[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240819185734.372469-1-Frank.Li@nxp.com>
Date: Mon, 19 Aug 2024 14:57:34 -0400
From: Frank Li <Frank.Li@....com>
To: Krzysztof Kozlowski <krzk@...nel.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-kernel@...r.kernel.org (open list:NXP PTN5150A CC LOGIC AND EXTCON DRIVER),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: imx@...ts.linux.dev
Subject: [PATCH v3 1/1] dt-bindings: extcon: ptn5150: add child node port
Add child node 'port' to allow connect to usb controller to do role-switch
if id pin of ptn5150 have not connected to chip's usb ID function pin.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml
Signed-off-by: Frank Li <Frank.Li@....com>
---
Change from v2 to v3
- only add port to existed example.
Change from v1 to v2
- add example for id pin have not connect to main chip's id example.
- commit 095b96b2b fix "port" warning, but add new warning "connector" is
not exist. And follow commit revert this change.
690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
- I have not board in hand to debug why "connector" is not work.
---
.../devicetree/bindings/extcon/extcon-ptn5150.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52dd..0f61cd64e4bc0 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
GPIO pin (output) used to control VBUS. If skipped, no such control
takes place.
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the usb controller for the dual role switch.
+
required:
- compatible
- interrupts
@@ -58,5 +63,12 @@ examples:
interrupt-parent = <&msmgpio>;
interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+
};
};
--
2.34.1
Powered by blists - more mailing lists