| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240819045813.2154642-14-dmitry.torokhov@gmail.com>
Date: Sun, 18 Aug 2024 21:58:10 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Arnd Bergmann <arnd@...db.de>,
Mark Brown <broonie@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Cc: linux-input@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
patches@...nsource.cirrus.com
Subject: [PATCH 13/14] ARM: s3c: crag6410: use software nodes/properties to set up GPIO keys
Switch the gpio-keys device to use software inodes/properties to
describe the buttons and switches. This will allow dropping support
for platform data from the gpio-keys driver in the future.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
arch/arm/mach-s3c/gpio-samsung-s3c64xx.h | 5 ++
arch/arm/mach-s3c/gpio-samsung.c | 35 +++++++++++
arch/arm/mach-s3c/mach-crag6410.c | 80 +++++++++++++++++-------
3 files changed, 99 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
index 8ed144a0d474..7cf16cc085ea 100644
--- a/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
@@ -13,6 +13,8 @@
#ifdef CONFIG_GPIO_SAMSUNG
+#include <linux/property.h>
+
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -89,6 +91,9 @@ enum s3c_gpio_number {
/* define the number of gpios we need to the one after the GPQ() range */
#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+extern const struct software_node samsung_gpiochip_nodes[];
+#define SAMSUNG_GPIO_NODE(node) &samsung_gpiochip_nodes[(node) - 'A']
+
#endif /* GPIO_SAMSUNG */
#endif /* GPIO_SAMSUNG_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index 87daaa09e2c3..82f325112d30 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/of.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/of_address.h>
@@ -788,6 +789,38 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
},
};
+const struct software_node samsung_gpiochip_nodes[] = {
+ SOFTWARE_NODE("GPA", NULL, NULL),
+ SOFTWARE_NODE("GPB", NULL, NULL),
+ SOFTWARE_NODE("GPC", NULL, NULL),
+ SOFTWARE_NODE("GPD", NULL, NULL),
+ SOFTWARE_NODE("GPE", NULL, NULL),
+ SOFTWARE_NODE("GPF", NULL, NULL),
+ SOFTWARE_NODE("GPG", NULL, NULL),
+ SOFTWARE_NODE("GPH", NULL, NULL),
+ SOFTWARE_NODE("GPI", NULL, NULL),
+ SOFTWARE_NODE("GPJ", NULL, NULL),
+ SOFTWARE_NODE("GPK", NULL, NULL),
+ SOFTWARE_NODE("GPL", NULL, NULL),
+ SOFTWARE_NODE("GPM", NULL, NULL),
+ SOFTWARE_NODE("GPN", NULL, NULL),
+ SOFTWARE_NODE("GPO", NULL, NULL),
+ SOFTWARE_NODE("GPP", NULL, NULL),
+ SOFTWARE_NODE("GPQ", NULL, NULL),
+};
+#define NUM_SAMSUNG_GPIOCHIPS ARRAY_SIZE(samsung_gpiochip_nodes)
+
+static void __init samsung_setup_gpiochip_nodes(void)
+{
+ const struct software_node *group[NUM_SAMSUNG_GPIOCHIPS + 1] = { 0 };
+ int i;
+
+ for (i = 0; i < NUM_SAMSUNG_GPIOCHIPS; i++)
+ group[i] = &samsung_gpiochip_nodes[i];
+
+ software_node_register_node_group(group);
+}
+
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
@@ -811,6 +844,8 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
+
+ samsung_setup_gpiochip_nodes();
}
return 0;
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 16b6ef312aaf..6aa74db08af9 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -18,11 +18,13 @@
#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
#include <linux/leds.h>
#include <linux/delay.h>
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/dm9000.h>
@@ -227,32 +229,68 @@ static void __init crag6410_setup_keypad(void)
pr_err("failed to instantiate keypad device");
}
-static struct gpio_keys_button crag6410_gpio_keys[] = {
- [0] = {
- .code = KEY_SUSPEND,
- .gpio = S3C64XX_GPL(10), /* EINT 18 */
- .type = EV_KEY,
- .wakeup = 1,
- .active_low = 1,
- },
- [1] = {
- .code = SW_FRONT_PROXIMITY,
- .gpio = S3C64XX_GPN(11), /* EINT 11 */
- .type = EV_SW,
- },
+static const struct software_node crag6410_gpio_keys_node = {
+ .name = "crag6410-gpio-keys",
};
-static struct gpio_keys_platform_data crag6410_gpio_keydata = {
- .buttons = crag6410_gpio_keys,
- .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
+static const struct property_entry crag6410_suspend_key_props[] = {
+ PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND),
+ PROPERTY_ENTRY_GPIO("gpios",
+ SAMSUNG_GPIO_NODE('L'), 10, /* EINT 18 */
+ GPIO_ACTIVE_LOW),
+ PROPERTY_ENTRY_BOOL("wakeup-source"),
+ { }
};
-static struct platform_device crag6410_gpio_keydev = {
- .name = "gpio-keys",
- .id = 0,
- .dev.platform_data = &crag6410_gpio_keydata,
+static const struct software_node crag6410_suspend_key_node = {
+ .parent = &crag6410_gpio_keys_node,
+ .properties = crag6410_suspend_key_props,
+};
+
+static const struct property_entry crag6410_prox_sw_props[] = {
+ PROPERTY_ENTRY_U32("linux,type", EV_SW),
+ PROPERTY_ENTRY_U32("linux,code", SW_FRONT_PROXIMITY),
+ PROPERTY_ENTRY_GPIO("gpios",
+ SAMSUNG_GPIO_NODE('N'), 11, /* EINT 11 */
+ GPIO_ACTIVE_HIGH),
+ { }
+};
+
+static const struct software_node crag6410_prox_sw_node = {
+ .parent = &crag6410_gpio_keys_node,
+ .properties = crag6410_prox_sw_props,
};
+static const struct software_node *crag6410_gpio_keys_swnodes[] = {
+ &crag6410_gpio_keys_node,
+ &crag6410_suspend_key_node,
+ &crag6410_prox_sw_node,
+ NULL
+};
+
+static void __init crag6410_setup_gpio_keys(void)
+{
+ struct platform_device_info keys_info = {
+ .name = "gpio-keys",
+ .id = 0,
+ };
+ struct platform_device *pd;
+ int err;
+
+ err = software_node_register_node_group(crag6410_gpio_keys_swnodes);
+ if (err) {
+ pr_err("failed to register gpio-keys software nodes: %d\n", err);
+ return;
+ }
+
+ keys_info.fwnode = software_node_fwnode(&crag6410_gpio_keys_node);
+
+ pd = platform_device_register_full(&keys_info);
+ err = PTR_ERR_OR_ZERO(pd);
+ if (err)
+ pr_err("failed to create gpio-keys device: %d\n", err);
+}
+
static struct resource crag6410_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
@@ -393,7 +431,6 @@ static struct platform_device *crag6410_devs0[] __initdata = {
&samsung_device_pwm,
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
- &crag6410_gpio_keydev,
};
static struct platform_device *crag6410_devs1[] __initdata = {
@@ -897,6 +934,7 @@ static void __init crag6410_machine_init(void)
platform_add_devices(crag6410_devs0, ARRAY_SIZE(crag6410_devs0));
crag6410_setup_keypad();
+ crag6410_setup_gpio_keys();
platform_add_devices(crag6410_devs1, ARRAY_SIZE(crag6410_devs1));
--
2.46.0.184.g6999bdac58-goog
Powered by blists - more mailing lists