10:50, Liu Ying wrote:
> ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
> interface.
>
> The LCD module specification can be found at:
> https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf
>
> Signed-off-by: Liu Ying <victor.liu@....com>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 36 ++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index bf40057c5cf3..89963df80917 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -3478,6 +3478,39 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
> .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> };
>
> +static const struct display_timing ontat_kd50g21_40nt_a1_timing = {
> + .pixelclock = { 30000000, 30000000, 50000000 },
> + .hactive = { 800, 800, 800 },
> + .hfront_porch = { 1, 40, 255 },
> + .hback_porch = { 1, 40, 87 },
> + .hsync_len = { 1, 48, 87 },
> + .vactive = { 480, 480, 480 },
> + .vfront_porch = { 1, 13, 255 },
> + .vback_porch = { 1, 29, 29 },
> + .vsync_len = { 3, 3, 31 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
> + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
> +};
> +
> +static const struct panel_desc ontat_kd50g21_40nt_a1 = {
> + .timings = &ontat_kd50g21_40nt_a1_timing,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 108,
> + .height = 65,
> + },
> + .delay = {
> + .prepare = 147, /* 5 VSDs */
> + .enable = 147, /* 5 VSDs */
> + .disable = 88, /* 3 VSDs */
> + .unprepare = 117, /* 4 VSDs */
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
> /*
> * 800x480 CVT. The panel appears to be quite accepting, at least as far as
> * pixel clocks, but this is the timing that was being used in the Adafruit
> @@ -4837,6 +4870,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "olimex,lcd-olinuxino-43-ts",
> .data = &olimex_lcd_olinuxino_43ts,
> + }, {
> + .compatible = "ontat,kd50g21-40nt-a1",
> + .data = &ontat_kd50g21_40nt_a1,
> }, {
> .compatible = "ontat,yx700wv03",
> .data = &ontat_yx700wv03,
Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists